scholarly journals Flow and Heat Transfer Characteristics of a Turbulent Natural Convection Flow with Sub-Millimeter Bubbles(Thermal Engineering)

2009 ◽  
Vol 75 (757) ◽  
pp. 1830-1837
Author(s):  
Atsuhide KITAGAWA ◽  
Kenji KITADA ◽  
Yoshimichi HAGIWARA
1988 ◽  
Vol 110 (1) ◽  
pp. 116-125 ◽  
Author(s):  
P. A. Litsek ◽  
A. Bejan

The natural convection flow and heat transfer between two enclosures that communicate through a vertical opening is studied by considering the evolution of an enclosed fluid in which the left half is originally at a different temperature than the right half. Numerical experiments show that at sufficiently high Rayleigh numbers the ensuing flow is oscillatory. This and other features are anticipated on the basis of scale analysis. The time scales of the oscillation, the establishment of thermal stratification, and eventual thermal equilibrium are determined and tested numerically. At sufficiently high Rayleigh numbers the heat transfer between the communicating zones is by convection, in accordance with the constant-Stanton-number trend pointed out by Jones and Otis (1986). The range covered by the numerical experiments is 102 < Ra < 107, 0.71 < Pr < 100, and 0.25 < H/L < 1.


Author(s):  
Ali Mohammad Asadian ◽  
Omid Abouali ◽  
Mahmoud Yaghoubi ◽  
Goodarz Ahmadi

The present paper is concerned with the study of flow and heat transfer characteristics in the steady state free convective flow of Al2O3-waternanofluids in a square enclosure in the presence of magnetic field. Attention is given to the temperature variation of the electrical conductivity and its effect on the electromagnetic force induced by the motion of the nanofluid. A new experimental correlation recently presented in the literature was used for this aim. In all the earlier studies in this area the electrical conductivity variation of nanofluid with temperature was neglected. The fluid viscosity and thermal conductivity are assumed to vary as a function of temperature and this variation is modeled using the available experimental correlations. The governing differential equations are solved numerically using finite element method. The features of fluid flow and heat transfer characteristics are analyzed for various strengths of the magnetic field and different nanoparticle volume fractions. The results show that when the inclusion of the variation of the electrical conductivity with temperature in the numerical model noticeably affects the natural convection heat transfer in the studied rectangular cavity. The variations of Nusselt number for natural convection of Al2O3-water nanofluid with nanoparticle volume fractions are presented at various Rayleigh and Hartmann numbers.


1987 ◽  
Vol 109 (2) ◽  
pp. 363-370 ◽  
Author(s):  
C. Beckermann ◽  
S. Ramadhyani ◽  
R. Viskanta

A numerical and experimental study is performed to analyze the steady-state natural convection fluid flow and heat transfer in a vertical rectangular enclosure that is partially filled with a vertical layer of a fluid-saturated porous medium. The flow in the porous layer is modeled utilizing the Brinkman–Forchheimer–extended Darcy equations. The numerical model is verified by conducting a number of experiments, with spherical glass beads as the porous medium and water and glycerin as the fluids, in rectangular test cells. The agreement between the flow visualization results and temperature measurements and the numerical model is, in general, good. It is found that the amount of fluid penetrating from the fluid region into the porous layer depends strongly on the Darcy (Da) and Rayleigh (Ra) numbers. For a relatively low product of Ra × Da, the flow takes place primarily in the fluid layer, and heat transfer in the porous layer is by conduction only. On other hand, fluid penetrating into a relatively highly permeable porous layer has a significant impact on the natural convection flow patterns in the entire enclosure.


2018 ◽  
Vol 10 (1) ◽  
pp. 11-23 ◽  
Author(s):  
A. Akter ◽  
S. Parvin

The laminar natural convection flow and heat transfer inside a trapezoidal cavity filled with air and containing a rectangular block is investigated numerically. The left and right walls of the cavity are cold, the top and bottom walls are adiabatic and the rectangular body is heated uniformly. Finite Element Method of Galerkin’s weighted residual scheme is used to solve the transport equations with appropriate boundary conditions. The main objective of this study is to explore the influence of pertinent parameters such as Rayleigh number, Hartmann number and orientation of the magnetic field on the flow and heat transfer performance of the fluid while the Prandtl number is considered fixed. Results indicate that the heat transfer rate is significantly affected by increasing the mentioned parameters.


Sign in / Sign up

Export Citation Format

Share Document