The effect of bearing surface on risk of periprosthetic joint infection in total hip arthroplasty

2018 ◽  
Vol 100-B (2) ◽  
pp. 134-142 ◽  
Author(s):  
A. T. Hexter ◽  
S. M. Hislop ◽  
G. W. Blunn ◽  
A. D. Liddle
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Observational Studies ◽  
Meta Analysis ◽  
Joint Infection ◽  
Risk Of Bias ◽  
Cochrane Library ◽  
Bearing Surface ◽  
Total Hip

Aims Periprosthetic joint infection (PJI) is a serious complication of total hip arthroplasty (THA). Different bearing surface materials have different surface properties and it has been suggested that the choice of bearing surface may influence the risk of PJI after THA. The objective of this meta-analysis was to compare the rate of PJI between metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), and ceramic-on-ceramic (CoC) bearings. Patients and Methods Electronic databases (Medline, Embase, Cochrane library, Web of Science, and Cumulative Index of Nursing and Allied Health Literature) were searched for comparative randomized and observational studies that reported the incidence of PJI for different bearing surfaces. Two investigators independently reviewed studies for eligibility, evaluated risk of bias, and performed data extraction. Meta-analysis was performed using the Mantel–Haenzel method and random-effects model in accordance with methods of the Cochrane group. Results Our search strategy revealed 2272 studies, of which 17 met the inclusion criteria and were analyzed. These comprised 11 randomized controlled trials and six observational studies. The overall quality of included studies was high but the observational studies were at high risk of bias due to inadequate adjustment for confounding factors. The overall cumulative incidence of PJI across all studies was 0.78% (1514/193 378). For each bearing combination, the overall incidence was as follows: MoP 0.85% (1353/158 430); CoP 0.38% (67/17 489); and CoC 0.53% (94/17 459). The meta-analysis showed no significant difference between the three bearing combinations in terms of risk of PJI. Conclusion On the basis of the clinical studies available, there is no evidence that bearing choice influences the risk of PJI. Future research, including basic science studies and large, adequately controlled registry studies, may be helpful in determining whether implant materials play a role in determining the risk of PJI following arthroplasty surgery. Cite this article: Bone Joint J 2018;100-B:134–42.

Treatment for Chronic Hepatitis C Prior to Total Hip Arthroplasty Significantly Reduces Periprosthetic Joint Infection

2019 ◽  
Vol 34 (1) ◽  
pp. 132-135 ◽  
Author(s):  
Hany S. Bedair ◽  
Brian M. Schurko ◽  
Maureen K. Dwyer ◽  
David Novikov ◽  
Afshin A. Anoushiravani ◽  
...  
Keyword(s):  
Chronic Hepatitis ◽  
Hepatitis C ◽  
Total Hip Arthroplasty ◽  
Chronic Hepatitis C ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Joint Infection ◽  
Total Hip

Recalcitrant Periprosthetic Joint Infection With Iliac Fossa Abscess After Total Hip Arthroplasty

2021 ◽  
Author(s):  
Kuo-Ti Peng ◽  
Tsung-Yu Huang ◽  
Jiun-Liang Chen ◽  
Chiang-Wen Lee ◽  
Hsin-Nung Shih
Keyword(s):  
Total Hip Arthroplasty ◽  
Treatment Failure ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Iliac Fossa ◽  
Joint Infection ◽  
Treatment Success ◽  
Anterolateral Approach ◽  
Total Hip ◽  
Orthopedic Procedure

Abstract Background: Total hip arthroplasty (THA) is a widely used and successfully performed orthopedic procedure for treating severe hip osteoarthritis, rheumatoid arthritis, and avascular necrosis. However, periprosthetic joint infection (PJI) after THA is a devastating complication for patients and orthopedic surgeons. Although surgical technology has been advanced and antibiotic-loaded cemented spacers or beads have developed, the treatment failure rate of one- or two-stage exchange arthroplasty for PJI is reported to be high, with >10% rate of incidence. Therefore, determining the possible pathogenesis and increasing the treatment success rate is a clinically important and urgent issue. Methods: A total of 256 patients with PJI who had undergone THA from 2005 to 2015 were included in this retrospective review. Seven patients required combined ilioinguinal and anterlateoal approach for debridement of iliac fossa abscess and infected hip lesion, included five patients with intraoperative pus leakage from the acetabular inner wall and the other two patients who underwent pre-operative pelvic computed tomography (CT) because of repeat PJI treatment failure. All available data from the medical records from all patients were retrospectively analyzed.Results: Of the 256 patients, seven (3.1%) patients was combined iliac fossa abscess in our cohort. For the microbiologic analysis, a total of thirteen pathogens were isolated from seven recurrent PJI patients with iliac fossa abscess, and Staphylococus aureus was the most commomly pathogen (4 out of 7 cases). The serum white blood cell (WBC) count was decreased significantly two weeks after debridement with combined the ilioinguinal and anterolateral approach compared to the day before surgery (11840/μL vs. 7370/μL; p<0.01), and level of C-reactive protein (CRP) was decreased at postoperative one week (107 mg/dL vs. 47.31 mg/dL; p=0.03). Furthermore, no recurrent infection was found in six revision THA patient in a follow up of 7.1 year. Conclusion: This result suggests that pre-operative pelvic CT and cautious identification of uncertain pus leakage from the inner wall of the acetabulum is essential for the diagnosis of recurrent PJI. Radical debridement with combined ilioinguinal and anterlateoal approach may aviod treatment failure in recurrent PJI with iliac fossa abscess.

Outpatient total hip arthroplasty does not increase complications and readmissions: a meta-analysis

2020 ◽  
pp. 112070002094879
Author(s):  
Vittorio Bordoni ◽  
Niccolò Marelli ◽  
Davide Previtali ◽  
Paolo Gaffurini ◽  
Giuseppe Filardo ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Complication Rate ◽  
Meta Analysis ◽  
Risk Of Bias ◽  
Moderate Risk ◽  
Readmission Rates ◽  
Quality Of Evidence ◽  
Total Hip

Background: There is no consensus about the safety of outpatient total hip arthroplasty (THA). Therefore, the purpose of this meta-analysis was to quantitatively evaluate and compare outpatient and inpatient THA studies in terms of complication and readmission rates. Methods: A systematic search of the literature was performed on 26 July 2019 on PubMed, Web of Science, Cochrane library, and on the grey literature databases. The papers thus collected were used for a meta-analysis comparing outpatient and inpatient THA in terms of complication and readmission rates. Risk of bias and quality of evidence were defined according to Cochrane guidelines. The PRISMA guidelines were used to determine which papers to include in this study. Results: The literature search resulted in 2317 articles; of these, 8 articles were used for the meta-analysis. A total of 66,971 patients were included, of which 1428 were THA outpatients. The overall complication rate for outpatient THAs was 3.0%, while inpatient THAs had an overall complication rate of 4.7%. The readmission rate was 1.4% in outpatient THAs and 3.0% in inpatient THAs. Only 6 studies reported the number of deaths, which ranged from 0% to 0.01%. The included studies present a moderate risk of bias and, according to GRADE guidelines, the level of evidence for complications and readmissions is very low. Conclusions: This meta-analysis documented that outpatient THA is a feasible approach since it does not increase complications or readmissions with respect to inpatient THA, but the available studies present a moderate risk of bias and the quality of evidence of these findings is very low. Future high-level studies are needed to confirm results and indications for outpatient THA.

scholarly journals Metal on Metal Bearing in Total Hip Arthroplasty and Its Impact on Synovial Cell Count

2020 ◽  
Vol 9 (10) ◽  
pp. 3349
Author(s):  
Henrik C. Bäcker ◽  
Chia H. Wu ◽  
David Krüger ◽  
Clemens Gwinner ◽  
Carsten Perka ◽  
...  
Keyword(s):  
Synovial Fluid ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Joint Infection ◽  
Control Group ◽  
Total Hip ◽  
Metal On Metal ◽  
Matching Criteria ◽  
The Impact

Introduction: The effect of different bearings on synovial white blood cell (WBC) count and polymorphonuclear percentage (PMN%) in aspirations remains unclear. Therefore, this study investigates the impact of aseptic Metal-on-Metal (MoM) bearing on synovial fluid. Methods: We searched our arthroplasty registry for aseptic painful THAs with MoM bearings between 2011 and 2018. Then, a case-matched control group was selected with septic and aseptic Total Hip Arthroplasty (THA) with ceramic on a polyethylene (PE) bearing. The matching criteria consisted of gender, age +/−10 years, and time of aspiration (+/−2years). Periprosthetic Joint Infection (PJI) was defined according to the Infectious Diseases Society of America (IDSA), and Musculoskeletal Infection Society (MSIS) using bacterial cultures, sonication and histology. Results: In total, 19 patients who underwent hip aspiration with MoM bearing were identified. Five patients had to be excluded due to insufficient synovial fluid obtained (n = 2) or bacterial growth after sonication that was initially negative with the standard microbiological cultures (n = 3). As such, 14 were included. These patients were matched with 14 aseptic and 14 septic THAs with ceramic on a PE bearing, which constituted the control group. The mean serum chrome level was 20.0 ± 15.5 nmol/L and cobalt level 18.4 ± 22.1 nmol/L. The synovial WBC and PMN% varied significantly between MoM bearing group and the aseptic THA ceramic PE group (both p < 0.001), as well as the septic THA group (WBC p = 0.016, PMN% p < 0.001). Furthermore, the septic THA group had significantly higher CRP values than the aseptic MoM group (p = 0.016). Conclusion: MoM bearing shows significantly higher synovial WBC and PMN% when compared to aseptic THA with ceramic on PE bearing above the MSIS cut-off. This is an important consideration when diagnosing periprosthetic joint infection using the MSIS guidelines.

Outcomes of total hip arthroplasty using dualmobility cups for femoral neck fractures: a systematic review and meta-analysis

2020 ◽  
pp. 112070002092665
Author(s):  
Syed H Mufarrih ◽  
Nada Q Qureshi ◽  
Bassam Masri ◽  
Shahryar Noordin
Keyword(s):  
Systematic Review ◽  
Total Hip Arthroplasty ◽  
Femoral Neck ◽  
Hip Arthroplasty ◽  
Meta Analysis ◽  
Mortality Rates ◽  
Femoral Neck Fractures ◽  
Cochrane Library ◽  
Total Hip ◽  
The Mean

Objectives: Femoral neck fractures (FNFs), with up to 15% mortality, are prominent orthopaedic emergencies. After treating FNFs, dislocation is another challenge increasing morbidity, mortality and treatment costs substantially. The emerging dual-mobility cup (DMC) may decrease dislocation rates following total hip arthroplasty (THA) for FNFs. We performed a systematic review of literature reporting dislocation and mortality rates with DMC-THA for the treatment of FNFs. Methods: 2 authors independently searched PubMed (MEDLINE), Google Scholar and Cochrane library for studies reporting dislocation and mortality rates for FNFs treated with DMC-THA since inception up to January 2019. Data on outcomes of interest was extracted from all studies and assessed for eligibility for a meta-analysis. Results: Out of 522 search results, 18 studies were included in the systematic review and 4 in the meta-analysis. The mean rate of dislocation following DMC-THA for FNFs was found to be 1.87% ± 2.11, with a 1-year mortality rate of 14.0% ± 10.55. Results of meta-analysis showed that dislocation and 1-year postoperative mortality rates were significantly lower for DMC-THA with a risk ratio 0.31 (95% CI, 0.16–0.59; I2 = 0%, p  = 0.0003) and 0.55 (0.40, 0.77; I2 = 0%, p = 0.003) respectively when compared to biploar hemiathroplasty (BHA). Conclusions: The mean dislocation and mortality rates in DMC-THA are lower than previously reported rates for THA with single cup and comparable to unipolar and bipolar hemiarthroplasty. Further research involving randomised control trials to assess differences in outcomes, longevity and cost-effectiveness needs to be conducted to make recommendations for the use of DMC in treating FNFs.

scholarly journals Ceramic bearings for total hip arthroplasty are associated with a reduced risk of revision for infection

2018 ◽  
Vol 28 (3) ◽  
pp. 222-226 ◽  
Author(s):  
Rami Madanat ◽  
Inari Laaksonen ◽  
Stephen E Graves ◽  
Michelle Lorimer ◽  
Orhun Muratoglu ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Lower Risk ◽  
Revision Rate ◽  
Joint Infection ◽  
Bearing Surface ◽  
Related Factors ◽  
Total Hip ◽  
Reduced Risk ◽  
Ceramic On Ceramic

Introduction: Periprosthetic joint infection (PJI) is a serious complication after total hip arthroplasty (THA) and bearing material’s associations to PJI prevalence is largely unknown. The main purposes of this study were to determine if revision for infection varied depending on the type of bearing surface used in primary THA and to study whether patient or implant related factors had an effect on this variation. Methods: A total of 177,237 primary THA procedures from the Australian Registry (AOANJRR) were analysed. 3 bearing surfaces were compared. Metal-on-highly cross-linked polyethylene (MoXP) bearing had been used in 95,129 hips, ceramic-on-highly cross-linked polyethylene (CoXP) in 24,269 hips, and ceramic-on-ceramic (CoC) in 57,839 hips. Revision rates for infection were compared between the 3 groups. Results: Both MoXP and CoXP had a higher revision rate for infection compared to CoC hips (hazard ratio [HR] 1.46 (1.25, 1.72), p < 0.001) and HR 1.42 (1.15, 1.75), p = 0.001 respectively). Patients aged 70 years or less had a lower revision rate for infection when a CoC bearing was used. This difference was independent of sex, and prostheses selection. No difference was evident if the femoral component was cemented or a head size of 28 mm was used. Discussion: In this registry-based material, use of a CoC bearing was associated with a lower risk of revision for infection in patients younger than 70 years when cementless femoral components were used. Further studies are needed to verify this finding.

scholarly journals Periprosthetic joint infection of a total hip arthroplasty with Candida parapsilosis

2020 ◽  
Vol 69 ◽  
pp. 72-75 ◽  
Author(s):  
Laurence Vergison ◽  
Alexander Schepens ◽  
Koen Liekens ◽  
Renata De Kesel ◽  
Hans Van der Bracht ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Periprosthetic Joint Infection ◽  
Candida Parapsilosis ◽  
Joint Infection ◽  
Total Hip
Sign in / Sign up

Export Citation Format

Share Document