This study synthesized magnetic nanoparticles (Fe3O4) immobilized on activated carbon (AC) and used them as an effective adsorbent for Cu(II) removal from aqueous solution. The effect of three parameters, including the concentration of Cu(II), dosage of Fe3O4/AC magnetic nanocomposite and pH on the removal of Cu(II) using Fe3O4/AC nanocomposite were studied. In order to examine and describe the optimum condition for each of the mentioned parameters, Taguchi's optimization method was used in a batch system and L9 orthogonal array was used for the experimental design. The removal percentage (R%) of Cu(II) and uptake capacity (q) were transformed into an accurate signal-to-noise ratio (S/N) for a ‘larger-the-better’ response. Taguchi results, which were analyzed based on choosing the best run by examining the S/N, were statistically tested using analysis of variance; the tests showed that all the parameters’ main effects were significant within a 95% confidence level. The best conditions for removal of Cu(II) were determined at pH of 7, nanocomposite dosage of 0.1 gL−1 and initial Cu(II) concentration of 20 mg L−1 at constant temperature of 25 °C. Generally, the results showed that the simple Taguchi's method is suitable to optimize the Cu(II) removal experiments.
Investigation on Formation Mechanism of Magnetic Nanoparticles-coated on Polystyrene Microspheres in Aqueous Solution of Anhydrous Ethylenediamine and Hexamethylene Tetramine
