scholarly journals The Incidence of Dislocation (Utilizing a Neck Sparing Stem) in Community Based Practices with the Posterior Approach

2015 ◽  
Vol 5 (2) ◽  
Author(s):  
Edward J. McPherson ◽  
Bradley K. Vaughn ◽  
Louis Keppler ◽  
Declan Brazil ◽  
Timothy McTighe
Keyword(s):  
Risk Factors ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Surgical Approach ◽  
Posterior Approach ◽  
Stem Length ◽  
Joint Mechanics ◽  
Total Hip ◽  
Patient Profile ◽  
Acetabular Components

Purpose. To evaluate early and mid-term risk factors and dislocation rates in the posterior surgical approach in three separate community private practices using a short curved neck-sparing total hip stem design.Material and Methods.The three senior authors performed 338 short curved neck-sparing stem designs since April 2010 to June 2014.  Various cementless acetabular components were used for all three surgical centers based on preoperative and intraoperative risk factors. All cases were reviewed retrospectively for incidence of dislocation after surgery.Version and inclination of the acetabular component and version of the femoral component were assed intra-operatively prior to final implantation. Various risk factors were reviewed including surgical approach, cup position, combined cup and stem positioning, and femoral head size.There have been significant papers in the past ten years that have recommended large head diameters to reduce the chances of head/neck mechanical impingement. Since the neck-sparing designs have a potentially increased risk of mechanical impingement head diameters were restricted to 32 mm or larger. In the smaller patient profile if a 32 mm head size could not be reached a dual-mobility style implant was chosen or stem choice was changed to a conventional style design.Results.Historically the posterior approach has had higher reports of dislocations as compared to direct anterior, anterolateral or straight lateral approach in conventional cemented and cementless implant designs. Older neck-sparing designs of conventional stem length by Freeman, Townley and Whiteside have not reported any increased dislocation problems but these stems have been associated with modified acetabular component designs, including the short curved neck sparing design of Pipino back in the 1980s.Incidence of dislocation in our series utilizing a short curved neck-sparing stem with more traditional hemispherical cementless acetabular components was 3 or 0.88%.Conclusion.Neck sparing stem designs do save significantly more bone and require less soft tissue dissection as compared to conventional cementless stem designs. Mechanical risk factors are increased with the use of short curved neck-sparing stem designs. Careful pre-operative and intra-operative evaluation does reduce the risk factors resulting in low and in some cases lower than previous published rates with conventional style stems.Short curved neck sparing stems do provide safe and reliable reproduction of the joint mechanics in routine primary total hip arthroplasty in both short and mid term results.Key Words: hip, arthroplasty, posterior approach, dislocation, neck sparing, and risk factors

Biomechanical analysis of transverse acetabular fracture fixation in the elderly via the posterior versus the anterior approach with and without a total hip arthroplasty

2020 ◽  
Vol 234 (9) ◽  
pp. 966-974
Author(s):  
Joel Moktar ◽  
Alan Machin ◽  
Habiba Bougherara ◽  
Emil H Schemitsch ◽  
Radovan Zdero
Keyword(s):  
Total Hip Arthroplasty ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Acetabular Fracture ◽  
Anterior Approach ◽  
Posterior Approach ◽  
Failure Load ◽  
The Elderly ◽  
Clinical Failure ◽  
Total Hip

This study provides the first biomechanical comparison of the fixation constructs that can be created to treat transverse acetabular fractures when using the “gold-standard” posterior versus the anterior approach with and without a total hip arthroplasty in the elderly. Synthetic hemipelvises partially simulating osteoporosis (n = 24) were osteotomized to create a transverse acetabular fracture and then repaired using plates/screws, lag screws, and total hip arthroplasty acetabular components in one of four ways: posterior approach (n = 6), posterior approach plus a total hip arthroplasty acetabular component (n = 6), anterior approach (n = 6), and anterior approach plus a total hip arthroplasty acetabular component (n = 6). All specimens were biomechanically tested. No differences existed between groups for stiffness (range, 324.6–387.3 N/mm, p = 0.629), clinical failure load at 5 mm of femoral head displacement (range, 1630.1–2203.9 N, p = 0.072), or interfragmentary gapping (range, 0.67–1.33 mm, p = 0.359). Adding a total hip arthroplasty acetabular component increased ultimate mechanical failure load for posterior (2904.4 vs. 3652.3 N, p = 0.005) and anterior (3204.9 vs. 4396.0 N, p = 0.000) approaches. Adding a total hip arthroplasty acetabular component also substantially reduced interfragmentary sliding for posterior (3.08 vs. 0.50 mm, p = 0.002) and anterior (2.17 vs. 0.29 mm, p = 0.024) approaches. Consequently, the anterior approach with a total hip arthroplasty may provide the best biomechanical stability for elderly patients, since this fixation group had the highest mechanical failure load and least interfragmentary sliding, while providing equivalent stiffness, clinical failure load, and gapping compared to other surgical options.

Radiolucent lines do not affect the longevity of highly cross-linked polyethylene cemented components in total hip arthroplasty

2021 ◽  
Vol 103-B (10) ◽  
pp. 1604-1610
Author(s):  
Yusuke Takaoka ◽  
Koji Goto ◽  
Jiro Tamura ◽  
Yaichiro Okuzu ◽  
Toshiyuki Kawai ◽  
...  
Keyword(s):  
Femoral Head ◽  
Total Hip Arthroplasty ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Long Term Outcome ◽  
Total Hip ◽  
Radiolucent Lines ◽  
Kaplan Meier ◽  
Acetabular Components

Aims We aimed to evaluate the long-term outcome of highly cross-linked polyethylene (HXLPE) cemented acetabular components and assess whether any radiolucent lines (RLLs) which arose were progressive. Methods We retrospectively reviewed 170 patients who underwent 187 total hip arthroplasties at two hospitals with a minimum follow-up of ten years. All interventions were performed using the same combination of HXLPE cemented acetabular components with femoral stems made of titanium alloy. Kaplan-Meier survival analysis was performed for the primary endpoint of acetabular component revision surgery for any reason and secondary endpoint of the appearance of RLLs. RLLs that had appeared once were observed over time. We statistically assessed potential relationships between RLLs and a number of factors, including the technique of femoral head autografting and the Japanese Orthopaedic Association score. Results The mean follow-up period was 13.0 years (10.0 to 16.3). Femoral head autografting was performed on 135 hips (72.2%). One acetabular component was retrieved because of deep infection. No revision was performed for the aseptic acetabular loosening. The Kaplan-Meier survival curve for the primary and secondary endpoints were 98.2% (95% confidence interval (CI) 88.6% to 99.8%) and 79.3% (95% CI 72.8% to 84.6%), respectively. RLLs were detected in 38 hips (21.2%), at a mean of 1.7 years (1 month to 6 years) postoperatively. None of the RLLs were progressive, and the presence of RLLs did not show a significant association with the survival and clinical score. RLLs were more frequently observed in hips without femoral head autografts than in those with autografts. Conclusion The use of HXLPE cemented acetabular components in total hip arthroplasty demonstrated excellent clinical outcomes after ten years, and no RLLs were progressive, and their presence did not affect the outcome. Femoral head autografting did not negatively impact the acetabular component survival or the appearance of RLLs. Cite this article: Bone Joint J 2021;103-B(10):1604–1610.

scholarly journals Salvaging Unstable or Recurrent Dislocating Total Hip Arthroplasty with the Constrained Acetabular Component

2002 ◽  
Vol 10 (2) ◽  
pp. 165-169 ◽  
Author(s):  
DA Stanton ◽  
WJ Bruce ◽  
JA Goldberg ◽  
W Walsh
Keyword(s):  
Total Hip Arthroplasty ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Recurrent Dislocation ◽  
Total Hip ◽  
Hip Replacements ◽  
The Mean ◽  
Acetabular Components ◽  
Constrained Acetabular Component

Purpose. To review cases of implantation of constraining acetabular components for unstable or recurrent dislocating total hip arthroplasty at the Department of Orthopaedics, Concord Hospital, Sydney. Methods. A retrospective analysis was performed on prospectively collected data of 13 consecutively enrolled patients. Results. From 1989 to 2000, 13 constraining acetabular components were implanted into 13 patients as a revision procedure. The surgical approach for the implantation of the constrained liner was posterolateral in 11 cases; a modified Hardinge approach was applied in 2 cases. The mean clinical follow-up duration was 43 months (range, 14–121 months) and the mean age at the time of surgery was 73 years (range, 52–84 years). No patients were lost to follow-up. Indications for using the constrained acetabular component were recurrent dislocation in revision hip replacements (n=8), and intra-operative instability (n=5). There were no episodes of dislocation of the constrained arthroplasty. In 7 cases, the constrained component was implanted into a previously well-fixed shell. Conclusion. We recommend the judicious use of the constrained component in cases of hip instability during or after total hip arthroplasty when other methods are not successful.

scholarly journals Second-generation uncemented total hip arthroplasty: a minimum 20-year follow-up

2021 ◽  
Vol 2 (1) ◽  
pp. 33-39
Author(s):  
Jeffrey R. McLaughlin ◽  
Kyla R. Lee ◽  
Mary Ann Johnson
Keyword(s):  
Total Hip Arthroplasty ◽  
Aseptic Loosening ◽  
Femoral Component ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Second Generation ◽  
Total Hip ◽  
Uncemented Total Hip Arthroplasty ◽  
Acetabular Components

Aims We present the clinical and radiological results at a minimum follow-up of 20 years using a second-generation uncemented total hip arthroplasty (THA). These results are compared to our previously published results using a first-generation hip arthroplasty followed for 20 years. Methods A total of 62 uncemented THAs in 60 patients were performed between 1993 and 1994. The titanium femoral component used in all cases was a Taperloc with a reduced distal stem. The acetabular component was a fully porous coated threaded hemispheric titanium shell (T-Tap ST). The outcome of every femoral and acetabular component with regard to retention or revision was determined for all 62 THAs. Complete clinical follow-up at a minimum of 20 years was obtained on every living patient. Radiological follow-up was obtained on all but one. Results Two femoral components (3.2%) required revision. One stem was revised secondary to a periprosthetic fracture one year postoperatively and one was revised for late sepsis. No femoral component was revised for aseptic loosening. Six acetabular components had required revision, five for aseptic loosening. One additional acetabular component was revised for sepsis. Radiologically, all femoral components remained well fixed. One acetabular was judged loose by radiological criteria. The mean Harris Hip Score improved from 46 points (30 to 67) preoperatively to 89 points (78 to 100) at final follow-up. With revision for aseptic loosening as the endpoint, survival of the acetabular component was 95% (95% confidence interval (CI) 90 to 98) at 25 years. Femoral component survival was 100%. Conclusion The most significant finding of this report was the low prevalence of aseptic loosening and revision of the femoral component at a mean follow-up of 22 years. A second important finding was the survival of over 90% of the hemispheric threaded ring acetabular components. While these shells remain controversial, in this series they performed well. Cite this article: Bone Jt Open 2021;2(1):33–39.

scholarly journals Metallic Modular Taper Junctions in Total Hip Arthroplasty

2015 ◽  
Vol 5 (2) ◽  
Author(s):  
Timothy McTighe ◽  
Declan Brazil ◽  
Louis Keppler ◽  
John Keggi ◽  
Edward McPherson
Keyword(s):  
Risk Factors ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Biological Response ◽  
Corrosive Wear ◽  
Fretting Wear ◽  
Joint Mechanics ◽  
Total Hip ◽  
Particulate Debris ◽  
And Performance

The emergence of modularity in total hip arthroplasty (THA) in the 1980s and 1990s was based on the fact that the benefit of these design features outweighed the risk. The use of metallic modular junctions presents a unique set of advantages and problems for use in THA. The advantages include improvement in fit and fill of the implant to bone, restoration of joint mechanics, reduced complications in revision surgery and reduction of costly inventory. However, the risks or concerns are a little harder to identify and deal with. Certainly corrosion, and fatigue failure are the two most prevalent concerns but now the specifics of fretting wear and corrosive wear increasing particulate debris and the potential biological response is having an impact on the design and potential longevity of the reconstructed hip. Material and designs are facing a shorter life expectancy than what was previously thought, mostly due to an increasing level of physical activity by the patient. Because there are no accurate laboratory test whereby the service life and performance of these implants can be predicted, early controlled clinical evaluations are necessary. Early publication of testing and clinical impressions should be encouraged in an attempt to reduce exposure to potential at risk patients, implants and material. The reduction and possible elimination of risks will require a balancing of all the variables requiring a multidisciplinary endeavor.This paper is designed to review the risk factors, and benefits of modular junctions in total hip arthroplasty (THA). Also some basic engineering principals that can reduce risk factors and improve functionality of modular junctions.

Redefining the Acetabular Component Safe Zone for Posterior Approach Total Hip Arthroplasty

2016 ◽  
Vol 31 (2) ◽  
pp. 506-511 ◽  
Author(s):  
Jonathan R. Danoff ◽  
Jacob T. Bobman ◽  
Gregory Cunn ◽  
Taylor Murtaugh ◽  
Prakash Gorroochurn ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Posterior Approach ◽  
Safe Zone ◽  
Total Hip

Outbreak of Surgical Wound Infections Associated With Total Hip Arthroplasty

1992 ◽  
Vol 13 (9) ◽  
pp. 526-534 ◽  
Author(s):  
Consuelo M. Beck-Sague ◽  
Wang H. Chong ◽  
Connie Roy ◽  
Roger Anderson ◽  
William R Jarvis
Keyword(s):  
Risk Factors ◽  
Total Hip Arthroplasty ◽  
Wound Infection ◽  
Hip Arthroplasty ◽  
Posterior Approach ◽  
Surgical Wound Infection ◽  
Wound Infections ◽  
Surgical Wound ◽  
Total Hip ◽  
Drop Plate

AbstractObjectives:Describe an outbreak of surgical wound infections associated with total hip arthroplasty; identify risk factors for surgical wound infection during the pre-outbreak and outbreak periods.Setting:A 100-bed hospital. From May 1 to September 30, 1988, 7 of 15 patients who underwent total hip arthroplasty developed surgical wound infections from Staphylococcus aureus (5), Enterobacter cloacae (1), b-hemolytic streptococci (1), enterococci (1), coagulase-negative staphylococci (1), and Escherichia coli (1) (attack rate = 46.7%).Design:Retrospective cohort studies comparing surgical wound infection rates by patient-and procedure-related risk factors during the pre-outbreak and outbreak periods were conducted. Drop plate quantitative air culturing was conducted in 10 consecutive total hip artbroplasties in the subsequent 6 months.Results:Rates of surgical wound infection were significantly higher for arthroplasties in which no intraoperative prophylactic antimicrobials were given (44% versus 8%, relative risk [RR] = 5.4, p= .01), or in which the posterior approach (20% versus 3%, RR= 6.7, p = .04) or a specific prosthesis (39% versus 5%, RR=6.3, p = 0.01) was used. The surgical wound infection rate was highest when one circulating nurse, Nurse A, assisted (47% versus 4%, RR= 12.8, p<.001). Logistic regression analysis identified use of the posterior approach (RR= 1.8, p= .04) and Nurse A's participation (RR= 5.0, p <.001) as independent risk factors for surgical wound infection. Interviews of the nursing supervisor indicated that Nurse A had recurrent dermatitis on her bands. During 6 months following Nurse A's reassignment, the rate declined significantly (from 7/15 to 0/10, p=.01). Drop plate culturing yielded 2 to 10 colonies per plate of organisms that did not match outbreak organisms.Conclusions:Outbreaks associated with personnel generally involve only 1 species. In this outbreak, Nurse A (possibly because of her dermatitis), technique, the posterior approach, and/or other undetermined factors were the primary predictors of surgical wound infection.

Influence of Acetabular Component Position in Non-Cemented Total Hip Arthroplasty

1988 ◽  
Vol 29 (6) ◽  
pp. 746-748 ◽  
Author(s):  
A. Wykman ◽  
B. K. S. Sanjay ◽  
V. Söderlund ◽  
I. Goldie
Keyword(s):  
Total Hip Arthroplasty ◽  
Clinical Outcome ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Total Hip ◽  
Hip Replacements ◽  
The Relationship ◽  
Acetabular Components ◽  
Cemented Total Hip Arthroplasty

Radiologic grading of non-cemented acetabular components in HP Garches total hip replacements was used to evaluate the relationship between a lack of supero-lateral cover of the acetabular component and clinical outcome. In 63 hips, three to five years after total hip arthroplasty, we observed that the acetabular component was partially uncovered in 56 per cent of cases. The fact that several components were partially uncovered did not influence the clinical outcome. Although the follow-up time is short the present study indicates that non-cemented HP Garches total hip arthroplasty is a technique which allows for stable fixation of the acetabular component.

scholarly journals Can robotic technology mitigate the learning curve of total hip arthroplasty?

2021 ◽  
Vol 2 (6) ◽  
pp. 365-370
Author(s):  
Nicholas Kolodychuk ◽  
Edwin Su ◽  
Michael M. Alexiades ◽  
Renee Ren ◽  
Connor Ojard ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Acetabular Component ◽  
Hip Arthroplasty ◽  
Anterior Approach ◽  
Posterior Approach ◽  
Demographic Data ◽  
Operating Time ◽  
Robotic Arm ◽  
Leg Length ◽  
Total Hip

Aims Traditionally, acetabular component insertion during total hip arthroplasty (THA) is visually assisted in the posterior approach and fluoroscopically assisted in the anterior approach. The present study examined the accuracy of a new surgeon during anterior (NSA) and posterior (NSP) THA using robotic arm-assisted technology compared to two experienced surgeons using traditional methods. Methods Prospectively collected data was reviewed for 120 patients at two institutions. Data were collected on the first 30 anterior approach and the first 30 posterior approach surgeries performed by a newly graduated arthroplasty surgeon (all using robotic arm-assisted technology) and was compared to standard THA by an experienced anterior (SSA) and posterior surgeon (SSP). Acetabular component inclination, version, and leg length were calculated postoperatively and differences calculated based on postoperative film measurement. Results Demographic data were similar between groups with the exception of BMI being lower in the NSA group (27.98 vs 25.2; p = 0.005). Operating time and total time in operating room (TTOR) was lower in the SSA (p < 0.001) and TTOR was higher in the NSP group (p = 0.014). Planned versus postoperative leg length discrepancy were similar among both anterior and posterior surgeries (p > 0.104). Planned versus postoperative abduction and anteversion were similar among the NSA and SSA (p > 0.425), whereas planned versus postoperative abduction and anteversion were lower in the NSP (p < 0.001). Outliers > 10 mm from planned leg length were present in one case of the SSP and NSP, with none in the anterior groups. There were no outliers > 10° in anterior or posterior for abduction in all surgeons. The SSP had six outliers > 10° in anteversion while the NSP had none (p = 0.004); the SSA had no outliers for anteversion while the NSA had one (p = 0.500). Conclusion Robotic arm-assisted technology allowed a newly trained surgeon to produce similarly accurate results and outcomes as experienced surgeons in anterior and posterior hip arthroplasty. Cite this article: Bone Jt Open 2021;2(6):365–370.

Sign in / Sign up

Export Citation Format

Share Document