Functionalizingλ-AlOOH Surface with Silanol -- an Ab-initio Study

2007 ◽  
Vol 1000 ◽  
Author(s):  
Petri Lehtinen ◽  
Guido Grundmeier ◽  
Alexander Blumenau
Keyword(s):  
Ab Initio ◽  
Adsorption Process ◽  
Water Environment ◽  
Water Molecules ◽  
Organic Film ◽  
Oh Groups ◽  
Inorganic Films ◽  
Adsorption Of Water ◽  
Zinc Coatings ◽  
Insight Into

AbstractOn HDG-steel, zinc coatings are used for corrosion protection. Part of that coating is composed of aluminum and this leads to the creation of aluminum oxide film on the coating with thicknesses of 2-3 nanometers. This layer is an amorphous boehmite film.Boehmite, or λ-AlOOH, has several application areas, but for us the interesting ones are related to an area where the surface is functionalized, for example in a way that the organic and inorganic films can be “glued” together. A good candidate for the interface is the silanol molecule. The idea is that the OH-groups of the molecule attach on the inorganic film and the methyl groups on the organic film and hence promote adhesion between the two.We present theoretical ab-initio results of adsorption of water and silanol molecules on the λ AlOOH (0001)-surface. Since the experimental adsorption of the silanol on the boehmite surface is done in water environment, the adsorption process is therefore a competing process. We will present some result of adsorption of silanol in the presence of water molecules to get an insight into this process.

Adsorption of water molecules on the surface of photo-catalyst: a first principles theoretical comparison between InVO4 and rutile TiO2

2002 ◽  
Vol 751 ◽  
Author(s):  
M. Oshikiri ◽  
M. Boero ◽  
J. Ye
Keyword(s):  
First Principles ◽  
Water Adsorption ◽  
Adsorption Process ◽  
Catalyst Surface ◽  
Chemical Reactivity ◽  
Water Molecules ◽  
Activation Energy Barrier ◽  
Reaction Proceeds ◽  
Adsorption Of Water ◽  
Dynamics Simulations

ABSTRACTThe adsorption process of water molecules on the surface of InVO4 has been investigated via first principles molecular dynamics simulations and compared with that of the well-known rutile TiO2. We have found that the surface of InVO4 shows a remarked chemical reactivity whenever comes in contact with water and H2O molecules are often adsorbed dissociatively on its surface. The reaction proceeds spontaneously in a way similar to the case of TiO2 and does not require the overcoming of an activation energy barrier. The peculiar atomic connectivity of the InVO4 bulk crystal structure and the changes at the catalyst surface induced by the water adsorption are discussed and compared with the TiO2 system.

scholarly journals Water Adsorption Properties of Free and Dehydrated β-Cyclodextrin Studied by near Infrared Spectroscopy and Gravimetry

2016 ◽  
Vol 689 ◽  
pp. 143-147 ◽  
Author(s):  
Alfred A. Christy
Keyword(s):  
Hydrogen Bonds ◽  
Infrared Spectra ◽  
Water Adsorption ◽  
Near Infrared ◽  
Adsorption Properties ◽  
Water Molecules ◽  
Hydroxyl Groups ◽  
Oh Groups ◽  
Near Infrared Spectra ◽  
Adsorption Of Water

β-cyclodextrin, like other carbohydrates has a tendency to adsorb water molecules and the properties are attributed to the hydroxyl groups in the molecules. β-cyclodextrin, the cyclic oligomer of glucose has a hydrophobic interior and hydrophilic exterior. The cyclic structure favours the formation of hydrogen bonds between the OH groups on the adjacent glucose units and affects the formation of hydrogen bonds with water molecules. The hydoxyl groups engaged in hydrogen bondings can be eliminated at high temperatures and the adsorption properties of the dehydrated β-cyclodextrin will depend on the new functional groups formed. The aim of the report is to discuss the issue of the water adsorption properties of free and dehydrated β-cyclodextrin. Dry β-cyclodextrin and dehydrated β-cyclodextrin at temperatures 250, 300 and 350 °C were allowed to adsorb water from a humidity controlled air environmennt and the evolving near infrared spectra were measured using a near infrared spectrometer equipped with a transflectance accessory. The near infrared spectra in the region 10,000-4000 cm-1 and their second and fourth derivative profiles were used in studying the variation in the adsorption characteristics of dehydrated β-cyclodextrin. The results of the analyses show that the adsorption of water by β-cyclodextrin decreses at 300 °C compared to 200 and 250 °C. Dehydration forms more of the ethereal type-O-bonds in the molecule and explains the decrease in the water molecular adsorption at higher dehydration temperatures.

Comparison of Water Adsorption Properties of Cellulose and Cellulose Nanocrystals Studied by Near-Infrared Spectroscopy and Gravimetry

2017 ◽  
Vol 735 ◽  
pp. 235-239 ◽  
Author(s):  
Thamonwan Angkuratipakorn ◽  
Jirada Singkhonrat ◽  
Alfred A. Christy
Keyword(s):  
Infrared Spectroscopy ◽  
Near Infrared Spectroscopy ◽  
Cellulose Nanocrystals ◽  
Water Adsorption ◽  
Near Infrared ◽  
Adsorption Properties ◽  
Water Molecules ◽  
Oh Groups ◽  
Adsorption Processes ◽  
Adsorption Of Water

The adsorption properties of water molecules on cellulose and cellulose nanocrystals (CNCs), isolated from defatted rice bran (DRB) by 55% sulfuric acid hydrolysis under sonication were investigated. The powdered samples of cellulose and CNCs were analysed by using near infrared spectroscopy (NIR) and gravimetry at 38% and 55% humidities. Small amounts of samples were dried under vacuum at 120°C and the NIR spectra of the dry samples and their spectra during the adsorption water molecules were measured by using an NIR spectrometer equipped with a transflectance accessory and a DTGS detector. The quantitative adsorption of water molecules by the samples was determined by gravimetry. Second and fourth derivative profiles of the NIR spectra were used in understanding the chemistry of adsorption of water molecules and the adsorption processes by the samples. The results show that the adsorption of water molecules by the cellulose samples gives rise to three prominent peaks that can be related to the water molecules engaged in hydrogen bonding with C2, C3 and C6-OH groups on the glucose units of the cellulose polymers. Furthermore, the cellulose nanocrystals adsorb twice as much of water as the cellulose polymer. It is also clear from the results that C2 and C3-OH groups in the glucose units adsorb water molecules at a faster rate than the C6-OH group and responsible for nearly 50% of the water adsorption.

scholarly journals Comparison of Water Adsorption Characteristics of Oligo and Polysaccharides of α-Glucose Studied by Near Infrared Spectroscopy

2014 ◽  
Vol 1035 ◽  
pp. 476-482 ◽  
Author(s):  
Alfred A. Christy
Keyword(s):  
Near Infrared ◽  
Adsorbed Water ◽  
Water Molecules ◽  
Hydrogen Bond Formation ◽  
Oh Groups ◽  
Adsorption Characteristics ◽  
Near Infrared Spectra ◽  
Adsorption Of Water ◽  
Ethereal Oxygen ◽  
Combination Frequencies

The adsorption properties of water molecules on oligo and polysaccharides are attributed to the OH groups of the glucose rings in the molecules. The water molecules are adsorbed onto OH groups by hydrogen bond formation. Near infrared spectroscopic and gravimetric techniques were used in analysing the adsorption characteristics of malto-oligosaccharides and some polysaccharides. Near infrared spectra of the dry oligo and polysaccharides were acquired during the adsorption of water molecules at a relative humidity of 50-55%. The amounts of water adsorbed by the samples were also recorded by an analytical balance. Second derivative techniques were used in decomposing the OH combination frequencies of the adsorbed water molecules in the region 5300-5000 cm -1.The results indicate that the water molecules are adsorbed on to C2 and C3-OH groups at a higher rate compared to the adsorption onto C1-OH groups in the molecules. Adsorption also takes place onto the ethereal oxygen atoms in the glucose rings in malto-oligosaccarides. The gravimetric results show that the adsorption of water molecules increases with the number of glucose units in the malto-oligosaccharides except maltotriose which has the highest adsorption over a period of 75 minutes. Furthermore, the adsorption characteristics of amylose and amylopectin are similar.

Quantum Mechanical Interpretation of the Ultra-Low Energy Methyl-Rotation Dynamics in Porous Metal-Organic Frameworks Probed by Low-Frequency Vibrational Spectroscopy and ab initio Simulations

2018 ◽  
Author(s):  
Qi Li ◽  
Adam J. Zaczek ◽  
Timothy M. Korter ◽  
J. Axel Zeitler ◽  
Michael T. Ruggiero
Keyword(s):  
Ab Initio ◽  
Metal Organic Frameworks ◽  
Low Frequency ◽  
Rotor Dynamics ◽  
Quantum Mechanical ◽  
Valuable Insight ◽  
Void Space ◽  
Ab Initio Simulations ◽  
Metal Organic ◽  
Insight Into

<div>Understanding the nature of the interatomic interactions present within the pores of metal-organic frameworks</div><div>is critical in order to design and utilize advanced materials</div><div>with desirable applications. In ZIF-8 and its cobalt analogue</div><div>ZIF-67, the imidazolate methyl-groups, which point directly</div><div>into the void space, have been shown to freely rotate - even</div><div>down to cryogenic temperatures. Using a combination of ex-</div><div>perimental terahertz time-domain spectroscopy, low-frequency</div><div>Raman spectroscopy, and state-of-the-art ab initio simulations,</div><div>the methyl-rotor dynamics in ZIF-8 and ZIF-67 are fully charac-</div><div>terized within the context of a quantum-mechanical hindered-</div><div>rotor model. The results lend insight into the fundamental</div><div>origins of the experimentally observed methyl-rotor dynamics,</div><div>and provide valuable insight into the nature of the weak inter-</div><div>actions present within this important class of materials.</div>

A First-Principles Computational Comparison of the Aqueous Anatase TiO2 (001) Interface and the Disordered, Fluorinated TiO2 Interface

2018 ◽  
Author(s):  
Kyle Reeves ◽  
Damien Dambournet ◽  
Christel Laberty-Robert ◽  
Rodolphe Vuilleumier ◽  
Mathieu Salanne
Keyword(s):  
Density Of States ◽  
Density Functional ◽  
Water Dissociation ◽  
Water Molecules ◽  
Chemical Doping ◽  
Charge Balance ◽  
Functional Theory ◽  
Adsorption Of Water ◽  
Properties Of Materials ◽  
Computational Comparison

Chemical doping and other surface modifications have been used to engineer the bulk properties of materials, but their influence on the surface structure and consequently the surface chemistry are often unknown. Previous work has been successful in fluorinating anatase TiO<sub>2</sub> with charge balance achieved via the introduction of Ti vacancies rather than the reduction of Ti. Our work here investigates the interface between this fluorinated titanate with cationic vacancies and a<br>monolayer of water via density functional theory based molecular dynamics. We compute the projected density of states for only those atoms at the interface and for those states that fall within 1eV of the Fermi energy for various steps throughout the simulation, and we determine that the<br>variation in this representation of the density of states serves as a reasonable tool to anticipate where surfaces are most likely to be reactive. In particular, we conclude that water dissociation at the surface is the main mechanism that influences the anatase (001) surface whereas the change in<br>the density of states at the surface of the fluorinated structure is influenced primarily through the adsorption of water molecules at the surface.

A First-Principles Computational Comparison of the Aqueous Anatase TiO2 (001) Interface and the Disordered, Fluorinated TiO2 Interface

2018 ◽  
Author(s):  
Kyle Reeves ◽  
Damien Dambournet ◽  
Christel Laberty-Robert ◽  
Rodolphe Vuilleumier ◽  
Mathieu Salanne
Keyword(s):  
Density Of States ◽  
Density Functional ◽  
Water Dissociation ◽  
Water Molecules ◽  
Chemical Doping ◽  
Charge Balance ◽  
Functional Theory ◽  
Adsorption Of Water ◽  
Properties Of Materials ◽  
Computational Comparison

Chemical doping and other surface modifications have been used to engineer the bulk properties of materials, but their influence on the surface structure and consequently the surface chemistry are often unknown. Previous work has been successful in fluorinating anatase TiO<sub>2</sub> with charge balance achieved via the introduction of Ti vacancies rather than the reduction of Ti. Our work here investigates the interface between this fluorinated titanate with cationic vacancies and a<br>monolayer of water via density functional theory based molecular dynamics. We compute the projected density of states for only those atoms at the interface and for those states that fall within 1eV of the Fermi energy for various steps throughout the simulation, and we determine that the<br>variation in this representation of the density of states serves as a reasonable tool to anticipate where surfaces are most likely to be reactive. In particular, we conclude that water dissociation at the surface is the main mechanism that influences the anatase (001) surface whereas the change in<br>the density of states at the surface of the fluorinated structure is influenced primarily through the adsorption of water molecules at the surface.

Sign in / Sign up

Export Citation Format

Share Document