scholarly journals Preparation of efficient piezoelectric PVDF–HFP/Ni composite films by high electric field poling

2022 ◽  
Vol 11 (1) ◽  
pp. 452-462
Author(s):  
Dan Lei ◽  
Ning Hu ◽  
Liangke Wu ◽  
Rongyi Huang ◽  
Alamusi Lee ◽  
...  

Abstract Poly(vinylidene fluoride) (PVDF) and its copolymers have been widely studied due to their excellent piezoelectricity and ferroelectricity. In this study, composite films are prepared by adding Ni nanoparticles (0.00–0.3 wt%) into poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF–HFP) matrix by solution casting, uniaxial stretching, and high electric field poling. It is found that when the maximum electric field E max for poling is 130 MV m−1, the calibrated open circuit voltage of the pure PVDF–HFP films reaches 3.12 V, which is much higher than those poled by a lower electric field (70 MV m−1: 1.40 V; 90 MV m−1: 2.29 V). This result shows that the effect of poling on the generated output voltage is decisive. By adding 0.1 wt% Ni nanoparticles, it increases to 3.84 V, 23% higher than that of the pure PVDF–HFP films. To further understand the enhancement mechanism, the effects of Ni nanoparticles on initial crystallization, uniaxial stretching, and high electric field poling are investigated by X-ray diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry.

1984 ◽  
Vol 57 (1) ◽  
pp. 139-149 ◽  
Author(s):  
Ken'ichi Nakamura ◽  
Yoshikichi Teramoto ◽  
Naohiro Murayama

2015 ◽  
Vol 08 (03) ◽  
pp. 1540006 ◽  
Author(s):  
Bin Hu ◽  
Ning Hu ◽  
Liangke Wu ◽  
Hao Cui ◽  
Ji Ying

Two kinds of carbon black (CB) (i.e., CB#300 and CB#3350) were added into poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP), respectively, to improve its piezoelectricity. The results revealed that when 0.5 wt.% CB was added, the best performance of the PVDF-HFP/CB composite films was obtained. The calibrated open circuit voltage and the density of harvested power of 0.5 wt.% CB#3350 contained composite films were 204%, and 464% (AC) and 561% (DC) of those of neat PVDF-HFP films. Similarly, for 0.5 wt.% CB#300 contained films, they were 211%, and 475% (AC) and 624% (DC), respectively. The enhancement mechanisms of piezoelectricity were clarified by the observation of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and scanning electron microscope (SEM). We found that the added CBs act as nucleate agents to promote the formation of elongated, oriented and fibrillar β-phase crystals during the fabrication process, which increase the piezoelectricity. Overdosed CBs lead to a lower crystallinity degree, resulting in the lower piezoelectricity. Compared with CB#3350, CB#300 performs slightly better, which may be ascribed to its higher specific surface area.


1991 ◽  
Vol 202 (2) ◽  
pp. 213-220 ◽  
Author(s):  
Akiyoshi Takeno ◽  
Norimasa Okui ◽  
Tetsuji Kitoh ◽  
Michiharu Muraoka ◽  
Susumu Umemoto ◽  
...  

1998 ◽  
Vol 15 (1) ◽  
pp. 318 ◽  
Author(s):  
Robert Blum ◽  
Martin Sprave ◽  
Jurgen Sablotny ◽  
Manfred Eich

Author(s):  
Saurav Arora

Until few years, the so-called implausible science, homeopathy, was on the verge of being rejected on conventional physicochemical grounds. The mere selection of ultrahigh dilutions (UHD) (homeopathic potencies) for experimentation by mainstream scientists seemed impossible, but the curiosity to explore the science behind homeopathy kept igniting intellectual alma mater who subjected homeopathy to laboratories and test tubes, to know beyond its clinical application. Still, there exist a huge gap and a challenge to convince a conventional scientist to go beyond his domains and look for something which is apparently invisible (beyond Avogadro). But gradually we are overcoming this dogma and exploring the finer aspects and applications of UHDs. Much research has been undertaken, at least, to protect the identity of UHDs, and we are now verge of proving the plausibility of homeopathy from every aspect. This issue of International Journal of High Dilution Research features two interesting articles on nature of UHDs and their unconventional application. The first article by NC Sukul et al aimed to decipher the nature of the water structure of UHDs of two commonly used homeopathic drugs Natrum muriaticum and Sulphur by Laser Raman Spectroscopy. This work is in the series undertaken by the group, who earlier experimented using Nuclear Magnetic Resonance; Electronic, Vibrational and Raman spectroscopy to shown differences in UHDs of various drugs. The present experiment could differentiate the intensities (potencies) of Nat-m and Sulph when compared to their controls, on the basis of hydrogen bond strength and free OH groups. The second article by Nandy et al proposes a new dimension to the application of UHD. In an interesting manner, the author used UHDs of Ferrum metallicum and Zincum oxidatum to improve the electrical properties of the electroactive Poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP). The PVDF-HFP composite films were synthesized in their usual way, but an incorporation of Ferrum and Zinc-o could make the film as homeo-PVDF-composite. This enhancement of the electrical properties and are possibly due to the presence of nanoparticle, as hypothesized by the group. The nature and application of UHDs are promising but challenging areas, which can only be validated through extensive research and validation. The realm of UHDs is expanding, and the day is not far when plausibility of homeopathy would be proved from every aspect, but at the same time we should also keep the momentum of research at pace in clinical research too!


Sign in / Sign up

Export Citation Format

Share Document