The standard air density of 1.225 kg m−3 is often used in determining the energy output of a wind turbine although the energy output is dependent on a site's air density. By using measurements of temperature, dew-point temperature, and pressure, we calculate the monthly air density of moist tropical climates at two sites in the small-island state of Trinidad and Tobago. In addition, we calculate the energy output of a BOREAS 30 kW small wind turbine using the 10 m level wind speed distribution extrapolated to hub height. The average air densities at Crown Point and Piarco were 1.156 kg m−3 and 1.159 kg m−3, respectively, and monthly air densities at both sites were at most 6% less than standard air density. The difference in energy output of the BOREAS 30 kW calculated using standard air density over that using the local site's air density could provide electrical energy for the continuous monthly operation of 6 light bulbs rated at 50 W at Crown Point and 4 light bulbs at Piarco. Thus, communities interested in implementing wind turbine technologies must use the local air density of the site when sizing a wind turbine system for its needs.
A grid sensitivity study of the Weather Research and Forecasting (WRF) model for simulating surface winds over the small island state of Fiji
