scholarly journals PENGARUH CAMPURAN ABU SEKAM PADI DAN ABU ARANG TEMPURUNG SEBAGAI PENGGANTI SEBAGIAN AGREGAT HALUS TERHADAP KUAT TEKAN BETON

2021 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Agung Prayogi
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Coarse Aggregate ◽  
Rice Husk Ash ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Fine Aggregates ◽  
Compressive Strength Of Concrete ◽  
Average Compressive Strength ◽  
By Products

Abstract Concrete is the most widely used material throughout the world and innovations continue to be carried out to produce efficient development. Shell charcoal ash and rice husk ash are industrial by-products which have the potential to replace sand for concrete mix, especially in Indragiri Hilir. The research with the title "Effect of Mixture of Rice Husk Ash and Shell Ash Ashes as Substitute for Some Fine Aggregates Against Concrete Compressive Strength" aims to prove the effect of a mixture of shell charcoal ash and husk ash to replace some of the sand to produce maximum compressive strength. Concrete is a mixture of Portland cement, fine aggregate, coarse aggregate, and water. This research uses 5 variations of the mixture to the weight of sand, BSA 0 without a substitute mixture, BSA 1 with a mixture of 5% husk ash and 10% shell charcoal, BSA 2 with a mixture of 5% husk ash and 15% charcoal ash, BSA 3 with a mixture of 5% husk ash and 18% charcoal, BSA 4 with a mixture of 10% husk and 10% charcoal, and BSA 5 with a mixture of 13% husk ash and 10% charcoal ash. SNI method is used for the Job Mix Formula (JMF) mixture in this research. The results of the average compressive strength of concrete at 28 days for JMF of 21.05 MPa, BSA 1 of 23.68 MPa, BSA 2 of 22.23 MPa, BSA 3 of 14.39 MPa, BSA 4 of 13.34 MPa , and BSA 5 of 20.14 MPa. The conclusion drawn from the results of the BSA 1 research with a mixture of 5% husk ash and 15% charcoal ash produced the highest average compressive strength of 23.68 MPa. Abstrak Beton merupakan material paling banyak digunakan diseluruh dunia dan terus dilakukan inovasi untuk menghasilkan pembangunan yang efisien. Abu arang tempurung dan abu sekam padi merupakan hasil sampingan industri yang berpotensi sebagai pengganti pasir untuk campuran beton, khususnya di Indragiri Hilir. Penelitian dengan judul “Pengaruh Campuran Abu Sekam Padi dan Abu Arang Tempurung Sebagai Pengganti Sebagian Agregat Halus Terhadap Kuat Tekan Beton” ini bertujuan membuktikan adanya pengaruh campuran abu arang tempurung dan abu sekam untuk mengganti sebagian pasir hingga menghasilkan kuat tekan maksimum. Beton adalah campuran antara semen portland, agregat halus, agregat kasar, dan air. Penelitian ini menggunakan 5 variasi campuran terhadap berat pasir, BSA 0 tanpa campuran pengganti, BSA 1 dengan campuran 5 % abu sekam dan 10% arang tempurung, BSA 2 dengan campuran 5% abu sekam dan 15% abu arang, BSA 3 dengan campuran 5% abu sekam dan 18% arang, BSA 4 dengan campuran 10% sekam dan 10% arang, dan BSA 5 dengan campuran 13% abu sekam dan 10% abu arang. Metode SNI digunakan untuk campuran Job Mix Formula (JMF)  pada penelitian ini. Hasil rata-rata kuat tekan beton pada umur 28 hari untuk JMF sebesar 21,05 MPa, BSA 1 sebesar 23,68 MPa, BSA 2 sebesar 22,23 MPa, BSA 3 sebesar 14,39 MPa, BSA 4 sebesar 13,34 MPa, dan BSA 5 Sebesar 20,14 MPa. Ditarik kesimpulan dari hasil penelitian BSA 1 dengan campuran 5% abu sekam dan 15% abu arang menghasilkan rata-rata kuat tekan tertinggi yaitu sebesar 23,68 MPa.  

scholarly journals Pengaruh Cangkang Kerang Laut Terhadap Kuat Tekan Beton

2021 ◽  
Vol 2 (1) ◽  
pp. 46-54
Author(s):  
Neti Rahmawati ◽  
Irwan Lakawa ◽  
Sulaiman Sulaiman
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Building Materials ◽  
Coarse Aggregate ◽  
Fine Aggregate ◽  
Fine Aggregates ◽  
Concrete Quality ◽  
Compressive Strength Of Concrete ◽  
Physical Construction

Concrete is one of the most widely used building materials today interms of physical construction. Concrete is made from a mixture offine, coarse aggregate, cement, and water with a certain ratio, aswell as materials that are usually added to the concrete mixtureduring or during mixing, to changing the properties of concrete tomake it more suitable in certain jobs and more economical, can alsobe added with certain other mixed materials as needed if deemednecessary. Seashells can be used to mix concrete. This study aims todetermine whether the addition of shells aggregate shells in aconcrete mixture can affect the mechanical properties of concrete.The specimens used are in the form of cubes with a size of 15cm x 15cm x 15 cm, consisting of additional concrete coarse and fineaggregate with shell substitution percentage of 0%, 15%, 20% with atotal sample of 45, with the planned concrete quality of K225. Theuse of sea shells in increasing the compressive strength of concrete isbetter used as fine aggregate than coarse aggregate. The use of seashells as a substitute for fine aggregates achieves maximum resultsat 20% composition.

scholarly journals Penelitian Beton dengan Penambahan Abu Sekam Padi dan Limbah Keramik sebagai Substitusi Semen

2020 ◽  
Vol 3 (2) ◽  
pp. 275
Author(s):  
Olyndia Febrianita ◽  
Ahmad Ridwan ◽  
Yosef Cahyo Setianto Poernomo
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Cylindrical Specimen ◽  
National Standard ◽  
Construction Sector ◽  
Ceramic Waste ◽  
Concrete Mixtures ◽  
Compressive Strength Of Concrete ◽  
Average Compressive Strength

Concrete is a technology that continues to develop in the construction sector. Continues to increase in terms of cost. The need for materials to form concrete requires innovation in the use of concrete mixtures. One of them is using the innovation of rice husk ash and ceramic waste. These ingredients is held in the cement content, namely rice husk ash containing silica and ceramic waste containing alumina. The method used refers to the Indonesian National Standard with a cylindrical specimen measuring 15x30 cm tested at 28 days, and the planned quality is fc '14.5 Mpa. The research objective was to determine the compressive strength and slump value by adding a mixture of rice husk ash 3%, 6%, 9%, 12%, and ceramic waste 3% by weight of cement. The results showed that the slump value decreased with the lowest value of 13.5 cm. the results of the compressive strength of concrete with the addition of rice husk ash and ceramic waste have not achieved the planned quality. The average compressive strength that has the highest value is the addition of 9% rice husk ash with 9% ceramic waste, namely 6.53 Mpa.Beton merupakan salah satu teknologi yang terus berkembang di bidang konstruksi. Terus meningkat dari segi biaya, Kebutuhan bahan untuk membentuk beton membutuhkan inovasi dalam penggunaan campuran beton. Salah satunya dengan inovasi pemanfaatan abu sekam padi dan limbah keramik. Bahan tersebut tertahan di dalam kandungan semen yaitu abu sekam padi yang mengandung silika dan limbah keramik yang mengandung alumina. Metode yang digunakan mengacu pada Standar Nasional Indonesia dengan spesimen silinder berukuran 15x30 cm yang diuji pada 28 hari, dan kualitas yang direncanakan adalah fc '14 .5 Mpa. Tujuan penelitian untuk mengetahui kuat tekan dan nilai slump dengan menambahkan campuran abu sekam padi 3%, 6%, 9%, 12%,   dan   limbah   keramik   3%   dari   berat  semen.   Hasil Penelitian menunjukkan nilai slump mengalami penurunan dengan nilai terendah 13,5cm. Hasil kuat tekan beton dengan penambahan abu sekam padi dan limbah keramik belum mencapai kualitas yang direncanakan. Kuat tekan rata-rata yang memiliki nilai tertinggi adalah penambahan abu sekam 9% dengan limbah keramik 9% yaitu 6,53 Mpa

scholarly journals Limbah Beton Sebagai Material Agregat Halus Terhadap Kuat Tekan Karakteristik

2019 ◽  
Vol 6 (2) ◽  
pp. 145
Author(s):  
Budiman Budiman
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Building Construction ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Fine Aggregates ◽  
Fineness Modulus

Concrete waste from building construction can cause problems for the environment [1]. The use of fine aggregates from concrete waste can be a solution. The purpose of this study is to determine the value of aggregate characteristics and the value of concrete compressive strength from the utilization of concrete waste as substitution fine aggregate use the DOE (department of environment) method and referring to standards SNI. This study used 50% and 60% waste mortal substitution on sand. The results showed that the characteristics of fine aggregate and coarse aggregate met the characteristic requirements for fineness modulus sand of 2.65 (Zone 2) while the aggregate was roughly 6.44 (Zone 3). The value of compressive strength with 50% and 60% concrete waste substitution each obtained the value of characteristic compressive strength of 57.24 kg / cm² and 101.03 kg / cm². The value of using mortar waste as fine aggregate substitution gives a positive value to the quality of concrete. This is evidenced increase in the value of 14.89% in concrete waste substitution 60%.

scholarly journals Kajian Pengaruh Variasi Material Terhadap Kuat Tekan Beton

2018 ◽  
Vol 3 (1) ◽  
pp. 55
Author(s):  
Suhendra Suhendra
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Coarse Aggregates ◽  
Fine Aggregates ◽  
Laboratory Test Results

Aggregate quality is very influential on the strength of the resulting concrete. Both coarse and fine aggregates have various characteristics identified from laboratory test results. This study aims to examine the use of various aggregates for a quality of concrete. The coarse aggregate and the fine aggregate used are obtained from the nearest location to the work to be performed. The quality of the concrete reviewed is K-125, K-175 and K-225. The coarse aggregates used are 1-2 size (in cm), 2-3 size (in cm) crushed aggregate and coral. The fine aggregates used for each of the coarse aggregates are also different. The results showed that the coral aggregate did not meet the gradations of concrete aggregate. While the fine aggregate does not meet the gradation of concrete aggregate for the three types used. The concrete compressive strength test results show the use of coarse aggregates of 2-3 size of crushed and coarse aggregate of corals giving the average compressive strength value required for all planned concrete strength. While concrete using coarse aggregates of rocks of size 1-2 only meet the specified compressive strength, but does not meet the required compressive strength.Key words: Aggregates, concrete, compressive strength

scholarly journals The Effect of Rise Husk Ash on Concrete Mixing Quality Formula

2020 ◽  
Vol 4 (1) ◽  
pp. 29-36
Author(s):  
Hurul 'Ain ◽  
Alan Putranto ◽  
Betti Ses Eka Polonia ◽  
Ahmad Ravi
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Testing Machine ◽  
Test Material ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Additional Material ◽  
Material Sources ◽  
Alternative Material

The effect of the addition of rice husk ash (rice husk ash) to the K-175 formula quality concrete mixture, as an aggregate mixture to the concrete compressive strength test using a Compression Testing Machine to get the compressive strength value of concrete and can be used as an alternative material as an additional material in making concrete in improving the quality of building construction. The study uses K-175 concrete quality characteristics as a test material. Test object in the shape of a cube with a size of 15cm x 15cm. With 4 variations in levels of addition of rice husk ash by 0%, 1.5%, 3.5%, and 5% by weight of cement. The husk ash used is the husk ash that escaped the 2.36 mm filter size. From each type of mixture made 9 test specimens, every 3 specimens for the age of concrete 7 days, 14 days and 28 days. Concrete mortar design using ASTM method. With material sources using fine aggregate from the Pawan Ketapang River and coarse aggregate from Merak, Banten. Stages of implementation include examining the nature of aggregate materials, sample making, and testing of concrete compressive strength.

scholarly journals THE EFFECT OF COMPARISON OF CONCRETE USING TANGKILING SAND AND KAPUAS SAND ON THE COMPRESSIVE STRENGTH OF CONCRETE

2020 ◽  
Vol 8 (1) ◽  
pp. 36-41
Author(s):  
Whendy Trissan ◽  
Yongki Pratomo
Keyword(s):  
Compressive Strength ◽  
Total Sample ◽  
Concrete Mixture ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Study Program ◽  
Fine Aggregates ◽  
Compressive Strength Of Concrete ◽  
Building Engineering

In general, concrete fillers are made from materials that are easily obtained, easily processed, and have the durability and strength that is very much needed in particular construction of coarse and fine aggregates, each region would have different aggregates as the main ingredients in making concrete. The research conducted aims to determine how the optimum compressive strength value of the concrete produced from the addition of Kapuas Sand to the concrete mixture. In this research, Kapuas Sand is used as a fine aggregate enhancer. The percentage variation of Kapuas red sand used in this study varies, namely 0%, 25%, 50%, 75%, and 100%. Concrete mixture planning using SNI 03-2834-2000. The test uses cylindrical specimens with a height of 30 cm, a diameter of 15 cm with a total sample of 10 cylinders for each addition of Kapuas Sand so that the total specimens are 50 cylinders. Testing is carried out at the age of 14 and 28 days in the Laboratory of Building Engineering Education Study Program, Faculty of Teacher Training and Education, University of Palangka Raya. The results of the compressive strength of concrete using a mixture of Kapuas Sand at 28 days 0% 25%, 50%, 75% and, 100% respectively were 24.71 MPa, 21.79 MPa, 25.36 MPa, 23 .3 MPa, and .22.62 MPa. This result shows the compressive strength value of concrete in the concrete mix with a percentage of 50% that is equal to 25.36 MPa while the compressive strength of normal concrete is 24.71 MPa so that the compressive strength of concrete is 2.66% of normal concrete compressive strength with age concrete compressive strength 28 days.

EFFECT OF SLAG AND GLASS ON CONCRETE PROPERTIES

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Pranshoo Solanki ◽  
Ryan Long ◽  
Xi Hu
Keyword(s):  
Compressive Strength ◽  
Glass Powder ◽  
Fine Aggregate ◽  
Substitution Level ◽  
Concrete Mixtures ◽  
Steel Manufacturing ◽  
Fine Aggregates ◽  
Glass Sand ◽  
Compressive Strength Of Concrete ◽  
By Products

New innovative ways are being developed to recycle by-products and waste material in concrete that otherwise would end up in landfill. Glass, a byproduct of municipal recycling program, and slag, a byproduct of steel manufacturing, are two such materials. Therefore, the aim of this study was to evaluate the effect of partially substituting sand with glass powder and cement with slag on compressive strength and electrical resistivity of concrete. A total of 16 concrete mixtures including one control with different substitution level of sand with glass and cement with slag were designed and further tested for compressive strength. Portland cement was substituted with 0%, 10%, 20%, 30%, 40% and 50% slag by weight. On the other hand, fine aggregates (or sand) was substituted with glass sand, with level of 20%, 40%, 60%, 80% and 100% by weight. Additional selected mixes were prepared by substituting both cement (20%, 40%, 50%) and fine aggregates (20%, 40%, 60%) with slag and glass, respectively. Cement substitution with slag up to 40% was found to increase the compressive strength of concrete beyond which decrease in strength was noticed. Fine aggregate substitution with glass powder produced concrete weaker than the control specimens. Mixes prepared by substituting 40% cement with slag and 20% fine aggregates with glass powder produced highest strength among all the different combinations of slag and glass containing specimens.

scholarly journals APLIKASI LOGIKA FUZZY SUGENO UNTUK PREDIKSI NILAI SLUMP DAN KUAT TEKAN BETON

BANGUNAN ◽  
2020 ◽  
Vol 25 (1) ◽  
pp. 33
Author(s):  
Fairuza Putri Prastowo ◽  
Bambang Djatmiko ◽  
N. Bambang Revantoro
Keyword(s):  
Compressive Strength ◽  
Fuzzy Logic ◽  
Coarse Aggregate ◽  
P Value ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Multiple Input ◽  
Compressive Strength Of Concrete ◽  
Input Variables ◽  
Minimum Medium

Abstrak:Salah satu faktor yang mempengaruhi nilai slump dan kuat tekan beton adalah bahan-bahan penyusun beton. Logika fuzzy Sugeno digunakan untuk prediksi nilai slump dan kuat tekan beton dengan bantuan software MATLAB versi 8.5.0.197613 R2015a. Penelitian menggunakan desain eksperimental aplikatif dan validasi dengan sistem Multiple Input Double Output (MIDO). Hasil penelitian : 1) Variabel multiple input terdiri dari semen, agregat kasar, agregat halus, dan air. Variabel double output terdiri dari nilai slump dan kuat tekan beton. 2) Himpunan fuzzy yang digunakan himpunan variabel linguistik minimum-medium-maksimum dengan fungsi keanggotaan segitiga. 3) Perhitungan cara manual dengan 4 tahapan, yaitu: membuat himpunan dan multiple input variabel, aplikasi fungsi implikasi, komposisi aturan, dan deffuzifikasi. 4) Perhitungan cara komputasi. 5) Hasil validitas diperoleh: a) hasil perhitungan ouput cara manual sama dengan output cara komputasi, yaitu nilai slump 8,75 cm dan kuat tekan 50 MPa, b) uji linearitas menghasilkan nilai koefisien determinasi R2 sama dengan 0,967 lebih dari 0,95 untuk slump dan R2 sama dengan 0,9516 lebih dari 0,95 untuk kuat tekan beton, c) uji beda rerata didapat P-value 0,200 lebih dari 0,05 untuk slump dan P-value 0,136 lebih dari 0,05 untuk kuat tekan beton. Maka, program dinyatakan valid dan layak digunakan. 6) Simulasi aplikasi logika fuzzy Sugeno dilakukan 5 kali dengan hasil: a) Jumlah semen, jumlah agregat kasar, jumlah agregat halus dan jumlah air berbanding lurus dengan nilai slump dan kuat tekan beton, b) Jumlah semen berbanding terbalik dengan air. Apabila jumlah semen maksimum dan jumlah air minimum maka menghasilkan nilai slump minimum dan kekuatan tekan beton maksimum dan sebaliknya, c) Agregat halus berbanding lurus dengan agregat kasar. Sehingga nilai slump dan kuat tekan beton akan mengalami minimum, medium dan maksimum apabila agregat kasar medium dan agregat halus medium.Kata-kata kunci: Logika fuzzy, Metode Sugeno, slump beton, kuat tekan beton.Abstract: One of the factors that influence the value of slump and compressive strength of concrete is the ingredients of concrete. Sugeno fuzzy logic is used to predict slump values and concrete compressive strength with the help of MATLAB software version 8.5.0.197613 R2015a. The study uses an applicative experimental design and validation with a Multiple Input Double Output (MIDO) system. Results: 1) Multiple input variables consisting of cement, coarse aggregate, fine aggregate, and water. The double output variable consists of slump value and concrete compressive strength. 2) Fuzzy set which is used minimum-medium-maximum linguistic variable set with triangle membership function. 3) Calculation of the manual method with 4 stages, namely: creating sets and multiple input variables, application of function implications, composition of rules, and deffuzification. 4) Calculation of computational methods. 5) The validity results are obtained: a) the results of manual output calculation are the same as the output of the computational method, namely the slump value of 8.75 cm and compressive strength of 50 MPa, b) the linearity test produces a coefficient of determination R2 is 0.967 more than 0.95 for the slump and R2 is 0.9516 more than 0.95 for concrete compressive strength, c) the average difference test obtained P-value 0.200 more than 0.05 for slump and P-value 0.136 more than 0.05 for concrete compressive strength. Then, the program is declared valid and is feasible to use. 6) Sugeno fuzzy logic application simulation is done 5 times with the results: a) The amount of cement, the amount of coarse aggregate, the amount of fine aggregate and the amount of water is directly proportional to the slump value and concrete compressive strength, b) The amount of cement is inversely proportional to water. If the maximum amount of cement and minimum amount of water results in a minimum slump value and maximum concrete compressive strength and vice versa, c) Fine aggregate is directly proportional to coarse aggregate. So the value of slump and compressive strength of concrete will experience a minimum, medium and maximum if the coarse aggregate is medium and the fine aggregate is medium.Keywords: Fuzzy logic, Sugeno Method, concrete slump, strong concrete reach.

Effect of Microwave Incinerated Rice Husk Ash (MIRHA) on Workability and Compressive Strength of Concrete

2014 ◽  
Vol 935 ◽  
pp. 193-196 ◽  
Author(s):  
Asma Abd Elhsameed ◽  
Nasir Shafiq ◽  
Muhd Fadhil Nuruddin
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Negative Effects ◽  
Concrete Production ◽  
Hardened Properties ◽  
Compressive Strength Of Concrete ◽  
By Products

Agricultural and industrial by-products are commonly used in concrete production as cement replacement materials (CRMs) or as admixtures to enhance both fresh and hardened properties of concrete as well as to save the environment from the negative effects caused by their disposal. This paper presents some findings on the effect of Microwave Incinerated Rice Husk Ash (MIRHA) on workability and compressive strength of concrete. It was obtained that the inclusion of MIRHA as partial replacement of cement could significantly improve the compressive strength of hardened concrete while reducing the workability of fresh concrete.

Utilization of Cockle Shell (Anadara Granosa) as Partial Replacement of Fine Aggregates in Concrete

2021 ◽  
Vol 6 (2) ◽  
pp. 96-103
Author(s):  
Ranno Marlany Rachman ◽  
Try Sugiyarto Soeparyanto ◽  
Edward Ngii
Keyword(s):  
Compressive Strength ◽  
National Standard ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Concrete Technology ◽  
Normal Concrete ◽  
Fine Aggregates ◽  
Blood Clam ◽  
Anadara Granosa

This research aimed to utilize Anadara Granosa (Blood clam shell) clamshell waste as a new innovation in concrete technology and to investigate the effect of Anadara Granosa clamshell powder utilization as an aggregate substitution on the concrete compressive strength. The sample size was made of cylinders with a size of 10 cm x 20 cm with variations of clamshell powder 10%, 20% and 30% from the fine aggregate volume then soaked for 28 days as per the method of the Indonesian National Standard. The evaluation results exhibited that the slump value exceeded the slump value of normal concrete with a slump value of 0% = 160 mm, 10% = 165 mm, 20% = 180 mm and 30% = 180 mm. Additionally, it was found that the concrete compressive strength obtained post 28 days were 20.78 Mpa, 21.95 Mpa, 21.17 Mpa and 24.28 Mpa for normal concrete (0%), substitution concrete (10%), substitution concrete (20%) and substitution concrete (30%), respectively. Leading on from these results, it was concluded that the increment of Anadara Granosa clamshell powder substitution led to the increase of concrete compressive strength test.

Sign in / Sign up

Export Citation Format

Share Document