scholarly journals Slotted Circular Microstrip Patch Antenna Designs for multiband Application in Wireless Communication

2012 ◽  
Vol 1 (3) ◽  
pp. 158 ◽  
Author(s):  
Hemant Kumar Gupta ◽  
P.K. Singhal ◽  
Pavan Kumar Sharma ◽  
Veerendra Singh Jadon
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Basic Design ◽  
Multiband Antenna ◽  
Microstrip Patch

The paper present the Circular Microstrip Patch Antenna designs with slit-slot for multiband purpose in wireless communication. We have designed a circular microstrip patch antenna (CMPA) for 1.3GHz used in wireless communication. We have designed CMPA with 2slit slot, 3slit-slot, and 6slit-slot and observed results for different designs, and finally it is shown that as slit-slot increases to six slit-slot Return-loss and Bandwidth of CMPA are reduced.The multiband antenna use for wireless communication in different applications. Bandwidth improvement is about 63.3%, 72.10% and 37.5% respectively in two, three and six slit-slotted patch when compared to their basic design bandwidth band. Antenna is changed to multiband by slit-slot Circular Microstrip Patch Antenna (CMPA).

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

scholarly journals A Butterfly-Shaped Wideband Microstrip Patch Antenna for Wireless Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Liling Sun ◽  
Maowei He ◽  
Jingtao Hu ◽  
Yunlong Zhu ◽  
Hanning Chen
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Frequency Identification

A novel butterfly-shaped patch antenna for wireless communication is introduced in this paper. The antenna is designed for wideband wireless communications and radio-frequency identification (RFID) systems. Two symmetrical quasi-circular arms and two symmetrical round holes are incorporated into the patch of a microstrip antenna to expand its bandwidth. The diameter and position of the circular slots are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by means of a prototype having a bandwidth of about 40.1%. The return loss of the butterfly-shaped antenna is greater than 10 dB between 4.15 and 6.36 GHz. The antenna can serve simultaneously most of the modern wireless communication standards.

scholarly journals 2.4 GHz Microstrip Patch Antenna for S-Band Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012029
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhir ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communication ◽  
Patch Antenna ◽  
High Performance ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Size ◽  
Microstrip Patch ◽  
Low Profile ◽  
Design And Manufacture

Abstract For any wireless communication, the antenna plays a very important role. The request for this technology is reduced antenna size, weight, and cost with a low profile, high performance, and low return loss (RL). To meet these requirements, the microstrip patch antenna (MPA) can be used. This research represents the design and manufacture of the MPA for the 2.4 GHz applications with very low RL and perfect voltage standing wave ratio (VSWR). Computer simulation technology (CST) studio is used to design and simulation. The proposed MPA is fabricated on flame retardant (FR-4) material as a substrate. The results show that the MPA is capable to deal with RL of -38.86 dB at the frequency of 2.393 GHz with a bandwidth (BW) of 58 MHz and VSWR of 1.02. The volume of the antenna is 75.85 × 57.23 × 1.6 mm 3.

Metamaterial Structure with Negative μ and ε for reduction of return loss of Microstrip Patch Antenna

2012 ◽  
Vol 2 (8) ◽  
pp. 130-133
Author(s):  
Amandeep Singh Amandeep Singh ◽  
◽  
Sankul Agarwal ◽  
Vaibhav Sharma ◽  
Shivam Pandita
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Metamaterial Structure ◽  
Microstrip Patch

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

scholarly journals A Novel Frequency Reconfigurable Microstrip Patch Antenna using Pin Diode

2020 ◽  
Vol 9 (5) ◽  
pp. 2013-2017
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Pin Diode ◽  
Optimum Level ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Single Antenna ◽  
Specific Frequency ◽  
Switching State

In recent study, in the growth of wireless technology single antenna that works with a specific frequency is becoming outdated. The antenna which is capable to work dynamically is encouraged. To make an antenna to work dynamically, modification in any of the antenna characteristics can be applied. In this proposed work, the antenna which can reconfigure its frequency is designed and analyzed. Microstrip patch antenna is most popular printed type antenna which is suitable for diverse applications. The antenna design consists of three PIN diodes which are placed in different positions on the patch. Depending upon the switching state of PIN diode the antenna can operate in different frequency ranges. The frequency range obtained ranges from 1.38 GHz to 3.24 GHz. Return loss value, VSWR obtained is of optimum level. The various gain of antenna is obtained in simulation. The analysis of the antenna is done in ANSYS HFSS software.

Sign in / Sign up

Export Citation Format

Share Document