Real-time and accurate rail wear measurement method and experimental analysis

2014 ◽  
Vol 31 (8) ◽  
pp. 1721 ◽  
Author(s):  
Zhen Liu ◽  
Fengjiao Li ◽  
Bangkui Huang ◽  
Guangjun Zhang
2017 ◽  
Author(s):  
Peng Chen ◽  
Peijun Wang ◽  
Martin Lauer ◽  
Xiaomin Tang ◽  
Jindong Wang

2011 ◽  
Vol 49 (11) ◽  
pp. 1343-1351 ◽  
Author(s):  
Zhen Liu ◽  
Junhua Sun ◽  
Heng Wang ◽  
Guangjun Zhang

2012 ◽  
Vol 226-228 ◽  
pp. 2050-2055 ◽  
Author(s):  
Shao Feng Dong ◽  
Bao Qiang Du ◽  
Wei Zhou

According to Doppler effect of satellite on the time synchronization technology between satellite and the ground station, a real-time measurement method of Doppler is proposed based on GPS carrier signals. Using Doppler observations from GPS receiver, the method can real-timely measure Doppler frequency shift of GPS including dynamic Doppler and media Doppler whose error can be timely modified in the receiver end. Simulation results show that the frequency shift caused by dynamic Doppler, a main influencing factor in the course of transmission of time-frequency signal by GPS satellite, is between plus or minus several thousands Hz. Comparing to traditional measurement method of Doppler, the method makes it possible to fast track phase of signal in large dynamic range in synchronous technology.


2011 ◽  
Vol 38 (5) ◽  
pp. 0508002 ◽  
Author(s):  
朱玲琳 Zhu Linglin ◽  
曾爱军 Zeng Aijun ◽  
李凡月 Li Fanyue ◽  
黄惠杰 Huang Huijie

2002 ◽  
Vol 124 (4) ◽  
pp. 829-833 ◽  
Author(s):  
Yeau-Ren Jeng ◽  
Zhi-Way Lin ◽  
Shiuh-Hwa Shyu

A method was developed to measure the wear of general engineering surfaces based on the roughness parameters of the worn surfaces. This method does not require any information of the initial surface. The surface height distribution is described using Johnson translatory system where the loss of surface height is attributed to wear. Experiments of engine running in were conducted to validate the method. The results show that the current method can determine wear comparable to surface roughness. The current approach simplifies the profilometrical wear measurement and extends such a measurement to non-Gaussian surfaces.


2015 ◽  
Vol 27 (21) ◽  
pp. 2246-2249 ◽  
Author(s):  
Enmei Shan ◽  
Yi Li ◽  
Ben Xu ◽  
Changyu Shen ◽  
Chunliu Zhao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document