Physicomechanical and Antimicrobial Characteristics of Cement Composites with Selected Nano-Sized Oxides and Binary Oxide Systems

In recent years, increasing attention has been paid to the durability of building materials, including those based on cementitious binders. Important aspects of durability include the increase of the strength of the cement matrix and enhancement of material resistance to external factors. The use of nanoadditives may be a way to meet these expectations. In the present study, zinc, titanium and copper oxides, used in single and binary systems (to better the effect of their performance), were applied as additives in cement mortars. In the first part of this work, an extensive physicochemical analysis of oxides was carried out, and in the second, their application ranges in cement mortars were determined. The subsequent analyses were employed in determining the physicochemical properties of pristine oxides: Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray fluorescence (EDXRF), scanning electron microscopy (SEM), measurement of the particle size distribution, as well as zeta potential measurement depending on the pH values. Influence on selected physicomechanical parameters of the cement matrix and resistance to the action of selected Gram-positive and Gram-negative bacteria and fungi were also examined. Our work indicated that all nanoadditives worsened the mechanical parameters of mortars during the first 3 days of hardening, while after 28 days, an improvement was achieved for zinc and titanium(IV) oxides. Binary systems and copper(II) oxide deteriorated in strength parameters throughout the test period. In contrast, copper(II) oxide showed the best antibacterial activity among all the tested oxide systems. Based on the inhibitory effect of the studied compounds, the following order of microbial susceptibility to inhibition of growth on cement mortars was established (from the most susceptible, to the most resistant): E. coli < S. aureus < C. albicans < B. cereus = P. aeruginosa < P. putida.

Chemical and Microstructural Properties of Designed Cohesive M-S-H Pastes

Concretes can be exposed to a magnesium attack in several environments leading to the formation of magnesium silicate hydrates (M-S-H) and brucite (MH). The formation of M-S-H is likely to alter the properties of the cement matrix because it is linked to the decalcification of C-S-H. However, relatively few data on M-S-H exist in the literature. In order to characterize, physically and mechanically, the M-S-H phase, pure M-S-H cohesive pastes are needed. This work studies the formation of cohesive M-S-H pastes made with MgO-to-SiO2 atomic ratios of 0.78, 1 and 1.3, from two types of silica (silica fume or colloidal silica) and under 20 °C and 50 °C thermal curing. X-ray diffraction and thermogravimetric analyses confirmed that the consumption of brucite and the formation of M-S-H were quicker with a 50 °C curing. Energy-dispersive X-ray spectroscopy and microtomography showed that colloidal silica enabled a better distribution of the particles than silica fume. Microstructural characterizations were conducted under the protocol with colloidal silica and 50 °C thermal curing. Porosity investigations allowed to describe the M-S-H pastes as highly porous materials with a low content of micropores in comparison with mesopores. The type of mixing influenced the mesopore size distribution.

Study on Strengthening Mechanism of Epoxy Resin/Rubber Concrete Interface by Molecular Dynamics Simulation

Rubber concrete has high environmental and economic benefits. However, the difference in the physical and chemical properties of the interface causes a weak interface between rubber and concrete, which limits the use of rubber concrete to a certain extent. Based on the macroexperiment of epoxy resin (EP) modified rubber concrete, from the nanoscale level, three interface models of Rh (natural rubber)/C-S-H, EP/C-S-H, and Rh/EP/C-S-H were constructed by molecular dynamics simulation to explore the interaction between epoxy resin and rubber cement-based interface and reveal its microreinforcement mechanism. The results of interaction energy, radial distribution function, and mean square displacement show that the addition of EP not only improves the interface interaction energy between Rh and C-S-H but also provides a large number of hydrogen bond donors and receptors, promotes the diffusion of Ca, and increases the adhesion between Rh and cement matrix. The results of the analysis of mechanical properties show that the elastic modulus of the rubber concrete interface model is improved and the interface properties are improved after adding EP.

The Effect of Bacteria on Early Age Strength of CEM I and CEM II Cementitious Composites

Despite being associated with lower carbon emissions, CEM II cementitious materials exhibit reduced early age strength compared to that of CEM I. Several studies have demonstrated early age strength improvements by incorporating bacterial cells in concrete. In this study, live vegetative bacteria and dead bacteria killed in two different ways were used to explore whether changes in strength are related to the bacteria’s viability or their surface morphology. Compressive and flexural strength tests were performed at mortars with and without bacteria for both CEM I and CEM II cement. Their microstructure, porosity and mineralogy were also examined. No net strength gain was recorded for either CEM I or CEM II bacterial mortars compared to non-bacterial controls, although changes in the porosity were reported. It is proposed that two phenomena, one causing strength-reduction and one causing strength-gain, took place in the bacterial specimens, simultaneously. It is suggested that each phenomenon is dependent on the alkalinity of the cement matrix, which differs between CEM I and CEM II mortars at early age. Nevertheless, in neither case could it be recommended that the addition of bacteria is an effective way of increasing the early age strength of mortars.

Mechanisms and Critical Technologies of Transport Inhibitor Agent (TIA) throughout C-S-H Nano-Channels

The critical issue of the durability of marine concrete lies in the continuous penetration and rapid enrichment of corrosive ions. Here a new ion transfer inhibitor, as TIA, with calcium silicate hydrate (C-S-H) interfacial affinity and hydrophobicity is proposed through insights from molecular dynamics into the percolation behavior of the ion solution in C-S-H nano-channels and combined with molecular design concepts. One side of the TIA can be adsorbed on the surface of the cement matrix and can form clusters of corrosive ions to block the gel pores so as to resist the ion solution percolation process. Its other side is structured as a hydrophobic carbon chain, similar to a door hinge, which can stick to the matrix surface smoothly before the erosion solution is percolated. It can then change into a perpendicular chain shape to reduce the percolation channel’s diameter and thereby inhibit the percolation when ions meet the inhibitor. Therefore, once the erosion solution contacts TIA, it can quickly chelate with calcium ions and erosion ions at the interface to form clusters and compact pores. In addition, the water absorption, chloride migration coefficient, and chloride content of concrete samples decreased significantly after adding TIA, proving that TIA can effectively enhance the durability of cement-based materials. The structure–activity relationship of ion transfer that is proposed can provide new ideas for solving the critical problems of durability of cement-based materials and polymer molecular design.

Influence of Crystalline Admixtures and Their Synergetic Combinations with Other Constituents on Autonomous Healing in Cracked Concrete—A Review

Crystalline admixtures (CAs) are new materials for promoting self-healing in concrete materials to repair concrete cracks. They have been applied to tunnel, reservoir dam, road, and bridge projects. The fundamental research and development of CAs are needed concerning their practical engineering applications. This paper reviews the current research progress of commercial CAs, including self-made CA healing cracks; the composition of CA; healing reaction mechanism; the composition of healing products; distribution characteristics of healing products; the influence of service environment and crack characteristics on the healing performance of CA; and coupling healing performance of CA with fiber, expansive agent, and superabsorbent polymers. The current research findings are summarized, and future research recommendations are provided to promote the development of high-performance cement matrix composites.

Structural, physical and mechanical changes of cement-bonded particleboards during sudden fluctuations in temperature and moisture

The paper presents research focused on behaviour of cement-bonded particleboards with modified composition during sudden changes of temperature and humidity. Four types of boards were made—one control and three modified ones. Finely ground limestone was used as a modifying component in binder. Secondary wood particles made from crushing cuttings of cement-bonded particleboards were used as chips substituent. Two sets of test specimens (1 set = 6 test specimens) were manufactured. The first set was stored in laboratory conditions. The second set was subjected to 10 cycles of sudden changes of temperature (− 20 °C to + 70 °C) and humidity in accordance with EN 321 (further in the paper referred to as “wet–frost–dry cycle”.) After each cycle, dimensions and mass of the test specimens as well as ultrasonic pulse velocity were determined. A detailed analysis of structural changes in boards during cycling was carried out by an optical microscope. After 10 wet–frost–dry cycles were completed, bending strength and modulus of elasticity in bending were determined. The analysis of test results implies a very good relation between change of ultrasonic pulse velocity and width of cracks in the area of interfacial zone between cement matrix and wood particles. This finding also corresponds with dimensional and volumetric changes of the boards. Dependence of bending strength and modulus of elasticity in bending on composition of boards is apparent. Positive influence of secondary spruce chips on dimensional changes of cement-bonded particleboards caused by sudden changes of temperature and humidity was proved. Finely ground limestone contributes to more resistant structure of boards which leads to improved bending properties. Adverse conditions had more considerable influence on bending strength (decrease by 21% to 26%) than on modulus of elasticity in bending (decrease by 12% to 19%).

Global analysis of DEF damage to concretes with and without fly-ash

Delayed Ettringite formation (DEF) is an internal expansive reaction that can damage concrete. DEF is strongly influenced by the temperature, above about 60-65°C, and other factors involving cement chemistry especially, but also its physical characteristics. The exposure environment over time also promotes a condition to increase deterioration from DEF. Expansions results from secondary ettringite formation are progressive and can lead concrete to microcracking impacting its performance and durability over time. Several concrete structures are pointed to be severely attacked by DEF, and test method as well a better comprehension on this pathology is necessary to promote specific and proper preventive measures to avoid future damages. Furthermore, compared to alkali-silica reaction, DEF occurs more readily and aggressively, and sometimes prematurely, depending on several factors, such as type of cement, concrete mix design, exposure conditions, among others. This paper involves an overall analysis of the behavior of concretes with two types of Portland cements (High early-strength cement and a Portland pozzolanic cement, with fly-ash) in relation to DEF process. Several data from a laboratory study where DEF was induced through a specific thermal curing procedure are presented and discussed. The analyses involved the assessment of physical, mechanical, and expansive properties besides microstructural monitoring of samples from concretes over time. These experiments allowed detecting high values of expansions from DEF (up to 1.2%) in the concrete without fly ash. The mechanical properties were severely impacted from this deleterious process; as expansions increased, losses in the mechanic and elastic properties were verified. Expansion levels in the order of 0.5% prompted remarkably high reductions and, at about 1% the losses were relevant for both strengths (tensile and compressive) and modulus of elasticity, of 60% and 80%, respectively, in the presence of cement without fly-ash. Concrete microstructure has indicated massive formations of ettringite as well as micro-cracking and the fragility of the cement matrix because of DEF. On the other hand, expansion up to 0.2% did not promote important negative effects on the properties of concrete, especially with the pozzolanic cement tested. Furthermore, an overall approach with several correlations between physical and mechanical properties was taken to obtain different levels of deterioration for a concrete presenting DEF.