scholarly journals Three combined pretreatments for reactive gasification feedstock from wet coffee grounds waste

2021 ◽  
Vol 10 (1) ◽  
pp. 169-177
Author(s):  
Isao Hasegawa ◽  
Tatsuya Tsujiuchi ◽  
Kazuhiro Mae

Abstract In this study, a new pretreatment for using wet food biomass waste as a high calorific and reactive feedstock for gasification is presented. The method involves the addition of calcium hydroxide, hot water treatment, and dewatering in vegetable oil. Hot water treatment at 230°C reduced the oxygen/carbon atomic ratio of coffee grounds waste to improve the calorific value, but this treatment also formed an inactive cross-linked structure caused by dehydration reactions. By mixing the coffee grounds waste with calcium hydroxide powder before the hot water treatment, cross-linking was suppressed and the gasification rate of the char significantly increased because of the catalytic effect. With or without hot water treatment, the time required to complete gasification for the chars of the grounds mixed with calcium hydroxide was reduced to about one-third of that for the char of the untreated grounds. After heating in vegetable oil at 150°C, moisture was completely removed from the coffee grounds and they became impregnated with a large amount of the oil. As dewatering in oil did not affect the gasification rate of the chars, a combination of these three treatments was found to efficiently convert wet food biomass waste into a gasification feedstock.

2021 ◽  
Vol 27 ◽  
pp. 102284
Author(s):  
Jakub Pečenka ◽  
Zuzana Bytešníková ◽  
Tomáš Kiss ◽  
Eliška Peňázová ◽  
Miroslav Baránek ◽  
...  

MRS Advances ◽  
2021 ◽  
Author(s):  
Quinshell Smith ◽  
Kenneth Burnett ◽  
Nawzat Saadi ◽  
Khulud Alotaibi ◽  
Atikur Rahman ◽  
...  

Author(s):  
Mohammad Khairul Basher ◽  
S. M. Shah Riyadh ◽  
Md. Khalid Hossain ◽  
Mahmudul Hassan ◽  
Md. Abdur Rafiq Akand ◽  
...  

Zinc-oxide (ZnO) nanostructures including nanorods are currently considered as a pioneer research of interest world-wide due to their excellent application potentials in various applied fields especially for the improvement of energy harvesting photovoltaic solar cells (PSC). We report on the growth and morphological properties of zinc-oxide (ZnO) nanorods grown on the surface of plain zinc (non-etched and chemically etched) plates by using a simple, economical, and environment-friendly technique. We apply hot water treatment (HWT) technique to grow the ZnO nanorods and varies the process parameters, such as temperature and the process time duration. The morphological, and elemental analysis confirm the agglomeration of multiple ZnO nanorods with its proper stoichiometry. The obtained nanostructures for different temperatures with different time duration showed the variation in uniformity, density, thickness and nanonorods size. The ZnO nanorods produced on the etched zinc surface were found thicker and uniform as compared to those grown on the non-etched zinc surface. This chemically etched Zinc plates preparation can be an easy solution to grow ZnO nanorods with high density and uniformity suitable for PSC applications such as to enhance the energy conversion efficiency of the photovoltaic (PV) solar cells towards the future sustainable green earth.


1969 ◽  
Vol 40 (1) ◽  
pp. 67-69
Author(s):  
José Adsuar

Chlorotic streak, a virus disease of sugarcane, is known to occur in Puerto Rico and to cause a reduction in germination, tillering, and yield of sugarcane per acre. Immersion of the infected cane in hot water at 52° C. for 20 minutes inactivated the virus and increased the yield of cane and sugar. It is also known that the hot-water treatment may adversely affect the germination of the different varieties. Thirteen of the best sugarcane varieties as recommended by this Agricultural Experiment Station were tested for susceptibility to the hot-water treatment. The treatment adversely affected the germination percentage of M. 336, B. 41227, and Co. 281. It stimulated the germination of varieties H. 328560, P.R. 1000, B. 37161, B. 40105, B. 37172, B. 371933, P.R. 907, and P.R. 902. It had no significant effect on the germination of P.R. 905 and P.R. 980.


1969 ◽  
Vol 46 (4) ◽  
pp. 272-283
Author(s):  
William Pennock ◽  
Gilberto Maldonado

1. Anthracnose damage was greatly reduced in mango fruit picked at shipping maturity and immersed in hot water before storage and subsequent ripening. 2. The equipment and method of treating the fruits are described and discussed. 3. A precise technique which was devised for measuring anthracnose damage before and after storage is also described. 4. Immersion of the fruit for 15 minutes in water held at temperatures between 51° C. and 51.5° C., with a safety margin of 0.5° C., is recommended for commercial practice before packing and shipment. Water temperature must be kept below 52° C. to prevent possible scalding of the fruit.


Sign in / Sign up

Export Citation Format

Share Document