The mineralogy, texture and significance of silica derived from alteration by steam condensate in three New Zealand geothermal fields

ENERGYO ◽  
2018 ◽  
Author(s):  
K. A. Rodgers ◽  
K. L. Cook ◽  
P. R. L. Browne ◽  
K. A. Campbell
Clay Minerals ◽  
2002 ◽  
Vol 37 (2) ◽  
pp. 299-322 ◽  
Author(s):  
K. A. Rodgers ◽  
K. L. Cook ◽  
P. R. L. Browne ◽  
K. A. Campbell

AbstractOpaline silica residue accumulates on the surface and in the near surface of the Te Kopia, Tikitere and Rotokawa geothermal fields, where rhyolitic tuffs are attacked by steam condensate, made acid (pH 2–3) by sulphuric acid produced by oxidation of H2S that accompanies steam discharge. Silica residue is one product of this alteration process that also yields kaolinite, sulphur, sulphide and aluminous sulphates, including alunite and alunogen, as pH, Eh and available moisture fluctuate across the field surface. Coagulation of colloidal polymeric silica or, possibly, direct deposition of monomeric silica can occur from the acid solutions of the digested country rock, depending on pH, concentration, temperature and the presence and concentration of other species. As with silica sinter, the first-formed silica phase consists of disordered opal-A microspheroids, commonly 0.1–5 μm in diameter. These coalesce and become overgrown by further opaline silica to yield a mass resembling gelatinous ‘frog spawn’ that lines cavities and envelops surfaces. This mass is the principle component of botryoidal, transparent to translucent hyalite that comprises much residue. Following deposition, this juvenile residue may crystallize to opal-CT lepispheres, 1–3 μm across and, subsequently, to chalcedonic quartz. Both the opal-A and opal-CT of the New Zealand residues are more disordered than those occurring in typical moderate- to low-temperature sinters. The opaline silica of silica residues enjoys a reaction relationship with both kaolinite and aluminium sulphates, including alunite and alunogen. These phases and the silica precipitate continuously and undergo dissolution at the surface of all three localities. The precise pathway followed depends upon the prevailing surface conditions, including humidity, pH, Eh, and Al and K activities. As Al is flushed from the system, the ultimate stage of alteration that may result is the dissolution of the silica itself in acidified rainwater, fogdrip or further steam condensate.


2016 ◽  
Vol 314 ◽  
pp. 39-48 ◽  
Author(s):  
W. Heise ◽  
T.G. Caldwell ◽  
E.A. Bertrand ◽  
G.J. Hill ◽  
S.L. Bennie ◽  
...  

Geothermics ◽  
2000 ◽  
Vol 29 (4-5) ◽  
pp. 479-497 ◽  
Author(s):  
Rick G. Allis ◽  
Xiaoyong Zhan

2019 ◽  
Vol 220 (1) ◽  
pp. 1-17 ◽  
Author(s):  
Stefan Mroczek ◽  
Martha K Savage ◽  
Chet Hopp ◽  
Steven M Sewell

SUMMARY We investigate the relation between geothermal field production and fracture density and orientation in the Ngatamariki and Rotokawa geothermal fields, located in the Taupo Volcanic Zone, New Zealand using shear wave splitting (SWS). We determine the SWS parameters for 17 702 microseismic events across 38 stations spanning close to 4 yr from 2012 to 2015. We compare the strength of anisotropy to changes in field production and injection. We also compare the orientation of the anisotropy to in situ and regional measurements of maximum horizontal stress orientation. ($S_{\mathrm{ H}_{\mathrm{ max}}}$). Due to the volume of unique events (approximately 160 000), shear wave phases are picked automatically. We carry out automatic SWS measurements using the Multiple Filter Automatic Splitting Technique (MFAST). The SWS measurements are interpreted in the context of stress aligned microcracks. Outside both fields and within Ngatamariki, fast polarizations align with the NE–SW regional orientation of $S_{\mathrm{ H}_{\max}}$. Within Rotokawa a greater complexity is observed, with polarizations tending toward N–S. We observe increases in per cent anisotropy coinciding with the start of production/injection in Ngatamariki and then a later correlated drop in per cent anisotropy and vP/vS ratios in southern Ngatamariki as injection is shifted to the north. This relationship is consistent with pore fluid pressure within the reservoir being affected by local changes in production and injection of geothermal fluids causing cracks to open and close in response.


Sign in / Sign up

Export Citation Format

Share Document