scholarly journals Free Vibrations of Uniform Timoshenko Beams on Pasternak Foundation Using Coupled Displacement Field Method

2017 ◽  
Vol 64 (3) ◽  
pp. 359-373
Author(s):  
Korabathina Rajesh ◽  
Koppanati Meera Saheb
Keyword(s):  
Displacement Field ◽  
Slenderness Ratio ◽  
Ritz Method ◽  
Field Method ◽  
Free Vibrations ◽  
Pasternak Foundation ◽  
Structural Element ◽  
Plates And Shells ◽  
Clamped Beams ◽  
Foundation Parameters

Abstract Complex structures used in various engineering applications are made up of simple structural members like beams, plates and shells. The fundamental frequency is absolutely essential in determining the response of these structural elements subjected to the dynamic loads. However, for short beams, one has to consider the effect of shear deformation and rotary inertia in order to evaluate their fundamental linear frequencies. In this paper, the authors developed a Coupled Displacement Field method where the number of undetermined coefficients 2n existing in the classical Rayleigh-Ritz method are reduced to n, which significantly simplifies the procedure to obtain the analytical solution. This is accomplished by using a coupling equation derived from the static equilibrium of the shear flexible structural element. In this paper, the free vibration behaviour in terms of slenderness ratio and foundation parameters have been derived for the most practically used shear flexible uniform Timoshenko Hinged-Hinged, Clamped-Clamped beams resting on Pasternak foundation. The findings obtained by the present Coupled Displacement Field Method are compared with the existing literature wherever possible and the agreement is good.

Large Amplitude Free Vibration of Shallow Spherical Shell on a Pasternak Foundation

1993 ◽  
Vol 115 (1) ◽  
pp. 70-74 ◽  
Author(s):  
D. N. Paliwal ◽  
V. Bhalla
Keyword(s):  
Free Vibration ◽  
Spherical Shell ◽  
Large Amplitude ◽  
Free Vibrations ◽  
Numerical Results ◽  
Shallow Spherical Shell ◽  
Pasternak Foundation ◽  
New Approach ◽  
Foundation Parameters ◽  
Clamped Edges

Large amplitude free vibrations of a clamped shallow spherical shell on a Pasternak foundation are studied using a new approach by Banerjee, Datta, and Sinharay. Numerical results are obtained for movable as well as immovable clamped edges. The effects of geometric, material, and foundation parameters on relation between nondimensional frequency and amplitude have been investigated and plotted.

scholarly journals Large Amplitude Free Vibration Analysis of Tapered Timoshenko Beams Using Coupled Displacement Field Method

2018 ◽  
Vol 23 (3) ◽  
pp. 673-688 ◽  
Author(s):  
K. Rajesh ◽  
K.M. Saheb
Keyword(s):  
Fundamental Frequency ◽  
Displacement Field ◽  
Large Amplitude ◽  
Amplitude Ratio ◽  
Slenderness Ratio ◽  
Maximum Amplitude ◽  
Free Vibration Analysis ◽  
Free Vibrations ◽  
Timoshenko Beams ◽  
Functional Requirements

Abstract Tapered beams are more efficient compared to uniform beams as they provide a better distribution of mass and strength and also meet special functional requirements in many engineering applications. In this paper, the linear and non-linear fundamental frequency parameter values of the tapered Timoshenko beams are evaluated by using the coupled displacement field (CDF) method and closed form expressions are derived in terms of frequency ratio as a function of slenderness ratio, taper ratio and maximum amplitude ratio for hinged-hinged and clamped-clamped beam boundary conditions. The effectiveness of the CDF method is brought out through the solution of the large amplitude free vibrations, in terms of fundamental frequency of tapered Timoshenko beams with axially immovable ends. The results obtained by the present CDF method are validated with the existing literature wherever possible.

Free Vibrations of Thick, Complete Conical Shells of Revolution From a Three-Dimensional Theory

2005 ◽  
Vol 72 (5) ◽  
pp. 797-800 ◽  
Author(s):  
Jae-Hoon Kang ◽  
Arthur W. Leissa
Keyword(s):  
Ritz Method ◽  
Three Dimensional ◽  
Axial Direction ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Vibration Frequencies ◽  
Shells Of Revolution ◽  
Dimensional Theory ◽  
Conical Shells ◽  
Cylindrical Coordinate

A three-dimensional (3D) method of analysis is presented for determining the free vibration frequencies and mode shapes of thick, complete (not truncated) conical shells of revolution in which the bottom edges are normal to the midsurface of the shells based upon the circular cylindrical coordinate system using the Ritz method. Comparisons are made between the frequencies and the corresponding mode shapes of the conical shells from the authors' former analysis with bottom edges parallel to the axial direction and the present analysis with the edges normal to shell midsurfaces.

Analysis of In-Plane Modal Characteristics of an Annular Disk With Multiple Point Supports

2009 ◽  
Author(s):  
S. Bashmal ◽  
R. Bhat ◽  
S. Rakheja
Keyword(s):  
Finite Element ◽  
Orthogonal Polynomials ◽  
Ritz Method ◽  
Element Model ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Multiple Point ◽  
Annular Disk ◽  
Free Boundary Conditions ◽  
Boundary Characteristic

In-plane free vibrations of an isotropic, elastic annular disk constrained at some points on the inner and outer boundaries are investigated. The presented study is relevant to various practical problems including disks clamped by bolts along the inner and outer edges or the railway wheel vibrations. The boundary characteristic orthogonal polynomials are employed in the Rayleigh-Ritz method to obtain the frequency parameters and the associated mode shapes. The boundary characteristic orthogonal polynomials are generated for the free boundary conditions of the disk while artificial springs are used to realize clamped conditions at discrete points. The frequency parameters for different point constraint conditions are evaluated and compared with those computed from a finite element model to demonstrate the validity of the proposed method. The computed mode shapes are presented for a disk with different point constraints at the inner and outer boundaries to demonstrate the free in-plane vibration behavior of the disk. Results show that addition of point supports causes some of the modes to split into two different frequencies with different mode shapes. The effects of different orientations of multiple point supports on the frequency parameters and mode shapes are also discussed.

scholarly journals Modelling Plates and Shells by Means of the Rigid Finite Element Method

2015 ◽  
Vol 62 (1) ◽  
pp. 101-114 ◽  
Author(s):  
Iwona Adamiec-Wójcik ◽  
Andrzej Nowak ◽  
Stanisław Wojciech
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Free Vibrations ◽  
The Finite Element Method ◽  
Hybrid Finite Element Method ◽  
Hybrid Finite Element ◽  
Rigid Finite Element Method ◽  
Plates And Shells ◽  
Single Set ◽  
Element Method

Abstract The rigid finite element method (RFEM) has been used mainly for modelling systems with beam-like links. This paper deals with modelling of a single set of electrodes consisting of an upper beam with electrodes, which are shells with complicated shapes, and an anvil beam. Discretisation of the whole system, both the beams and the electrodes, is carried out by means of the rigid finite element method. The results of calculations concerned with free vibrations of the plates are compared with those obtained from a commercial package of the finite element method (FEM), while forced vibrations of the set of electrodes are compared with those obtained by means of the hybrid finite element method (HFEM) and experimental measurements obtained on a special test stand.

Sign in / Sign up

Export Citation Format

Share Document