scholarly journals Calcium Carbide Residue and Rice Husk Ash for improving the Compressive Strength of Compressed Earth Blocks

MRS Advances ◽  
2018 ◽  
Vol 3 (34-35) ◽  
pp. 2009-2014 ◽  
Author(s):  
Philbert Nshimiyimana ◽  
David Miraucourt ◽  
Adamah Messan ◽  
Luc Courard

ABSTRACTEarth stabilization, using two by-products available in Burkina Faso: Calcium Carbide Residue (CCR) and Rice Husk Ash (RHA), improved the performance of compressed earth blocks (CEBs). The effect of adding CCR or CCR: RHA (in various ratios) to the clayey earth was investigated. CEBs were molded by manually compressing moisturized mixtures of earthen materials and 0-15 % CCR or CCR: RHA (various ratios) with respect to the weight of earthen material. The results showed that, with 15 % CCR: RHA in 7: 3 ratio, the compressive strength of CEBs (6.6 MPa) is three times that of the CEBs containing 15 % CCR alone (2.2 MPa). This improvement was related to the pozzolanic reaction between CCR, clay and RHA. These CEBs comply with the requirement for wall construction of two-storey housing.

MRS Advances ◽  
2020 ◽  
Vol 5 (25) ◽  
pp. 1277-1283 ◽  
Author(s):  
Philbert Nshimiyimana ◽  
Hassan Seini Moussa ◽  
Adamah Messan ◽  
Luc Courard

AbstractThis study investigated the effect of production and curing parameters on the mechanical performance of compressed earth blocks (CEBs) stabilized with 0-20 wt % CCR (calcium carbide residue). Kaolinite (K) and quartz (Q)-rich earthen materials were mixed with the CCR and used to mould CEBs at optimum moisture content (OMC) and OMC+2 % of the dry mixtures, cured at 20 °C, ambient temperature in the lab (30±5 °C) and 40 °C for 0-90 days. After curing, the reactivity of the materials and compressive strength of dry CEBs were tested. Increasing the moulding moisture from OMC to OMC+2 decreased the compressive strength 0.3 times (4.4 to 3.3 MPa) for the CEBs stabilized with 20 % CCR cured at 30±5 °C for 45 days. Similarly, the compressive strength (4.4 MPa) was reached by CEBs stabilized with 10 and 20 % CCR after 28 and 45 days of curing, respectively. At 40 °C, the compressive strength increased 3.3 times (1.1 to 4.7 MPa with 0 to 20 % CCR) for K-rich and 2.5 times (2 to 7.1 MPa) for Q˗rich materials. At 20 °C, the compressive strength increased only 1.3 times (1.1 to 2.5 MPa) for K˗rich and barely 0.7 times (2 to 3.4 MPa) for Q-rich materials. These suggest that CCR is useful for stabilization and improving the performances of CEBs in hot regions.


2021 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Agung Prayogi

Abstract Concrete is the most widely used material throughout the world and innovations continue to be carried out to produce efficient development. Shell charcoal ash and rice husk ash are industrial by-products which have the potential to replace sand for concrete mix, especially in Indragiri Hilir. The research with the title "Effect of Mixture of Rice Husk Ash and Shell Ash Ashes as Substitute for Some Fine Aggregates Against Concrete Compressive Strength" aims to prove the effect of a mixture of shell charcoal ash and husk ash to replace some of the sand to produce maximum compressive strength. Concrete is a mixture of Portland cement, fine aggregate, coarse aggregate, and water. This research uses 5 variations of the mixture to the weight of sand, BSA 0 without a substitute mixture, BSA 1 with a mixture of 5% husk ash and 10% shell charcoal, BSA 2 with a mixture of 5% husk ash and 15% charcoal ash, BSA 3 with a mixture of 5% husk ash and 18% charcoal, BSA 4 with a mixture of 10% husk and 10% charcoal, and BSA 5 with a mixture of 13% husk ash and 10% charcoal ash. SNI method is used for the Job Mix Formula (JMF) mixture in this research. The results of the average compressive strength of concrete at 28 days for JMF of 21.05 MPa, BSA 1 of 23.68 MPa, BSA 2 of 22.23 MPa, BSA 3 of 14.39 MPa, BSA 4 of 13.34 MPa , and BSA 5 of 20.14 MPa. The conclusion drawn from the results of the BSA 1 research with a mixture of 5% husk ash and 15% charcoal ash produced the highest average compressive strength of 23.68 MPa. Abstrak Beton merupakan material paling banyak digunakan diseluruh dunia dan terus dilakukan inovasi untuk menghasilkan pembangunan yang efisien. Abu arang tempurung dan abu sekam padi merupakan hasil sampingan industri yang berpotensi sebagai pengganti pasir untuk campuran beton, khususnya di Indragiri Hilir. Penelitian dengan judul “Pengaruh Campuran Abu Sekam Padi dan Abu Arang Tempurung Sebagai Pengganti Sebagian Agregat Halus Terhadap Kuat Tekan Beton” ini bertujuan membuktikan adanya pengaruh campuran abu arang tempurung dan abu sekam untuk mengganti sebagian pasir hingga menghasilkan kuat tekan maksimum. Beton adalah campuran antara semen portland, agregat halus, agregat kasar, dan air. Penelitian ini menggunakan 5 variasi campuran terhadap berat pasir, BSA 0 tanpa campuran pengganti, BSA 1 dengan campuran 5 % abu sekam dan 10% arang tempurung, BSA 2 dengan campuran 5% abu sekam dan 15% abu arang, BSA 3 dengan campuran 5% abu sekam dan 18% arang, BSA 4 dengan campuran 10% sekam dan 10% arang, dan BSA 5 dengan campuran 13% abu sekam dan 10% abu arang. Metode SNI digunakan untuk campuran Job Mix Formula (JMF)  pada penelitian ini. Hasil rata-rata kuat tekan beton pada umur 28 hari untuk JMF sebesar 21,05 MPa, BSA 1 sebesar 23,68 MPa, BSA 2 sebesar 22,23 MPa, BSA 3 sebesar 14,39 MPa, BSA 4 sebesar 13,34 MPa, dan BSA 5 Sebesar 20,14 MPa. Ditarik kesimpulan dari hasil penelitian BSA 1 dengan campuran 5% abu sekam dan 15% abu arang menghasilkan rata-rata kuat tekan tertinggi yaitu sebesar 23,68 MPa.  


2019 ◽  
Vol 221 ◽  
pp. 1-11 ◽  
Author(s):  
Yuyi Liu ◽  
Che-Way Chang ◽  
Abdoullah Namdar ◽  
Yuexin She ◽  
Chen-Hua Lin ◽  
...  

2018 ◽  
Vol 7 (4.35) ◽  
pp. 388
Author(s):  
Siti Asmahani Saad ◽  
Nasir Shafiq ◽  
Mariana Mohamed Osman ◽  
Siti Aliyyah Masjuki

High amount of reactive silica is ubiquitous in pozzolanic reaction for concrete strength increment. Rice husk ash (RHA) is proven contains high content of amorphous silica that is essential in the pozzolanic reaction of effective additive in concrete. Nevertheless, incorporation of RHA as cement replacement material (CRM) or additive is very minimal in current concrete industry. Therefore, improvement on the RHA properties by introduction of thermal and chemical pretreatment prior to incineration process is considered as a promising way in order to achieve the goal. This treatment process has been reported widely in literature. In this paper, the effect of treated rice husk ash (TRHA) and non-treated rice husk ash (NTRHA) incorporated mortar in terms of its compressive strength and microstructure properties are examine subsequently. The strength activity of TRHA from the optimum treatment process was measured by testing the compressive strength of mortars. The highest compression value obtained was 50.73MPa with 3% UFTRHA replacement at 28 days. At a longer curing period i.e. 90 days, it was recorded that 3% of UFTRHA mortar had the highest compression value at 53.87MPa. As for microstructure properties, a denser microstructure with excellent aggregate bonding and cement matrix in the interfacial transition zone (ITZ) was observed.


Sign in / Sign up

Export Citation Format

Share Document