Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

2021 ◽  
Author(s):  
Keyword(s):  
Author(s):  
Tran Minh Hieu ◽  
Nguyen Duong Ngoc Mai Chi

This study applied SERVQUAL scale of Parasuraman et al to measure factors affecting customer satisfaction on service quality at Vietnam Technological and Commercial Joint Stock Bank - An Giang Branch (Techcombank An Giang). The study was conducted to survey 207 customers who have been using the service at Techcombank An Giang. The survey results were analyzed by the Cronbach's Alpha reliability test method, then used Exploratory factor analysis (EFA) to verify and evaluate the scale of service quality. The results of the regression analysis show that customer's satisfaction about service quality at Techcombank An Giang includes four factors: The factor with the highest level is the Empathy with Beta = 0.253, the second of factor is the Responsibility with Beta = 0.248, ranked third in the influence level is the Tangible with Beta = 0.235, and the lowest impact level is the Reliability with Beta = 0.144. The research also uses statistical methods to describe and test the differences of demographic factors with customer's satisfactionon service quality.The analysis results show that there is no difference between customer's satisfaction on service quality and factors such as gender, age, income, number of transaction banks, regular transaction banks, and time to use the service at Techcombank An Giang. Through the research results, the author would like to propose some ideas to improve the quality of services, thereby attracting new customers and importantly, keeping traditional customers because the development orientation of Techcombank is to take care of old customers to cross sell other products of the bank. The Stud results offer a basis for the branch to identify the factors influencing customer satisfaction on their service quality, thereby having an appropriate strategy to improve customer satisfaction.


2013 ◽  
Vol 483 ◽  
pp. 166-169
Author(s):  
Jia Lun Qiu ◽  
Rui Rong Zhao ◽  
Ying Jie Wang ◽  
Wei Zhao ◽  
Jing Cai Li

The V / H inspection method is analyzed, including its basic definition, purpose and V / H inspection technical process of Gleason Company. In order to improve the quality of the contact region, Gleasons V / H test method is conducted for V/H inspection of spiral bevel gear before heat treatment, and analysis of experimental data is given.


2017 ◽  
Vol 726 ◽  
pp. 414-418
Author(s):  
Bo Fu ◽  
Hui Wang ◽  
Zhu Feng Shao

The optical quartz glass is widely applied in optical system , photo communications,inertial navigation,etc.It must have high optical homogeneity. Optical homogeneity of the optical quartz glass directly affects the wavefront quality of the optical transmission system, and changes the wavefront aberration of the system. How to accurately determine the optical homogeneity of the quartz glass is especially important. Currently,the method of test for optical homogeneity mainly used by interference principle. This paper analyzes various existing interference measurement method and test equipment. Summarized the advantages and disadvantages of various test methods,using range and measurement accuracy.


MTZ worldwide ◽  
2013 ◽  
Vol 74 (11) ◽  
pp. 54-61
Author(s):  
Karl Huber ◽  
Johann Hauber

2020 ◽  
pp. 096452842094604
Author(s):  
O Sang Kwon ◽  
Seong Jin Cho ◽  
Kwang-Ho Choi ◽  
Suk-Yun Kang ◽  
Suyeon Seo ◽  
...  

Background: Moxibustion treatment involves a combination of thermal and chemical stimulation applied by the combustion of moxa wool. The quality of moxa wool is considered to be an important factor in moxibustion treatment traditionally and clinically. However, despite its importance, quantitative and objective methods for determining moxa wool quality are lacking. Methods: Moxa wool and commercial indirect moxibustion (CIM) device specimens were randomly collected, dried and strained through sieves of various sizes for 10 h. After sieving, the residues remaining on each sieve were collected. The collected samples were weighed and microscopically observed. Results: In this study, we observed that fibres mainly remained on sieves sized 425 μm, and particles were smaller than 300 μm. The residues between 425 and 300 μm varied between the products. In addition, moxa wool for direct moxibustion (DMW) exhibited significantly more fibres than moxa wool for indirect moxibustion (IMW). Most of the CIM devices using moxa wool had a quality similar to IMW, except for one CIM brand using moxa wool that contained three times more waste particles than IMW. Conclusion: Based on the results of this study, we conclude that the sieving method is useful for testing the quality of moxa wool even after the CIM manufacturing process. The sieve sizes of 425 and 300 μm could be used as a yardstick to determine the quality of moxa wool. Although this approach requires larger scale validation against existing standard methodologies, we believe it has great potential to be used to improve and safeguard the quality of moxa wool contained in commercial moxibustion devices.


Sign in / Sign up

Export Citation Format

Share Document