scholarly journals Massive Pseudotumor in a 28mm Ceramic-Polyethylene Revision THA: A Case Report

2014 ◽  
Vol 4 (1) ◽  
pp. 11-17 ◽  
Author(s):  
Edward McPherson, M.D., FACS ◽  
Matthew Dipane, BA ◽  
Sherif Sherif, MD

This report reviews the findings of a massive pseudotumor detected pre-operatively in a 13-year-old revision total hip arthroplasty. The case is unique in that the bearing involved was a 28mm zirconia ceramic head on a polyethylene liner. We propose that the pseudotumor arose from ultrafine titanium particles liberated from the proximal porous coating of the femoral stem. We suspect that the osteolysis produced from polyethylene wear exposed the proximal porous coating and, via a process of mechanical abrasion with the surrounding soft tissues, liberated ultrafine titanium particles. We believe the pseudotumor formed because the patient was pre-sensitized to metal debris based upon a pre-operative lymphocyte T-cell proliferation test (LTT). Based upon this unique case, we feel that pseudotumors more likely form when there is a high rate of ultrafine metal particles generated in a pre-sensitized patient. Finally, we introduce what we believe are the main biologic wear responses in THA. Further research is needed to validate this proposed model.Keywords: pseudotumor, ceramic, polyethylene, osteolysis, THA, bearing wear eesponse, titanium debrisLevel of Evidence:  AAOS Therapeutic Study Level IV

2017 ◽  
Vol 21 (05) ◽  
pp. 616-629 ◽  
Author(s):  
Iman Khodarahmi ◽  
Jan Fritz

AbstractRecent metal artifact reduction techniques in magnetic resonance imaging (MRI) have sparked a new aera in visualization of the peri-implant region and assessment of failing orthopaedic hardware. Modes of failure after total hip arthroplasty can be classified into four broad categories: osseous abnormalities, implant instability and dislocation, implant-associated synovitis, and soft tissue abnormalities. Although MRI is complementary to plain radiography and computed tomography to diagnose the first two categories, it is paramount to investigate the complications related to the synovium and soft tissues. We review the most common modes of failure of hip implants and the MRI characteristics of various causes of pain and dysfunction after hip arthroplasty including osseous stress reaction and fracture, implant loosening, implant instability, polyethylene wear–induced synovitis, adverse reaction to metal debris, infection, hematoma, recurrent hemarthrosis, heterotopic ossification, muscle, tendon, and nerve abnormalities, and periprosthetic neoplasms.


2021 ◽  
Vol 9 ◽  
pp. 205031212110147
Author(s):  
Nobuhiko Sumiyoshi ◽  
Kazuhiro Oinuma ◽  
Yoko Miura

Background: Adverse reactions to metal debris are significant complications after metal-on-metal total hip arthroplasty. Recently, late appearances of adverse reactions to metal debris and subsequent need for reoperations have been reported with small-diameter head metal-on-metal devices. We retrospectively investigated mid-term clinical outcomes of small-head metal-on-metal total hip arthroplasty. Methods: We reviewed 159 hips in 139 patients who had a small-head metal-on-metal total hip arthroplasty (M2a Taper; Biomet, Warsaw, IN) with a minimum 5-year follow-up and documented postoperative complications. Results: Focal osteolysis in either the femur or acetabulum was observed in 12 hips (7.5%, 44 months after surgery on average), with pseudotumor observed in 8 hips (5%, 120 months after surgery on average). Four hips (2.5%) had dislocations (84 months after surgery on average) and six hips (3.8%, 122 months after surgery on average) underwent reoperation. Conclusion: Small-head metal-on-metal total hip arthroplasty is associated with a high degree of complications at mid-term follow-up period. Considering this, we discourage the use of metal-on-metal total hip arthroplasty regardless of head size.


2019 ◽  
Vol 4 (4) ◽  
pp. 2473011419S0042
Author(s):  
Brian Velasco ◽  
Bruno Moura ◽  
John Kwon

Category: Hindfoot, Trauma Introduction/Purpose: The axial alignment of the calcaneus has paramount importance in the management of these fractures. The Harris view has long stood as the recommended radiograph to assess axial alignment. However, given the obliquity at which the radiograph is obtained, it doesn´t represent a true axial view and is subject to inaccuracies secondary to rotational malpositioning of the foot and mismeasurement of angulation. Multiple reports have described the axial alignment as a surgical outcome, but usually this assessment of the residual deformity have no described method. The objectives of this study are to evaluate the capacity of Harris view to assess axial alignment in a cadaveric model and to describe the use of a true AP view of the calcaneus that we have named Captain´s view. Methods: Five below knee amputated fresh-frozen cadaveric specimens were used in the study. For each specimen, the soft tissues over the lateral side were removed to access to the lateral wall. A small wedge of the cuboid was removed to visualize the center of the calcaneocuboid articular surface. LCA-guide and a cannulated drill were used to create a tunnel in the axis of the calcaneus. An oblique osteotomy was performed in order to simulate a non-comminuted fracture. Varus deformity was created by inserting solid radiolucent wedges into the osteotomy to create models of 10, 20, and 30 degrees of varus angulation. Harris and Captain views were obtained for each specimen with 0 (control), 10, 20, and 30 degrees of varus malalignment. Measurements of the deformity were made digitally on each fluoroscopic image. Results: The average degrees of varus in Harris views were 10,9 (5,5-16); 11,5 (8,2-13,6); and 18,3 (13,3-23,6) for 10,20 and 30 degrees of deformity respectively. The average degrees of varus in Captain´s view were 13,0 (7,3-20,9); 18,4 (11,7-23,5); and 28,2 (24,4-31,1) for 10,20 and 30 degrees of deformity respectively. The average degrees of error for varus deformity in Harris views were 4,1 (41%); 8,4 (42%) and 11,6 (39%) for 10,20 and 30 degrees of deformity respectively. The average degrees of error for varus deformity in Captain´s views were 4,8 (48%); 3,6 (18%) and 2,8 (8%) for 10,20 and 30 degrees of deformity respectively. Conclusion: The results of this study show a high rate of mismeasurement for both radiographic views. Despite the average angles have a clear correlation with the severity of varus, the wide range of error observed between specimens make this assessment unreliable and inaccurate. We observed an improvement of accuracy of captain´s view for more severe deformities, but not with Harris views which maintain a 40% mismeasurement in all the settings. Therefore, intraoperative Harris views should not be used in isolation to evaluate axial alignment and Captain´s view provides an additional perspective that can be useful to rule out severe deformities.


Author(s):  
Ntamulenga Innocent ◽  
Mukanire Ntakwinja ◽  
Imani Prince ◽  
Kasereka Kikwaya ◽  
Nyakio Olivier ◽  
...  

Background: Adolescent births remain at high risk. The aim of this study was to determine the maternal prognosis of births among primiparous teenagers in South Kivu.Methods: A case-control study of 250 primiparous teenagers (cases) and another group of 500 primiparous adults aged 20-34 years (control) was performed in 4 General Reference Hospitals of South Kivu in Republic Democratic Congo. The study period was from January to December 2017. A survey sheet was used to collect the data. The analysis were performed using SPSS 22.0 and EPIINFO version 7.2.2.6.Results: Out of a total of 8490 deliveries recorded at the 4 General Reference Hospitals in South Kivu in 2017, authors recorded 250 deliveries of primiparous teenagers, or 2.9%. The maternal prognosis of adolescent deliveries was more marked by a high rate of caesarean section (OR=13.5), the presence of complications (OR=7.37), prolonged labor (OR=4.51), lesions soft tissues (OR=3.92), intraoperative bleeding (OR=3.26) and fever by puerperal infection (OR=2.13).Conclusions: The frequency of childbirth among primiparous teenagers and maternal-neonatal prognosis has been determined and is of concern. The prevention of adolescent obstetric complications includes the respect for the legal age of marriage, adequate antenatal care and childbirth in a specialized hospital setting.


2005 ◽  
Vol 284-286 ◽  
pp. 1069-0 ◽  
Author(s):  
Gregory Y. Lee ◽  
Ajay Srivastava ◽  
Darryl D. D'Lima ◽  
Pam Pulido ◽  
Clifford W. Colwell

The Omnifit-HA femoral stem component has shown excellent results in early clinical studies. This is an independent prospective study of the outcome of a ydroxyapatite-coated femoral component implanted by one surgeon with an intermediate-term follow up. The senior author performed 103 consecutive uncemented total hip arthroplasties in 96 patients from July 1991 to December 1996. The components implanted were the Omnifit-HA femoral stem and the Omnifit PSL porous-coated acetabular shell. The mean age at the time of the index procedure was 52 years old (range, 27–78) and male:female ratio was 54:42. Three patients were deceased and four patients were lost to follow-up. The mean follow up was 10.3 years (range, 7.3–12.7 years). Clinical and radiographic evaluations were performed by an independent observer. The average preoperative and postoperative Harris Hip Scores were 55 and 92, respectively. The overall survivorship of the Omnifit-HA stem was 100% with no femoral revisions. The survivorship of the Omnifit PSL cup was 89.7% with 4 acetabular revisions for aseptic loosening and 6 polyethelene liner exchanges for osteolysis or late instability. The mean polyethylene wear rate was 0.24 mm per year. This long-term follow up shows that the use of circumferentially coated hydroxyapatite stems can protect against the migration of wear debris along the femoral stem.


2014 ◽  
Vol 15 (1) ◽  
Author(s):  
Krzysztof Kmieć ◽  
Marek Synder ◽  
Piotr Kozłowski ◽  
Marek Drobniewski ◽  
Marcin Sibiński

2016 ◽  
Vol 2016 ◽  
pp. 1-5
Author(s):  
Tomoya Takasago ◽  
Tomohiro Goto ◽  
Keizo Wada ◽  
Daisuke Hamada ◽  
Toshiyuki Iwame ◽  
...  

The type of bearing material that should be used in revision surgery after the failure of ceramic-on-ceramic total hip arthroplasty (THA) remains controversial. In the case of ceramic fracture, the residual ceramic particles can cause consequent metallosis when metal implants are used for revision THA. On the other hand, in the case of THA failure without ceramic fracture, revision THA with a metal femoral head provides satisfactory results. We report an unusual case of progressive osteolysis due to metallosis that developed after revision THA for ceramic liner dissociation without a liner fracture performed using a metal femoral head and polyethylene liner. The residual metal debris and abnormal pumping motion of the polyethylene liner due to the breakage of the locking system or the aspherical metal shell being abraded by the ceramic head seemed to be the cause of the progressive osteolysis.


2017 ◽  
Vol 2017 ◽  
pp. 1-14
Author(s):  
Yuancan Huang ◽  
Shuai Li ◽  
Minshan Feng ◽  
Liguo Zhu

Rotation-traction (RT) manipulation is a commonly used physical therapy procedure in TCM (traditional Chinese medicine) for cervical spondylosis. This procedure temporarily separates the C3 and C4 cervical vertebrae from each other when a physician applies a jerky action while the neck is voluntarily turned by the patient to a specific position as instructed by the physician, where the cervical vertebrae are twisted and locked. However, a high rate of cervical injury occurs due to inexperienced physician interns who lack sufficient training. Therefore, we developed a cervical spine mechanism that imitates the dynamic behaviours of the human neck during RT manipulation. First, in vivo and in vitro experiments were performed to acquire the biomechanical feature curves of the human neck during RT manipulation. Second, a mass-spring-damper system with an electromagnetic clutch was designed to emulate the entire dynamic response of the human neck. In this system, a spring is designed as rectilinear and nonlinear to capture the viscoelasticity of soft tissues, and an electromagnetic clutch is used to simulate the sudden disengagement of the cervical vertebrae. Test results show that the mechanism can exhibit the desired behaviour when RT manipulation is applied in the same manner as on humans.


Sign in / Sign up

Export Citation Format

Share Document