Development of High Performance Silicon Nitride Ceramics and their Applications

1992 ◽  
Vol 287 ◽  
Author(s):  
Yo Tajima
Keyword(s):  
Mechanical Properties ◽  
Silicon Nitride ◽  
High Performance ◽  
Future Prospect ◽  
Cutting Tools ◽  
Sintering Process ◽  
Sintering Additives ◽  
Nitride Ceramics ◽  
Engine Components

ABSTRACTProgress in sintering process and improvement of mechanical properties of silicon nitride ceramics are reviewed. Emphases are placed on contributions of advanced sintering techniques and better understanding of sintering additives and microstructure-properties relations. Current applications as engine components and cutting tools are described, and future prospect is considered.

Effects of Sintering Additives on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics by GPS

2010 ◽  
Vol 105-106 ◽  
pp. 27-30 ◽  
Author(s):  
Wei Ru Zhang ◽  
Feng Sun ◽  
Ting Yan Tian ◽  
Xiang Hong Teng ◽  
Min Chao Ru ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Phase Transformation ◽  
Silicon Nitride ◽  
Porous Silicon ◽  
Flexural Strength ◽  
Relative Density ◽  
Sintering Additives ◽  
Microstructure And Mechanical Properties ◽  
Nitride Ceramics

Silicon nitride ceramics were prepared by gas pressure sintering (GPS) with different sintering additives, including La2O3, Sm2O3 and Al2O3. Effect of sintering additives on the phase-transformation, microstructure and mechanical properties of porous silicon nitride ceramics was investigated. The results show that the reaction of sintering additives each other and with SiO2 had key effects on the phase-transformation, grain growing and grain boundaries. With 9MPa N2 atmosphere pressure, holding 1h at 1850°C, adding 10wt% one of the La2O3, Sm2O3, Al2O3, porous silicon nitride was prepared and the relative density was 78%, 72%, 85% respectively. The flexural strength was less than 500MPa, and the fracture toughness was less than 4.8MPam1/2. Dropping compounds sintering additives, such as La2O3+Al2O3, Sm2O3+Al2O3 effectively improves the sintering and mechanical properties. The relative density was 99.2% and 98.7% with 10wt% compounds sintering additives. The grain ratio of length to diameter was up to 1:8. The flexural strength was more than 900MPa, and the fracture toughness was more than 8.9MPam1/2.

scholarly journals Influence of MXene (Ti3C2) Phase Addition on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5221
Author(s):  
Jaroslaw Wozniak ◽  
Mateusz Petrus ◽  
Tomasz Cygan ◽  
Artur Lachowski ◽  
Bogusława Adamczyk-Cieślak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Phase Transformation ◽  
Silicon Nitride ◽  
Powder Processing ◽  
Sintering Process ◽  
Microstructure And Mechanical Properties ◽  
Plasma Sintering ◽  
Nitride Ceramics ◽  
Spark Plasma

This paper discusses the influence of Ti3C2 (MXene) addition on silicon nitride and its impact on the microstructure and mechanical properties of the latter. Composites were prepared through powder processing and sintered using the spark plasma sintering (SPS) technic. Relative density, hardness and fracture toughness, were analyzed. The highest fracture toughness at 5.3 MPa·m1/2 and the highest hardness at HV5 2217 were achieved for 0.7 and 2 wt.% Ti3C2, respectively. Moreover, the formation of the Si2N2O phase was observed as a result of both the MXene addition and the preservation of the α-Si3N4→β-Si3N4 phase transformation during the sintering process.

Effect of α/β phase ratio on microstructure and mechanical properties of silicon nitride ceramics

2001 ◽  
Vol 16 (8) ◽  
pp. 2264-2270 ◽  
Author(s):  
Hirokazu Kawaoka ◽  
Tomohiko Adachi ◽  
Tohru Sekino ◽  
Yong-Ho Choa ◽  
Lian Gao ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Silicon Nitride ◽  
Phase Ratio ◽  
Phase Content ◽  
Sintering Process ◽  
Β Phase ◽  
Nitride Ceramics ◽  
Pulse Electric ◽  
Sintering Condition ◽  
Sintered Materials

Highly densed silicon nitride ceramics with various α/β phase ratios were produced by pulse electric current sintering process. The β-phase content of Si3N4 in sintered materials varied from 20 to 100 wt% depending on the sintering condition. The microstructure was observed by scanning electron microscopy and investigated by image analysis. Young's modulus, hardness, fracture toughness, and strength were strongly dependent on the α/β phase ratio. The fracture toughness increased from 4.6 MPa m1/2 for 20-wt% b-phase content to 8.2 MPa m1/2 for 95-wt% β-phase content, and the fracture strength showed a maximum value of about 1.6 GPa at 60-to-80-wt% β-phase content.

scholarly journals Synthesis of "in situ" reinforced silicon nitride composites

2004 ◽  
Vol 69 (1) ◽  
pp. 59-67 ◽  
Author(s):  
Aleksandra Vuckovic ◽  
Snezana Boskovic ◽  
Ljiljana Zivkovic
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Silicon Nitride ◽  
Pressureless Sintering ◽  
Sintering Additives ◽  
Sintering Time

The objective of this work was to investigate the effect of two different sintering additives (CeO2 and Y2O3 + Al2O3), sintering time and amount of ?-Si3N4 seeds on the densification, mechanical properties and microstructure of self-reinforced Si3N4 based composites obtained by pressureless sintering. Preparation of ?-Si3N4 seeds, also obtained by a pressureless sintering procedure, is described. Samples without seeds were prepared for comparison. The results imply that self-reinforced silicon nitride based composites with densities close to the theoretical values and with fracture toughness of 9.3MPa m1/2 can be obtained using a presureless sintering procedure.

Fabrication and mechanical properties of boron nitride nanotube reinforced silicon nitride ceramics

2018 ◽  
Vol 44 (6) ◽  
pp. 6456-6460 ◽  
Author(s):  
Tianfeng Li ◽  
Yongjun Chen ◽  
Wei Li ◽  
Jianbao Li ◽  
Lijie Luo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silicon Nitride ◽  
Boron Nitride ◽  
Boron Nitride Nanotube ◽  
Nitride Ceramics
Sign in / Sign up

Export Citation Format

Share Document