Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis process

2000 ◽  
Vol 15 (11) ◽  
pp. 2499-2504 ◽  
Author(s):  
S. K. Mishra (Pathak) ◽  
S. Das ◽  
S. K. Das ◽  
P. Ramachandrarao
Keyword(s):  
High Temperature ◽  
Boron Oxide ◽  
Zirconium Dioxide ◽  
Fine Powder ◽  
Surface Oxidation ◽  
Synthesis Process ◽  
Sintering Behavior ◽  
Sintering Aids ◽  
Temperature Synthesis ◽  
High Temperature Synthesis

A detailed study on the sintering behavior of zirconium diboride powder produced by the self-propagating high-temperature synthesis (SHS) process was carried out in the temperature range of 1500–1800 °C. The fine powder prepared by the SHS process exhibited excellent sinterability and could be sintered at 1800 °C for 1 h to approximately 94% of the theoretical density. The apparent activation energy of densification in the range of 1500–1800 °C was estimated to be 248 ± 4 kJ mol−1. A zirconium dioxide layer formed on the surface of the sintered body and was attributed to boron oxide formation during sintering and concurrent surface oxidation by the oxygen generated from the reduction of boron oxide in the carbonaceous atmosphere. Sintering aids like Fe and Cr appeared to help in densification of ZrB2 powder.

scholarly journals High-Temperature Synthesis of Metal–Matrix Composites (Ni-Ti)-TiB2

2021 ◽  
Vol 11 (5) ◽  
pp. 2426
Author(s):  
Vladimir Promakhov ◽  
Alexey Matveev ◽  
Nikita Schulz ◽  
Mikhail Grigoriev ◽  
Andrey Olisov ◽  
...  
Keyword(s):  
High Temperature ◽  
Composite Materials ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Average Particle Size ◽  
Synthesis Process ◽  
Average Particle ◽  
Temperature Synthesis ◽  
High Temperature Synthesis

Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework of this article, the high-temperature synthesis of metal–matrix composite materials based on the (Ni-Ti)-TiB2 system was studied. The selected approaches make it possible to obtain composite materials of various compositions without contamination and with a high degree of energy efficiency during production processes. Combustion processes in the samples of a 63.5 wt.% NiB + 36.5 wt.% Ti mixture and the phase composition and structure of the synthesis products were researched. It has been established that the synthesis process in the samples proceeds via the spin combustion mechanism. It has been shown that self-propagating high-temperature synthesis (SHS) powder particles have a composite structure and consist of a Ni-Ti matrix and TiB2 reinforcement inclusions that are uniformly distributed inside it. The inclusion size lies in the range between 0.1 and 4 µm, and the average particle size is 0.57 µm. The obtained metal-matrix composite materials can be used in additive manufacturing technologies as ligatures for heat-resistant alloys, as well as for the synthesis of composites using traditional methods of powder metallurgy.

scholarly journals SHS robust modes to restore molybdenum by combustion wave in MoO3 – Al system

2020 ◽  
Vol 15 (4) ◽  
pp. 27-32
Author(s):  
Irina V. Milyukova ◽  
Marina P. Boronenko
Keyword(s):  
Spectral Analysis ◽  
High Temperature ◽  
Combustion Wave ◽  
Synthesis Process ◽  
Temperature Synthesis ◽  
Preliminary Heating ◽  
X Ray ◽  
Molybdenum Metal ◽  
High Temperature Synthesis ◽  
Oxide Phases

The work is devoted to the technology for the reduction of molybdenum from oxides by the method of self-propagating high-temperature synthesis in the MoO3 AI system with the addition of aluminum. The experiment was carried out in two modes: in a reactor at different pressures without preliminary heating and in a furnace in air until the initiation of the SH-synthesis process. Samples of molybdenum metal were obtained in different synthesis modes. X-ray phase and X-ray spectral analysis showed that molybdenum is the main phase in the synthesized samples. The presence of slag oxide phases Al2O3 and MoO2 was detected.

Immobilization of Radioactive Wastes into Perovskite Synrock by the SHS Method

2005 ◽  
Vol 475-479 ◽  
pp. 1627-1630 ◽  
Author(s):  
Rui Zhu Zhang ◽  
Zhi Meng Guo ◽  
Cheng Chang Jia ◽  
Guangfeng Lu
Keyword(s):  
High Temperature ◽  
Synthesis Process ◽  
Temperature Synthesis ◽  
Geological Disposal ◽  
Major Phase ◽  
Leach Rate ◽  
High Temperature Synthesis ◽  
Waste Loading ◽  
Shs Method

This paper researched the fabrication of perovskite synrock by self-propagating high temperature synthesis (SHS) and the characterization of the products. This synthesis process is simpler, the fabricated synrock can immobilize waste loading up to 35wt% SrO with satisfied physical properties (density>4.2g•cm-3, open porosity<0.2%, Leach rate<1.0 g•m-2•d-1). The structure analyses by XRD and SEM/EDS show that the major phase is perovskite which well agrees with the design. It proves that SHS offer a suitable Sr-waste synroc which is favorable for geological disposal.

Size control of tungsten powder synthesized by self-propagating high temperature synthesis process

1999 ◽  
Vol 34 (14-15) ◽  
pp. 2239-2245 ◽  
Author(s):  
Chang-Whan Won ◽  
Joong-Chai Jung ◽  
Seog-Gueon Ko ◽  
Jong-Hyeon Lee
Keyword(s):  
High Temperature ◽  
Tungsten Powder ◽  
Size Control ◽  
Synthesis Process ◽  
Temperature Synthesis ◽  
High Temperature Synthesis
Sign in / Sign up

Export Citation Format

Share Document