Intra-channel Cross-Phase Modulation Effect in Dispersion Compensated Single Channel Lightwave System with Negative Residual Dispersion

2015 ◽  
Vol 36 (3) ◽  
Author(s):  
Nitu Syed ◽  
Mohammad Faisal
Keyword(s):  
Phase Shift ◽  
Phase Modulation ◽  
High Speed ◽  
Single Channel ◽  
Optical Fiber Communication ◽  
Cross Phase Modulation ◽  
Fiber Communication ◽  
Transmission Distance ◽  
Analytical Estimation ◽  
The Impact

AbstractAdvanced modulation schemes, particularly the phase-modulated signals, have already drawn huge research interests for ultra-high speed long-haul lightwave transmission systems. We have considered 40 Gbit/s optical RZ pulse propagating in a periodically dispersion managed (DM) single channel system with negative residual dispersion. We investigate the effects of negative residual dispersion on intra-channel cross-phase modulation (IXPM)-induced phase shift. Analytical estimation for phase shift has been deduced using perturbed variational formulation. We therefore explore the impact of variation of various parameters such as transmission distance, duty cycle, bit rate, etc. on phase shift. The outcome of our work is to explore the performance of the dispersion compensated system with some negative residual dispersion so that the IXPM-induced phase shift remains low in optical fiber communication.

Novel Manchester-Based Multilevel Signaling for High-Speed Optical Communication Systems

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Festus Idowu Oluwajobi ◽  
Nguyen Dong-Nhat ◽  
Amin Malekmohammadi
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Chromatic Dispersion ◽  
Optical Fiber Communication ◽  
Pulse Amplitude ◽  
Calculation Model ◽  
Fiber Communication ◽  
Receiver Sensitivity ◽  
Communication Links ◽  
Dispersion Tolerance

AbstractIn this paper, the performance of a novel multilevel signaling based on Manchester code namely four-level Manchester Coding (4-MC) technique is investigated for next generation high-speed optical fiber communication links. The performance of 4-MC is studied and compared with conventional Manchester modulation and four-level pulse amplitude modulation (4-PAM) formats in terms of receiver sensitivity, spectral efficiency and dispersion tolerance at the bit rate of 40 Gb/s. The bit error rate (BER) calculation model for the proposed multilevel scheme has also been developed. The calculated receiver sensitivity and the chromatic dispersion tolerance at the BER of 10–9 of the proposed scheme are −22 dBm and 67.5 ps/nm, respectively. It is observed that, 4-MC scheme is superior in comparison to 4-PAM by 3.5 dB in terms of receiver sensitivity in back-to-back scenario. Therefore, the proposed scheme can be considered as an alternative to current 4-PAM system.

High-Speed In-Vehicle Optical Fiber Communication

2019 ◽  
Vol 75 (5) ◽  
pp. P-258-P-261
Author(s):  
OKIHIRO SUGIHARA ◽  
SATOSHI TAKAHASHI
Keyword(s):  
Optical Fiber ◽  
High Speed ◽  
Optical Fiber Communication ◽  
Fiber Communication

Analysis of Compensation for Inter-Mode Nonlinear Phase Modulation in Few-Mode Optical Fiber Communication Systems

2019 ◽  
Vol 39 (12) ◽  
pp. 1206006
Author(s):  
王瑜浩 Wang Yuhao ◽  
武保剑 Wu Baojian ◽  
万峰 Wan Feng ◽  
文峰 Wen Feng
Keyword(s):  
Optical Fiber ◽  
Phase Modulation ◽  
Communication Systems ◽  
Optical Fiber Communication ◽  
Fiber Communication ◽  
Nonlinear Phase

scholarly journals Mitigating the Impact of Noise on Nonlinear Frequency Division Multiplexing

2020 ◽  
Vol 10 (24) ◽  
pp. 9099
Author(s):  
Stella Civelli ◽  
Enrico Forestieri ◽  
Marco Secondini
Keyword(s):  
Dispersion Compensation ◽  
Kerr Nonlinearity ◽  
Optical Fiber Communication ◽  
Frequency Division Multiplexing ◽  
Nonlinear Frequency ◽  
Frequency Division ◽  
Fiber Communication ◽  
Range Rate ◽  
Conventional Systems ◽  
The Impact

In the past years, nonlinear frequency division multiplexing (NFDM) has been investigated as a potentially revolutionary technique for nonlinear optical fiber communication. However, while NFDM is able to exploit the Kerr nonlinearity, its performance lags behind that of conventional systems. In this work, we first highlight that current implementations of NFDM are strongly suboptimal, and, consequently, oversensitive to noise: the modulation does not ensure a large minimum distance between waveforms, while the detection is not tailored to the statistics of noise. Next, we discuss improved detections strategies and modulation techniques, proposing some effective approaches able to improve NFDM. Different flavors of NFDM are compared through simulations, showing that (i) the NFDM performance can be significantly improved by employing more effective detection strategies, with a 5.6 dB gain in Q-factor obtained with the best strategy compared to the standard strategy; (ii) an additional gain of 2.7 dB is obtained by means of a simple power-tilt modulation strategy, bringing the total gain with respect to standard NFDM to 8.3 dB; and (iii) under some parameters range (rate efficiency η≤30%), the combination of improved modulation and detection allows NFDM to outperform conventional systems using electronic dispersion compensation.

Sign in / Sign up

Export Citation Format

Share Document