scholarly journals Physical Analysis of Low-dynamic Magnetic Field Impact on Human Tissue

2020 ◽  
Vol 7 (1) ◽  
pp. 14-17 ◽  
Author(s):  
Aleš Richter ◽  
Želmíra Ferková ◽  
Václav Bittner

This article makes an effort to explain physical aspects of low-dynamic magnetic field in the human tissue. The principles of electromagnetic induction in the muscle tissue as a typical example of parts of human body are briefly presented. The problems are indicated by modelling. One of the goals is to warn about different distribution of magnetic field in parts of body caused by metal implants. Another analyse introduces physical and energy differences among individual types of power sources of magnetic field and their dynamic behaviour.

2002 ◽  
Vol 27 (2) ◽  
pp. 165-170 ◽  
Author(s):  
M. GANAPATHI ◽  
G. JOSEPH ◽  
R. SAVAGE ◽  
A. R. JONES ◽  
B. TIMMS ◽  
...  

Metal implants produce susceptibility artefacts in magnetic resonance imaging. We have explored the effects of scaphoid screw characteristics and orientation on MR susceptibility artefact. Titanium alloy, smallness and longitudinal alignment with the z-axis of the main magnetic field reduce the size of the susceptibility artefact.


Author(s):  
Jia Ji Lee ◽  
Chang Hong Pua ◽  
Misni Misran ◽  
Poh Foong Lee

Objectives: Magnetic drug targeting offers the latest popular alternative option to deliver magnetic drug carriers into targeting region body parts through manipulation of an external magnetic field. However, the effectiveness of using an electromagnetic field to manipulate and directing magnetic particles is yet to be established. Methods: In this paper, a homemade cost-effective electromagnet system was built for the purpose of studying the control and directing the magnetic drug carriers. The electromagnet system was built with four electromagnetic sources and tested the capability in directing the particles’ movement in different geometry patterns. Besides that, the creation of the self-rotation of individual magnetic particle clusters was achieved by using fast switching between magnetic fields. This self-rotation allows the possibility of cell apoptosis study to carry out. The system was constructed with four electromagnets integrated with a feedback control system and built to manipulate a droplet of commercially available iron (II, III) oxide nanoparticles to steer the magnetic droplet along different arbitrary trajectories (square, circle, triangle, slanted line) in 2-dimensional. Results: A dynamic magnetic field of 25 Hz was induced for magnetic nanoparticles rotational effect to observe the cell apoptosis. A profound outcome shows that the declining cell viability of the cell lines by 40% and the morphology of shrinking cells after the exposure of the dynamic magnetic field. Conclusion: The outcome from the pilot study gives an idea on the laboratory setup serves as a fundamental model for studying the electromagnetic field strength in applying mechanical force to target and to rotate for apoptosis on cancer cell line study.


2013 ◽  
Vol 55 (6) ◽  
Author(s):  
Venera Dobrica ◽  
Crisan Demetrescu ◽  
Razvan Greculeasa ◽  
Anca Isac

<p>A magnetic induction model has been applied to recordings obtained in 2010 during the field campaigns for geomagnetic measurements at the 26 repeat stations of the Romanian secular variation network. The model is based on the observation that a variable external magnetic field induces a response of the Earth's interior not only by electromagnetic induction, but also by magnetic induction in the magnetic rocks above the Curie temperature. The model computes coefficients of a linear relationship between recorded values of a certain geomagnetic element (X, Y, Z, or F) at the repeat station and recorded X, Y, Z values at a reference station (in this case, SUA observatory). Coefficients depend on magnetic permeabilities of rocks beneath the station and stand as a proxy for the anomaly bias characterizing the site. Maps of the lateral variation of this type of information were obtained and discussed.</p>


2018 ◽  
Vol 168 ◽  
pp. 02004
Author(s):  
Richard Lenhard ◽  
Milan Malcho ◽  
Katarína Kaduchová

In the paper is shown the connection of two toolboxes in an Ansys Workbench solution for induction heating. In Ansys Workbench, Maxwell electromagnetism programs and Fluent have been linked. In Maxwell, a simulation of electromagnetic induction was performed, where data on the magnetic field distribution in the heated material was obtained and then transformed into the Fluent program in which the induction heating simulation was performed.


Sign in / Sign up

Export Citation Format

Share Document