scholarly journals Comparative study of four indoor empirical propagation models for campus wireless network

2019 ◽  
Vol 7 (4) ◽  
pp. 154-160
Author(s):  
Fransiska Sisilia Mukti

Propagation is one of the important factors to understand in wireless communication systems. Prediction of the value of propagation, especially for closed areas, is very necessary to determine success in building wireless networks. Various kinds of propagation modeling were developed to find the best approach to calculate the value of signal losses. A comparative study of 4 types of empirical propagation modeling was made to provide the most suitable propagation modeling analysis for campus wireless networks. The ITU-R model (P.1238) provides predictive results that are closest to the actual data in the field, with a relative error rate of 16.381%.

2021 ◽  
Author(s):  
Ashok kumar ◽  
Rajveer Singh Yaduvanshi

Abstract In this article Spherical DRA has been formulated , simulated and proto type developed. The detailed theoretical analysis along with simulations and measured results at 5.8 GHz have been presented in this article. The SDRA at 5.8 GHz covering 5G frewuenci band. The proposed design antenna provides the gain of 7.3 dB and return loss -25 dB. The measured results are in good match with simulated result. The proposed SDRA are good for 5G wireless networks, as well as other sub-6 band in wireless communication systems.


2020 ◽  
Vol 23 (1) ◽  
pp. 159-171
Author(s):  
Ahmad Baheej

The multipath phenomenon is a major factor that is continually affected negatively the performance of wireless communication systems. Since the receiver gets different copies of the transmitted signal from various paths at different times. Consequently, destructive or constructive interference can occur. Therefore, the performance of wireless communication systems is poor in term of bit error rate. This phenomenon can be taken as an advantage if the multiple – input – multiple – output antenna systems are employed at both transmitter and receiver sides (antenna diversity) to improve the bit error rate performance. This paper focuses on the combination of multipath forward error correction diversity technique with vertical-Bell laboratories layered space-time coding. This will lead to enhance the bit error rate in wireless communication systems. The proposed system used Rayleigh and additive white Gaussian noise as two different channel models. The multipath forward error correction diversity technique treats the multipath propagated signals as unessential copies, to utilise them to enhance the bit error rate limitation in the multiple – input – multiple – output systems. The simulation results showed that the performance of the proposed system can be gradually improved by increasing the number of utilised multipath signals in the multipath forward error correction diversity technique


Sign in / Sign up

Export Citation Format

Share Document