scholarly journals Tomographic Reconstruction Algorithm for an Annular Cross Section of Toroidal Plasmas by use of Modified Fourier-Bessel Expansions

1995 ◽  
Vol 115 (1) ◽  
pp. 37-43
Author(s):  
Ayumu Morita ◽  
Yasushi Ono ◽  
Makoto Katsurai
2021 ◽  
Vol 11 (14) ◽  
pp. 6460
Author(s):  
Fabio Di Martino ◽  
Patrizio Barca ◽  
Eleonora Bortoli ◽  
Alessia Giuliano ◽  
Duccio Volterrani

Quantitative analyses in nuclear medicine are increasingly used, both for diagnostic and therapeutic purposes. The Partial Volume Effect (PVE) is the most important factor of loss of quantification in Nuclear Medicine, especially for evaluation in Region of Interest (ROI) smaller than the Full Width at Half Maximum (FWHM) of the PSF. The aim of this work is to present a new approach for the correction of PVE, using a post-reconstruction process starting from a mathematical expression, which only requires the knowledge of the FWHM of the final PSF of the imaging system used. After the presentation of the theoretical derivation, the experimental evaluation of this method is performed using a PET/CT hybrid system and acquiring the IEC NEMA phantom with six spherical “hot” ROIs (with diameters of 10, 13, 17, 22, 28, and 37 mm) and a homogeneous “colder” background. In order to evaluate the recovery of quantitative data, the effect of statistical noise (different acquisition times), tomographic reconstruction algorithm with and without time-of-flight (TOF) and different signal-to-background activity concentration ratio (3:1 and 10:1) was studied. The application of the corrective method allows recovering the loss of quantification due to PVE for all sizes of spheres acquired, with a final accuracy less than 17%, for lesion dimensions larger than two FWHM and for acquisition times equal to or greater than two minutes.


2021 ◽  
pp. 54-62
Author(s):  
В.П. Карих ◽  
Б.В. Певченко ◽  
А.В. Курбатов ◽  
А.А. Охотников ◽  
А.А. Скоков

The article investigates the possibilities of using a 3D tomograph with a limited-sizes registering screen for detecting arbitrarily oriented crack-like defects in large industrial objects. Circular and spiral scanning schemes are considered, the principal possibility of detecting defects in the case of two-pass spiral scanning and a registering screen covering half of the view field of the test object cross-section is shown. The performance of the 3D reconstruction algorithm for the selected scanning method has been demonstrated.


2019 ◽  
Author(s):  
Tomás Antonio Valencia Pérez ◽  
Javier Miguel Hernández López ◽  
Eduardo Moreno Barbosa ◽  
Mario Iván Martínez Hernández ◽  
Guillermo Tejeda Muñoz ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document