scholarly journals OPTIMIZATION OF SHOOT INITIATION USING RESPONSE SURFACE METHODOLOGY AND CALLUS MEDIA STANDARDIZATION FOR MICROPROPAGATION OF CENTELLA ASIATICA

RSC Advances ◽  
2021 ◽  
Vol 11 (15) ◽  
pp. 8741-8750
Author(s):  
Suppalak Phaisan ◽  
Fonthip Makkliang ◽  
Waraporn Putalun ◽  
Seiichi Sakamoto ◽  
Gorawit Yusakul

This study outlines a green process for Centella asiatica (L.) Urb. (CA) extraction.


2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
R. J. Mohd Salim ◽  
M. I. Adenan ◽  
A. Amid ◽  
M. H. Jauri ◽  
A. S. Sued

The purpose of the study is to evaluate the relationship between the extraction parameters and the metal chelating activity of Centella asiatica (CA) and Erythroxylum cuneatum (EC). The response surface methodology was used to optimize the extraction parameters of methanolic extract of CA and EC with respect to the metal chelating activity. For CA, Run 17 gave optimum chelating activity with IC50 = 0.93 mg/mL at an extraction temperature of 25°C, speed of agitation at 200 rpm, ratio of plant material to solvent at 1 g : 45 mL and extraction time at 1.5 hour. As for EC, Run 13 with 60°C, 200 rpm, 1 g : 35 mL and 1 hour had metal chelating activity at IC50 = 0.3817 mg/mL. Both optimized extracts were further partitioned using a solvent system to evaluate the fraction responsible for the chelating activity of the plants. The hexane fraction of CA showed potential activity with chelating activity at IC50 = 0.090 and the ethyl acetate fraction of EC had IC50 = 0.120 mg/mL. The study showed that the response surface methodology helped to reduce the extraction time, temperature and agitation and subsequently improve the chelating activity of the plants in comparison to the conventional method.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wachiraporn Thong-on ◽  
Thanika Pathomwichaiwat ◽  
Suthida Boonsith ◽  
Wanida Koo-amornpattana ◽  
Sompop Prathanturarug

AbstractCentella asiatica (L.) Urban extracts are widely used as food, drugs and cosmetics, and the main active compounds are glycosides (madecassoside and asiaticoside) and aglycones (madecassic acid and asiatic acid). Green extraction is an interesting concept that can produce safe and high-quality extracts that use less solvent, time and energy with the environmental friendly. This study investigated the optimum conditions for extracting a triterpenoid glycoside-enriched C. asiatica extract using microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). Central composite design and response surface methodology (RSM) were used for the experimental design and data analysis. Four-month-old C. asiatica tetraploid plants were selected as the elite raw material containing high amount of triterpenoid glycosides for the extraction experiments, and the triterpenoid content was determined by a validated HPLC method. The results demonstrated that the RSM models and equations were reliable and could predict the optimal conditions to enhance C. asiatica extract yield, glycoside and aglycone amounts. The percent of ethanol was the major factor that had a significant effect on C. asiatica yield and glycoside and aglycone content during MAE and UAE. The maximum triterpenoids content in extract; 7.332 ± 0.386% w/w madecassoside and 4.560 ± 0.153% w/w asiaticoside 0.357 ± 0.013% w/w madecassic acid and 0.209 ± 0.025% w/w asiatic acid were obtained by MAE with 80% ethanol at 100 watts for 7.5 min, whereas the optimal conditions for highest total triterpenoids extraction from dry plant was UAE with 80% ethanol, temperature 48 °C, 50 min enhanced 2.262 ± 0.046% w/w madecassoside, 1.325 ± 0.062% w/w asiaticoside, 0.082 ± 0.009% w/w madecassic acid and 0.052 ± 0.007% w/w asiatic acid as secondary outcome. Moreover, it was found that MAE and UAE consumed energy 59 and 54%, respectively, lower than that of the conventional method, maceration, in term of kilowatt-hour per gram of total triterpenoids. These optimized green conditions could be recommended for C. asiatica extraction for triterpenoid glycoside-enriched extracts production for the pharmaceutical or cosmeceutical industries and triterpenoids quantitative analysis in raw materials.


Sign in / Sign up

Export Citation Format

Share Document