Comparing battery electric vehicle powertrains through rapid component sizing

AbstractThis paper describes the CO2 emissions of the additional electricity generation needed in Germany for battery electric vehicles. Different scenarios drawn up by the transmission system operators in past and for future years for expansion of the energy sources of electricity generation in Germany are considered. From these expansion scenarios, hourly resolved real-time simulations of the different years are created. Based on the calculations, it can be shown that even in 2035, the carbon footprint of a battery electric vehicle at a consumption of 22.5 kWh/100 km including losses and provision will be around 100 g CO2/km. Furthermore, it is shown why the often-mentioned German energy mix is not suitable for calculating the emissions of a battery electric vehicle fleet. Since the carbon footprint of a BEV improves significantly over the years due to the progressive expansion of renewable-energy sources, a comparison is drawn at the end of this work between a BEV (29.8 tons of CO2), a conventional diesel vehicle (34.4 tons of CO2), and a diesel vehicle with R33 fuel (25.8 tons of CO2) over the entire useful life.

Download Full-text

A Component-Sizing Methodology for a Hybrid Electric Vehicle Using an Optimization Algorithm

Energies ◽

10.3390/en14113147 ◽

2021 ◽

Vol 14 (11) ◽

pp. 3147

Author(s):

Kiyoung Kim ◽

Namdoo Kim ◽

Jongryeol Jeong ◽

Sunghwan Min ◽

Horim Yang ◽

...

Keyword(s):

Energy Efficiency ◽

Electric Vehicle ◽

Optimization Algorithm ◽

Hybrid Electric Vehicle ◽

New Technologies ◽

New Technology ◽

Dynamic Performance ◽

Minimum Principle ◽

Component Sizing ◽

Hybrid Electric

Many leading companies in the automotive industry have been putting tremendous effort into developing new powertrains and technologies to make their products more energy efficient. Evaluating the fuel economy benefit of a new technology in specific powertrain systems is straightforward; and, in an early concept phase, obtaining a projection of energy efficiency benefits from new technologies is extremely useful. However, when carmakers consider new technology or powertrain configurations, they must deal with a trade-off problem involving factors such as energy efficiency and performance, because of the complexities of sizing a vehicle’s powertrain components, which directly affect its energy efficiency and dynamic performance. As powertrains of modern vehicles become more complicated, even more effort is required to design the size of each component. This study presents a component-sizing process based on the forward-looking vehicle simulator “Autonomie” and the optimization algorithm “POUNDERS”; the supervisory control strategy based on Pontryagin’s Minimum Principle (PMP) assures sufficient computational system efficiency. We tested the process by applying it to a single power-split hybrid electric vehicle to determine optimal values of gear ratios and each component size, where we defined the optimization problem as minimizing energy consumption when the vehicle’s dynamic performance is given as a performance constraint. The suggested sizing process will be helpful in determining optimal component sizes for vehicle powertrain to maximize fuel efficiency while dynamic performance is satisfied. Indeed, this process does not require the engineer’s intuition or rules based on heuristics required in the rule-based process.

Download Full-text

Recent progress in battery electric vehicle noise, vibration, and harshness

Science Progress ◽

10.1177/00368504211005224 ◽

2021 ◽

Vol 104 (1) ◽

pp. 003685042110052

Author(s):

Xia Hua ◽

Alan Thomas ◽

Kurt Shultis

Keyword(s):

Electric Vehicle ◽

Recent Progress ◽

Combustion Engine ◽

Automatic Transmission ◽

Battery Electric Vehicle ◽

Vehicle Noise ◽

Conventional Vehicle ◽

Transfer Case ◽

Air Intake ◽

Noise Vibration

As battery electric vehicle (BEV) market share grows so must our understanding of the noise, vibration, and harshness (NVH) phenomenon found inside the BEVs which makes this technological revolution possible. Similar to the conventional vehicle having encountered numerous NVH issues until today, BEV has to face many new and tough NVH issues. For example, conventional vehicles are powered by the internal combustion engine (ICE) which is the dominant noise source. The noises from other sources were generally masked by the combustion engine, thus the research focus was on the reduction of combustion engine while less attention was paid to noises from other sources. A BEV does not have ICE, automatic transmission, transfer case, fuel tank, air intake, or exhaust systems. In their place, there is more than enough space to accommodate the electric drive unit and battery pack. BEV is quieter without a combustion engine, however, the research on vehicle NVH is even more significant since the elimination of the combustion engine would expose many noise behaviors of BEV that were previously ignored but would now seem clearly audible and annoying. Researches have recently been conducted on the NVH of BEV mainly emphasis on the reduction of noise induced by powertrain, tire, wind and ancillary system and the improvement of sound quality. This review paper will focus on recent progress in BEV NVH research to advance the BEV systems in the future. It is a review for theoretical, computational, and experimental work conducted by both academia and industry in the past few years.

Download Full-text