scholarly journals SHS robust modes to restore molybdenum by combustion wave in MoO3 – Al system

2020 ◽  
Vol 15 (4) ◽  
pp. 27-32
Author(s):  
Irina V. Milyukova ◽  
Marina P. Boronenko
Keyword(s):  
Spectral Analysis ◽  
High Temperature ◽  
Combustion Wave ◽  
Synthesis Process ◽  
Temperature Synthesis ◽  
Preliminary Heating ◽  
X Ray ◽  
Molybdenum Metal ◽  
High Temperature Synthesis ◽  
Oxide Phases

The work is devoted to the technology for the reduction of molybdenum from oxides by the method of self-propagating high-temperature synthesis in the MoO3 AI system with the addition of aluminum. The experiment was carried out in two modes: in a reactor at different pressures without preliminary heating and in a furnace in air until the initiation of the SH-synthesis process. Samples of molybdenum metal were obtained in different synthesis modes. X-ray phase and X-ray spectral analysis showed that molybdenum is the main phase in the synthesized samples. The presence of slag oxide phases Al2O3 and MoO2 was detected.

X-ray pulse method of examining the combustion wave in a self-propagating high-temperature synthesis

1991 ◽  
Vol 27 (3) ◽  
pp. 326-327
Author(s):  
A. P. Aleev ◽  
A. A. Kudryavtsev ◽  
V. M. Mal'tsev ◽  
V. M. Puchkov
Keyword(s):  
High Temperature ◽  
Combustion Wave ◽  
Pulse Method ◽  
Temperature Synthesis ◽  
X Ray ◽  
High Temperature Synthesis

Synthesis of Alumina-Tungsten Carbide Composites by Self-Propagating High Temperature Synthesis Process

2011 ◽  
Vol 415-417 ◽  
pp. 226-231
Author(s):  
Xin Wei
Keyword(s):  
High Temperature ◽  
Tungsten Carbide ◽  
Equilibrium Composition ◽  
Synthesis Process ◽  
X Ray Diffraction ◽  
Temperature Synthesis ◽  
Minimization Method ◽  
X Ray ◽  
High Temperature Synthesis ◽  
Microscope Technique

Alumina-Tungsten Carbide (Al2O3-WC) composites were synthesized by self-propagating high temperature synthesis (SHS) from a powder mixture of WO3-C-Al. The reaction was carried out in a SHS reactor under static argon gas at a pressure of 0.5 MPa. The standard Gibbs energy minimization method was used to calculate the equilibrium composition of the reacting species. The effects of carbon mole ratio in precursor mixture and diluents of NaCl and Al2O3 on the Al2O3-WC conversion were investigated using X-ray diffraction and scanning electron microscope technique. The as-synthesized products of Al2O3-WC2-WC powders were concurrently formed and the reduction of W2C phase was found when added diluents in precursors.

scholarly journals High-Temperature Synthesis of Metal–Matrix Composites (Ni-Ti)-TiB2

2021 ◽  
Vol 11 (5) ◽  
pp. 2426
Author(s):  
Vladimir Promakhov ◽  
Alexey Matveev ◽  
Nikita Schulz ◽  
Mikhail Grigoriev ◽  
Andrey Olisov ◽  
...  
Keyword(s):  
High Temperature ◽  
Composite Materials ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
Metal Matrix ◽  
Average Particle Size ◽  
Synthesis Process ◽  
Average Particle ◽  
Temperature Synthesis ◽  
High Temperature Synthesis

Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework of this article, the high-temperature synthesis of metal–matrix composite materials based on the (Ni-Ti)-TiB2 system was studied. The selected approaches make it possible to obtain composite materials of various compositions without contamination and with a high degree of energy efficiency during production processes. Combustion processes in the samples of a 63.5 wt.% NiB + 36.5 wt.% Ti mixture and the phase composition and structure of the synthesis products were researched. It has been established that the synthesis process in the samples proceeds via the spin combustion mechanism. It has been shown that self-propagating high-temperature synthesis (SHS) powder particles have a composite structure and consist of a Ni-Ti matrix and TiB2 reinforcement inclusions that are uniformly distributed inside it. The inclusion size lies in the range between 0.1 and 4 µm, and the average particle size is 0.57 µm. The obtained metal-matrix composite materials can be used in additive manufacturing technologies as ligatures for heat-resistant alloys, as well as for the synthesis of composites using traditional methods of powder metallurgy.

Immobilization of Radioactive Wastes into Perovskite Synrock by the SHS Method

2005 ◽  
Vol 475-479 ◽  
pp. 1627-1630 ◽  
Author(s):  
Rui Zhu Zhang ◽  
Zhi Meng Guo ◽  
Cheng Chang Jia ◽  
Guangfeng Lu
Keyword(s):  
High Temperature ◽  
Synthesis Process ◽  
Temperature Synthesis ◽  
Geological Disposal ◽  
Major Phase ◽  
Leach Rate ◽  
High Temperature Synthesis ◽  
Waste Loading ◽  
Shs Method

This paper researched the fabrication of perovskite synrock by self-propagating high temperature synthesis (SHS) and the characterization of the products. This synthesis process is simpler, the fabricated synrock can immobilize waste loading up to 35wt% SrO with satisfied physical properties (density>4.2g•cm-3, open porosity<0.2%, Leach rate<1.0 g•m-2•d-1). The structure analyses by XRD and SEM/EDS show that the major phase is perovskite which well agrees with the design. It proves that SHS offer a suitable Sr-waste synroc which is favorable for geological disposal.

Self-Propagating High-Temperature Synthesis of Si-SiC Composite Powder

2016 ◽  
Vol 675-676 ◽  
pp. 623-626 ◽  
Author(s):  
Tawat Chanadee ◽  
Sutham Niyomwas
Keyword(s):  
High Temperature ◽  
Composite Powder ◽  
Rice Husk Ash ◽  
Argon Atmosphere ◽  
Composite Powders ◽  
Temperature Synthesis ◽  
X Ray ◽  
High Temperature Synthesis ◽  
Silicon Silicon

Silicon-silicon carbide (Si-SiC) composite powders were synthesized by in-situ self- propagating high-temperature synthesis using rice husk ash (RHA)/carbon/Mg as precursors in argon atmosphere. The as-SHS powders were leached by two leaching steps. The microstructure and chemical composition of the obtained Si-SiC composite powders were examined using scanning electron microscope (SEM) and x-ray diffractometer (XRD), respectively.

A Study of Fe-Based Composite Coating Fabricated by the Self-Propagating High Temperature Synthesis

2012 ◽  
Vol 626 ◽  
pp. 138-142
Author(s):  
Saowanee Singsarothai ◽  
Vishnu Rachpech ◽  
Sutham Niyomwas
Keyword(s):  
High Temperature ◽  
Composite Coating ◽  
Steel Substrate ◽  
The Self ◽  
X Ray Diffraction ◽  
Temperature Synthesis ◽  
X Ray ◽  
High Temperature Synthesis ◽  
Precursor Powders ◽  
Scanning Electron

The steel substrate was coated by Fe-based composite using self-propagating high-temperature synthesis (SHS) reaction of reactant coating paste. The green paste was prepared by mixing precursor powders of Al, Fe2O3and Al2O3. It was coated on the steel substrate before igniting by oxy-acetylene flame. The effect of coating paste thickness and the additives on the resulted Fe-based composite coating was studied. The composite coating was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) couple with dispersive X-ray (EDS).

Sign in / Sign up

Export Citation Format

Share Document