Single molecular precursor metal-organic chemical vapor deposition of MgAl2O4 thin films

1994 ◽  
Vol 9 (6) ◽  
pp. 1333-1336 ◽  
Author(s):  
Jiming Zhang ◽  
Gregory T. Stauf ◽  
Robin Gardiner ◽  
Peter Van Buskirk ◽  
John Steinbeck

MgAl2O4 films have been grown epitaxially on both Si(100) and MgO(100) by a novel single source metal-organic chemical vapor deposition (MOCVD) process. A single molecular source reagent [magnesium dialuminum isopropoxide, MgAl2(OC3H7)8] having the desired Mg: Al ratio was dissolved in a liquid solution and flash-vaporized into the reactor. Both thermal and plasma-enhanced MOCVD were used to grow epitaxial MgAl2O4 thin films. The Mg: Al ratio in the deposited films was the same as that of the starting compound (Mg: Al = 1:2) over a wide range of deposition conditions. The deposition temperature required for the formation of crystalline spinel was found to be significantly reduced and crystallinity was much improved on Si by using a remote plasma-enhanced MOCVD process. The epitaxial nature of the MgAl2O4 films was established by x-ray pole figure analysis.

2007 ◽  
Vol 515 (5) ◽  
pp. 2921-2925 ◽  
Author(s):  
Chunyu Wang ◽  
Volker Cimalla ◽  
Genady Cherkashinin ◽  
Henry Romanus ◽  
Majdeddin Ali ◽  
...  

2003 ◽  
Vol 42 (Part 1, No. 5A) ◽  
pp. 2839-2842 ◽  
Author(s):  
Jeong Hoon Park ◽  
Kug Sun Hong ◽  
Woon Jo Cho ◽  
Jang-Hoon Chung

1994 ◽  
Vol 9 (7) ◽  
pp. 1721-1727 ◽  
Author(s):  
Jie Si ◽  
Seshu B. Desu ◽  
Ching-Yi Tsai

Synthesis of zirconium tetramethylheptanedione [Zr(thd)4] was optimized. Purity of Zr(thd)4 was confirmed by melting point determination, carbon, and hydrogen elemental analysis and proton nuclear magnetic resonance spectrometer (NMR). By using Zr(thd)4, excellent quality ZrO2 thin films were successfully deposited on single-crystal silicon wafers by metal-organic chemical vapor deposition (MOCVD) at reduced pressures. For substrate temperatures below 530 °C, the film deposition rates were very small (⋚1 nm/min). The film deposition rates were significantly affected by (i) source temperature, (ii) substrate temperature, and (iii) total pressure. As-deposited films are carbon free. Furthermore, only the tetragonal ZrO2 phase was identified in as-deposited films. The tetragonal phase transformed progressively into the monoclinic phase as the films were subjected to a high-temperature post-deposition annealing. The optical properties of the ZrO2 thin films as a function of wavelength, in the range of 200 nm to 2000 nm, were also reported. In addition, a simplified theoretical model which considers only a surface reaction was used to analyze the deposition of ZrO2 films. The model predicated the deposition rates well for various conditions in the hot wall reactor.


2019 ◽  
Vol 114 (24) ◽  
pp. 241103 ◽  
Author(s):  
Caroline E. Reilly ◽  
Cory Lund ◽  
Shuji Nakamura ◽  
Umesh K. Mishra ◽  
Steven P. DenBaars ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document