Effect of plasticizers on the properties of sugar palm nanocellulose/cinnamon essential oil reinforced starch bionanocomposite films

This work examines the effects of plasticizer type and concentration on mechanical, physical, and antibacterial characteristics of sugar palm nanocellulose/sugar palm starch (SPS)/cinnamon essential oil bionanocomposite films. In this research, the preparation of SPS films were conducted using glycerol (G), sorbitol (S), and their blend (GS) as plasticizers at ratios of 1.5, 3.0, and 4.5 wt%. The bionanocomposite films were developed by the solution casting method. Plasticizer Plasticizers were added to the SPS film-forming solutions to help overcome the fragile and brittle nature of the unplasticized SPS films. Increasing plasticizer contents resulted in an increase in film thickness and moisture contents. On the contrary, the increase in plasticizer concentrations resulted in the decrease of the densities of the plasticized films. The increase in the plasticizer content from 1.5 to 4.5% revealed less influence towards the moisture content of S-plasticised films. For glycerol and glycerol-sorbitol plasticized (G and GS) films, higher moisture content was observed compared to S-plasticised films. Various plasticizer types did not significantly modify the antibacterial activity of bionanocomposite films. The findings of this study showed significant improvement in the properties of bionanocomposite films with different types and concentrations of plasticizers and their potential for food packaging applications was enhanced.

Insights on magnetic spinel ferrites for targeted drug delivery and hyperthermia applications

Magnetic spinel ferrite nanoparticles (SFNPs) attract high scientific attention from researchers due to their broad area for biomedicine applications, comprising cancer magnetic hyperthermia and targeted drug delivery. Uniquely, its excellent performance, namely, tuning size and surface morphology, excellent magnetism, extraordinary magnetically heat induction, promising biocompatibility, and specific targeting capacity, is essential for their effective utilization in clinical diagnosis and therapeutics of diseases. This review emphasizes the anticancer properties of nanoparticles of spinel ferrites with extra focus on the most recent literature. A critical review is provided on the latest applications of SFNPs in cancer therapy. Based on the results obtained from this review, SFNPs have the indefinite ability in cancer therapy through two mechanisms: (1) hyperthermia, where SFNPs, used as a hyperthermia mediator, elevated the tumor cells heat post-exposure to an external magnetic field and radiosensitizer during cancer radiotherapy; and (2) targeted drug delivery of cytotoxic drugs in tumor treatment. SFNPs induced apoptosis and cell death of cancer cells and prevented cancer cell proliferation.

Enhancement of the mechanical properties of HDPE mineral nanocomposites by filler particles modulation of the matrix plastic/elastic behavior

Two different nanosized mineral fillers (nano calcium carbonate and nanoclay) were used in the high density poly(ethylene) (HDPE) composites pilot plant production. Structural and mechanical properties of the prepared composites were examined in this study. The homogenous filler distribution was confirmed in the tested samples by scanning electron microscopy, transmission electron microscopy, and energy dispersive spectroscopy analyses. The fillers’ fortifying effect on polymer composites’ mechanical performance was confirmed as indicated by the increased elastic modulus and indentation modulus. Additionally, the possible modulation of the plastic-elastic mechanical behavior was confirmed by the type of the filler as well as its concentration used in the final composites testing articles.

Optimization of nano coating to reduce the thermal deformation of ball screws

To reduce the thermal deformation of ball screws, the process of nano coating preparation for coating on ball screws to reduce temperature rise and thereby thermal deformation was discussed in this article. Simultaneously, the cooling mechanism was presented. The thermal channels and the relatively even distribution of graphene in the nano coating were observed in scanning electron microscopic images. In terms of the preparation of nano coating, optimization design was carried out to obtain the optimized material ratio and nozzle flow through orthogonal experiment. The influence of design parameters of nano coating on reducing thermal deformation was also discussed. The experimental results show that the maximum temperature rise, thermal deformation, and time to reach thermal balance decreased by 12.5, 69.1, and 46.3%, respectively. The effectiveness of nano coating in reducing thermal deformation was validated experimentally.

MHD dissipative Casson nanofluid liquid film flow due to an unsteady stretching sheet with radiation influence and slip velocity phenomenon

The problem of non-Newtonian Casson thin film flow of an electrically conducting fluid on a horizontal elastic sheet was studied using suitable dimensionless transformations on equations representing the problem. The thin film flow and heat mechanism coupled with mass transfer characteristics are basically governed by the slip velocity, magnetic field, and the dissipation phenomenon. The present numerical analysis by the shooting method was carried out to study the detailed, fully developed heat and mass transfer techniques in the laminar thin film layer by solving the competent controlling equations with eight dominant parameters for the thin liquid film. Additionally, the predicted drag force via skin-friction coefficient and Nusselt and Sherwood numbers were correlated. In view of the present study, a smaller magnetic parameter or a smaller slip velocity parameter exerts very good influence on the development of the liquid film thickness for the non-Newtonian Casson model. Furthermore, a boost in the parameter of unsteadiness causes an increase in both velocity distribution and concentration distribution in thin film layer while an increase in the same parameter causes a reduction in the film thickness. Likewise, the present results are observed to be in an excellent agreement with those offered previously by other authors. Finally, some of the physical parameters in this study, which can serve as improvement factors for heat mass transfer and thermophysical characteristics, make nanofluids premium candidates for important future engineering applications.

Structural material with designed thermal twist for a simple actuation

Materials with desired thermal deformation are very important for various engineering applications. Here, a material with the combination of chiral structure and TiNi shape memory alloy (SMA) sheets that performs a twist during heating is proposed. The thermo-mechanical properties of these materials are experimentally investigated. Inspired by this, a car-like material performing translational and rotational motion is designed, which illustrates the potential applications for the next-generation soft robotic devices. Based on this method, one can design remotely manipulated artificial muscles, nanorobots, revolute pairs, and thermal sensors or actuators in a noncontact fashion.

State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials

Functionally graded porous (FGP) nanocomposites are the most promising materials among the manufacturing and materials sector due to their adjustable physical, mechanical, and operational properties for distinctive engineering applications for maximized efficiency. Therefore, investigating the underlying physical and materialistic phenomena of such materials is vital. This research was conducted to analyze the preparation, fabrication, applications, and elastic properties of functionally graded materials (FGMs). The research investigated for both porous and nonporous synthesis, preparation, and manufacturing methods for ceramics, metallic, and polymeric nanocomposites in the first section, which is followed by deep research of the development of elastic properties of the above-mentioned materials. Main nano-reinforcing agents used in FGMs to improve elastic properties were found to be graphene platelets, carbon nanotubes, and carbon nanofibers. In addition, research studied the impact of nano-reinforcing agent on the elastic properties of the FGMs. Shape, size, composition, and distribution of nano-reinforcing agents were analyzed and classified. Furthermore, the research concentrated on modeling of FGP nanocomposites. Extensive mathematical, numerical, and computational modeling were analyzed and classified for different engineering analysis types including buckling, thermal, vibrational, thermoelasticity, static, and dynamic bending. Finally, manufacturing and design methods regarding different materials were summarized. The most common results found in this study are that the addition of reinforcement units to any type of porous and nonporous nanocomposites significantly increases materialistic and material properties. To extend, compressive and tensile stresses, buckling, vibrational, elastic, acoustical, energy absorption, and stress distribution endurance are considerably enhanced when reinforcing is applied to porous and nonporous nanocomposite assemblies. Ultimately, the review concluded that the parameters such as shape, size, composition, and distribution of the reinforcing units are vital in terms of determining the final mechanical and materialistic properties of nanocomposites.

Preparation of efficient piezoelectric PVDF–HFP/Ni composite films by high electric field poling

Poly(vinylidene fluoride) (PVDF) and its copolymers have been widely studied due to their excellent piezoelectricity and ferroelectricity. In this study, composite films are prepared by adding Ni nanoparticles (0.00–0.3 wt%) into poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF–HFP) matrix by solution casting, uniaxial stretching, and high electric field poling. It is found that when the maximum electric field E max for poling is 130 MV m−1, the calibrated open circuit voltage of the pure PVDF–HFP films reaches 3.12 V, which is much higher than those poled by a lower electric field (70 MV m−1: 1.40 V; 90 MV m−1: 2.29 V). This result shows that the effect of poling on the generated output voltage is decisive. By adding 0.1 wt% Ni nanoparticles, it increases to 3.84 V, 23% higher than that of the pure PVDF–HFP films. To further understand the enhancement mechanism, the effects of Ni nanoparticles on initial crystallization, uniaxial stretching, and high electric field poling are investigated by X-ray diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry.

Investigative properties of CeO2 doped with niobium: A combined characterization and DFT studies

Catalytic capacity of ceria mainly stems from a facile switch in the Ce oxidation states from +4 to +4 − x. While various experimental and computational studies pinpoint the reduction chemistry of Ce atom through the creation of oxygen vacancies, the analogous process when ceria surface is decorated with cations remains poorly understood. Where such results are available, a synergy between experimental and first principle calculation is scarce. Niobium materials are evolving and their use in catalysis is being widely investigated due to their high surface acidity and thermal and chemical stability. This study aims to report structural and electronic properties of various configurations of mixed Ce–Nb oxides and elaborates on factors that underpin potential catalytic improvements. Evaluations of the samples through X-ray diffraction (XRD), Fourier transform infrared (FTIR), N2-adsorption–desorption, scanning electron microscope (SEM), energy dispersive spectroscope (EDS), and thermogravimetric (TGA) analyses are examined and discussed. First principles density functional theory (DFT) calculations provide structural features of the Ce–Nb solutions at low concentration of Nb via computing atomic charge distribution. Contraction in the lattice parameter after Nb doping was confirmed with both XRD and DFT results. SEM analysis reveals particle growth at the loading of 50 wt%. FTIR results established the Ce–Nb–O bond at 1,100 cm−1 and the TGA analysis confirms the thermal stability of Nb-doped ceria. Tetrahedral O atoms demonstrate an increase in electronegativity and this in turn facilitates catalytic propensity of the material because the O atoms will exhibit higher affinity for adsorbed reactants. Cerium oxide (CeO2) after Nb doping displays a noticeable band gap narrowing, confirming the possible improvement in the catalytic behavior. The 4d states of the Niobium pentoxide (Nb2O5) is found to fill up the 4f states of CeO2 around the Fermi energy level promoting electrons excitation in the CeO2. Reported electronic, structural, and thermal characteristics herein indicate promising catalytic applications of niobium-promoted ceria.

Development of (−)-epigallocatechin-3-gallate-loaded folate receptor-targeted nanoparticles for prostate cancer treatment

In continuation of our previous studies, we developed polymeric epigallocatechin 3-gallate (EGCG)-loaded nanoparticles (NPs) coupled with folic acid (FA), able to dually bind the human folate receptor alpha (FOLR1), and prostate-specific membrane antigen (PSMA+) in prostate cancer (PCa) model. After a preliminary computational molecular recognition of NP′ ligand binding on the FOLR1 active site, we synthesized the biocompatible block-copolymer PLGA–PEG–FA to prepare EGCG-targeted NPs (EGCG-T-NPs). The obtained NPs were characterized by various analytical techniques, and anticancer efficacy was determined by different sets of experiments in a 3D culture of PCa using PC3 and 22Rv1 cell lines. Results showed a significant reduction in spheroid size by EGCG-T-NPs, especially in PSMA+ (22Rv1) cells. The targeted NPs significantly enhanced the antiproliferative activity of EGCG against PCa cell lines, especially toward the PSMA+ cells, known to have higher FOLR1 expression. We did not observe any changes in the reactive oxygen species formation in both studied cell lines. However, significant changes in mitochondrial depolarization (15%) and polarization (18%) were recorded in response to EGCG-T-NP compared to control in 22Rv1. Similarly, EGCG-T-NP treatment also showed an increase in the number of dead apoptotic cells in 22Rv1 spheroids. Collectively, the obtained results support our hypothesis about the role of these targeted nanoprototypes in the increasing cellular uptake of EGCG payload into PCa cells, thus enhancing its antitumor efficacy.