The Role of Coulombic Forces in Quasi-Two Dimensional Electrochemical Deposition

1996 ◽  
Vol 451 ◽  
Author(s):  
G. Marshall ◽  
P. Mocskos ◽  
F. Molina ◽  
S. Dengra
Keyword(s):  
Numerical Modeling ◽  
Pattern Formation ◽  
Electrochemical Deposition ◽  
Growth Pattern ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Dimensionless Numbers ◽  
Navier Stokes Equations

ABSTRACTRecent work demonstrates the relevant influence of convection during growth pattern formation in thin-layer electrochemical deposition. Convection is driven mainly by coulombic forces due to local charges at the tip of the aggregation and by buoyancy forces due to concentration gradients. Here we study through physical experiments and numerical modeling the regime under which coulombic forces are important. In the experimental measurements fluid motion near the growing tips of the deposit is visualized with neutrally buoyant latex spheres and its speed measured with videomicroscope tracking techniques and image processing software. The numerical modeling consists in the solution of the 2D dimensionless Nernst-Planck equations for ion concentrations, the Poisson equation for the electric field and the Navier-Stokes equations for the fluid flow, and a stochastic growth rule for ion deposition. A new set of dimensionless numbers governing electroconvection dominated flows is introduced. Preliminary experimental measurements and numerical results indicate that in the electroconvection dominated regime coulombic forces increase with the applied voltage, and their influence over growth pattern formation can be assessed with the magnitude of the dimensionless electric Froude number. It is suggested that when this number decreases the deposit morphology changes from fractal to dense branching.

Fluid motion inside a spinning nutating cylinder

1985 ◽  
Vol 150 ◽  
pp. 121-138 ◽  
Author(s):  
Harold R. Vaughn ◽  
William L. Oberkampf ◽  
Walter P. Wolfe
Keyword(s):  
Steady State ◽  
Finite Difference ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Navier Stokes Equations ◽  
Internal Fluid

The incompressible three-dimensional Navier–Stokes equations are solved numerically for a fluid-filled cylindrical cannister that is spinning and nutating. The motion of the cannister is characteristic of that experienced by spin-stabilized artillery projectiles. Equations for the internal fluid motion are derived in a non-inertial aeroballistic coordinate system. Steady-state numerical solutions are obtained by an iterative finite-difference procedure. Flow fields and liquid induced moments have been calculated for viscosities in the range of 0.9 × 104−1 × 109 cSt. The nature of the three-dimensional fluid motion inside the cylinder is discussed, and the moments generated by the fluid are explained. The calculated moments generally agree with experimental measurements.

A Growth Model For Ramified Electrochemical Deposition

1995 ◽  
Vol 407 ◽  
Author(s):  
Guillermo Marshall ◽  
Pablo Mocskos ◽  
Martin Olivella
Keyword(s):  
Growth Model ◽  
Electrochemical Deposition ◽  
Moving Boundary ◽  
Stokes Equations ◽  
Macroscopic Model ◽  
Navier Stokes ◽  
Discrete Version ◽  
Dimensionless Numbers ◽  
Navier Stokes Equations ◽  
Time Dependent Problem

ABSTRACTWe introduce a macroscopic model for the description of growth pattern formation in ramified electrochemical deposition. The theoretical model is formulated as a 2D time-dependent problem consisting in the Nernst-Planck equations for the concentration of the solute (cations and anions), coupled to a Poisson equation for the electrostatic potential and the Navier-Stokes equations for the solvent, with a moving boundary. A dimensional analysis is performed and a new set of dimensionless numbers governing the flow regime is derived. A 2D discrete version of these equations in a DBM scheme with a random moving boundary constitutes the computational model. We present numerical results which show that our growth model, with a proper variation of the set of dimensionless numbers, gives a reasonable picture of the interplay of the electroconvective, migration and diffusive motion of the ions near the growing tips.

Numerical Modeling of Evolution of Boundary Between Incompressible Gas and Liquid in Two-Dimensional Region

2006 ◽  
Vol 4 ◽  
pp. 224-236
Author(s):  
A.S. Topolnikov
Keyword(s):  
Numerical Modeling ◽  
Interphase Boundary ◽  
Incompressible Liquid ◽  
Stokes Equations ◽  
Numerical Code ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Incompressible Media ◽  
Good Agreement

The paper is devoted to numerical modeling of Navier–Stokes equations for incompressible media in the case, when there exist gas and liquid inside the rectangular calculation region, which are separated by interphase boundary. The set of equations for incompressible liquid accounting for viscous, gravitational and surface (capillary) forces is solved by finite-difference scheme on the spaced grid, for description of interphase boundary the ideology of Level Set Method is used. By developed numerical code the set of hydrodynamic problems is solved, which describe the motion of two-phase incompressible media with interphase boundary. As a result of numerical simulation the solutions are obtained, which are in good agreement with existing analytical and experimental solutions.

Numerical Integration of the Navier-Stokes Equations for a Disk Rotating in a Housing

1985 ◽  
Vol 40 (8) ◽  
pp. 789-799 ◽  
Author(s):  
A. F. Borghesani
Keyword(s):  
Boundary Layer ◽  
Cylindrical Cavity ◽  
Boundary Layer Thickness ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Rotating Disk ◽  
Infinite Medium ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Torque

The Navier-Stokes equations for the fluid motion induced by a disk rotating inside a cylindrical cavity have been integrated for several values of the boundary layer thickness d. The equivalence of such a device to a rotating disk immersed in an infinite medium has been shown in the limit as d → 0. From that solution and taking into account edge effect corrections an equation for the viscous torque acting on the disk has been derived, which depends only on d. Moreover, these results justify the use of a rotating disk to perform accurate viscosity measurements.

Numerical Modeling of Seabed Response to Combined Wave-Current Loading

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
J.-S. Zhang ◽  
Y. Zhang ◽  
C. Zhang ◽  
D.-S. Jeng
Keyword(s):  
Numerical Modeling ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Laboratory Measurements ◽  
Navier Stokes Equations ◽  
Closure Scheme ◽  
Waves And Currents ◽  
Current Interaction ◽  
Wave Maker ◽  
Current Loading

In this paper, a numerical model is developed to study the dynamic response of a porous seabed to combined wave-current loadings. While the Reynolds-averaged Navier–Stokes equations with k-ε turbulence closure scheme and internal wave-maker function are solved for the phenomenon of wave-current interaction, Biot's poro-elastic “u-p” model is adopted for the seabed response. After validated by the laboratory measurements, this model is applied for the investigation of the effects of waves and currents on the wave-current induced pore pressures. Furthermore, the effects of currents on maximum liquefaction depths of a porous seabed is examined, and it is concluded that the opposite currents will increase the liquefaction depth up to 30% of that without currents.

Investigation of the stability of boundary layers by a finite-difference model of the Navier—Stokes equations

1976 ◽  
Vol 78 (2) ◽  
pp. 355-383 ◽  
Author(s):  
H. Fasel
Keyword(s):  
Finite Difference ◽  
Stability Theory ◽  
Stokes Equations ◽  
Time Dependent ◽  
Linear Stability Theory ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Navier Stokes Equations ◽  
The Stability ◽  
Small Periodic

The stability of incompressible boundary-layer flows on a semi-infinite flat plate and the growth of disturbances in such flows are investigated by numerical integration of the complete Navier–;Stokes equations for laminar two-dimensional flows. Forced time-dependent disturbances are introduced into the flow field and the reaction of the flow to such disturbances is studied by directly solving the Navier–Stokes equations using a finite-difference method. An implicit finitedifference scheme was developed for the calculation of the extremely unsteady flow fields which arose from the forced time-dependent disturbances. The problem of the numerical stability of the method called for special attention in order to avoid possible distortions of the results caused by the interaction of unstable numerical oscillations with physically meaningful perturbations. A demonstration of the suitability of the numerical method for the investigation of stability and the initial growth of disturbances is presented for small periodic perturbations. For this particular case the numerical results can be compared with linear stability theory and experimental measurements. In this paper a number of numerical calculations for small periodic disturbances are discussed in detail. The results are generally in fairly close agreement with linear stability theory or experimental measurements.

TRIGGERING OF DETONATION PROCESSES IN PROPULSION CHAMBER

2021 ◽  
Vol 14 (2) ◽  
pp. 40-45
Author(s):  
D. V. VORONIN ◽  
Keyword(s):  
Thermal Conductivity ◽  
Numerical Modeling ◽  
Gas Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Chemically Reacting ◽  
Plane Disk ◽  
And Diffusion

The Navier-Stokes equations have been used for numerical modeling of chemically reacting gas flow in the propulsion chamber. The chamber represents an axially symmetrical plane disk. Fuel and oxidant were fed into the chamber separately at some angle to the inflow surface and not parallel one to another to ensure better mixing of species. The model is based on conservation laws of mass, momentum, and energy for nonsteady two-dimensional compressible gas flow in the case of axial symmetry. The processes of viscosity, thermal conductivity, turbulence, and diffusion of species have been taken into account. The possibility of detonation mode of combustion of the mixture in the chamber was numerically demonstrated. The detonation triggering depends on the values of angles between fuel and oxidizer jets. This type of the propulsion chamber is effective because of the absence of stagnation zones and good mixing of species before burning.

Pulsatile Waterhammer Subject to Laminar Friction

1972 ◽  
Vol 94 (2) ◽  
pp. 467-472 ◽  
Author(s):  
D. A. P. Jayasinghe ◽  
H. J. Leutheusser
Keyword(s):  
Stokes Equations ◽  
Fluid Motion ◽  
Present Theory ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
One Dimensional ◽  
Arbitrary Velocity ◽  
Velocity Input ◽  
Special Case ◽  
Signalling Problem

This paper deals with elastic waves which may be generated in a fluid by the sudden movement of a flow boundary. In particular, an analysis of the classical piston, or signalling problem is presented for the special case of arbitrary velocity input into a stationary fluid contained in a circular, semi-infinite waveguide. The decay of the pulse, as well as the resulting flow development in the inlet region of the pipe are analyzed by means of an asymptotic expansion of the suitably nondimensionalized Navier-Stokes equations for a compressible, nonheat-conducting Newtonian fluid. The results differ significantly from those of the more conventional one-dimensional approach based on the so-called telegrapher’s equation of mathematical physics. The present theory realistically predicts the growth of a boundary layer both in time and position and, hence, it appears to represent the transient fluid motion in a manner which is physically more appealing.

Расчетно-экспериментальное исследование влияния вдува/отсоса газа через перфорированную поверхность на пограничный слой при сверхзвуковом числе Маха

2021 ◽  
Vol 47 (21) ◽  
pp. 19
Author(s):  
П.А. Поливанов
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Stokes Equations ◽  
Numerical Data ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Navier Stokes Equations ◽  
Piv Method ◽  
Sst Turbulence Model ◽  
Method Analysis

In this paper a numerical and experimental study of the effect of blowing/suction through a perforated surface on a turbulent boundary layer at a Mach number M = 1.4 is carried out. Most of the calculations were performed by Reynolds-averaged Navier-Stokes equations with the k-w SST turbulence model. The calculated geometry completely repeated the experimental one including the perforated surface. The numerical data were compared with experimental measurements obtained by the PIV method. Analysis of the data made it possible to find the limits of applicability of the numerical method for this flow.

An investigation on the instability of a flexible liquid-filled rotor

2019 ◽  
Vol 234 (2) ◽  
pp. 165-172
Author(s):  
Guangding Wang ◽  
Huiqun Yuan ◽  
Hongyun Sun
Keyword(s):  
Stokes Equations ◽  
Fluid Motion ◽  
Coupling Model ◽  
Frequency Equation ◽  
Rotor System ◽  
System Stability ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Continuity Equations ◽  
The Stability

In this paper, the stability of a flexible rotor partially filled with liquid is investigated. On the basis of the Navier-Stokes equations for the incompressible flow, a two-dimensional analytical model is developed for fluid motion. Applying the perturbation method, the linearized Navier-Stokes and continuity equations of fluid particles are obtained. Using the boundary conditions of fluid motion, the fluid forces exerted on the rotor are calculated. According to the established fluid-structure coupling model of the rotor system, the whirling frequency equation, which is applied to determine the stability of the system, is derived. The analysis results of the system stability are compared with the theoretical ones reported in the previous study. Good agreement is shown between the results of the present analysis and the literature results. The influences of the main parameters on the dynamic stability of the rotor system are discussed.

Sign in / Sign up

Export Citation Format

Share Document