First Principles Calculations to Describe Zirconia Pseudopolymorphs

1997 ◽  
Vol 492 ◽  
Author(s):  
G. Jomard ◽  
T. Petit ◽  
L. Magaud ◽  
A. Pasturel
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Oxygen Vacancies ◽  
Local Density ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Pseudopotential Theory ◽  
Structural And Electronic Properties ◽  
Gradient Corrections ◽  
Made In

ABSTRACTThe structural and electronic properties of four different structures of zirconia (ZrO2) are studied using ab initio total energy calculations. The calculations are made in the framework of density functional (DFT) and pseudopotential theory. We compare results given within the LDA (Local Density Approximation) and including Generalized Gradient Corrections (GGCs) in the Perdew Wang and Perdew Becke formalisms. We present results for pure and defective zirconia (oxygen vacancies and Zr substitution by Fe) showing the effects of such point defects on tne relative structural stabilities of the different pseudopolymorphs.

Structural, elastic and thermodynamic properties of A15-type compounds V3X (X = Ir, Pt and Au) from first-principles calculations

2016 ◽  
Vol 30 (35) ◽  
pp. 1650414 ◽  
Author(s):  
Mingliang Wang ◽  
Zhe Chen ◽  
Dong Chen ◽  
Cunjuan Xia ◽  
Yi Wu
Keyword(s):  
Thermodynamic Properties ◽  
Debye Temperature ◽  
First Principles ◽  
Density Functional ◽  
Coefficient Of Thermal Expansion ◽  
Local Density ◽  
Debye Model ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Experimental Values

The structural, elastic and thermodynamic properties of the A15 structure V3Ir, V3Pt and V3Au were studied using first-principles calculations based on the density functional theory (DFT) within generalized gradient approximation (GGA) and local density approximation (LDA) methods. The results have shown that both GGA and LDA methods can process the structural optimization in good agreement with the available experimental parameters in the compounds. Furthermore, the elastic properties and Debye temperatures estimated by LDA method are typically larger than the GGA methods. However, the GGA methods can make better prediction with the experimental values of Debye temperature in V3Ir, V3Pt and V3Au, signifying the precision of the calculating work. Based on the E–V data derived from the GGA method, the variations of the Debye temperature, coefficient of thermal expansion and heat capacity under pressure ranging from 0 GPa to 50 GPa and at temperature ranging from 0 K to 1500 K were obtained and analyzed for all compounds using the quasi-harmonic Debye model.

scholarly journals Structural and Electronic Properties of Orthorhombic Phase Bi2Se3 Based On First-Principles Study

2019 ◽  
Vol 16 (2) ◽  
pp. 77 ◽  
Author(s):  
Muhammad Zamir Mohyedin ◽  
Afiq Radzwan ◽  
Mohammad Fariz Mohamad Taib ◽  
Rosnah Zakaria ◽  
Nor Kartini Jaafar ◽  
...  
Keyword(s):  
Electronic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Computer Code ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Exchange Correlation ◽  
Percentage Difference ◽  
Structural And Electronic Properties

Bi2Se3 is one of the promising materials in thermoelectric devices and very useful out of environmental concern due to its efficiency to perform at room temperature. Based on the first-principles calculation of density functional theory (DFT) by using CASTEP computer code, structural and electronic properties of Bi2Se3 were investigated. The calculation is conducted within the exchange-correlation of local density approximation (LDA) and generalized gradient approximation within the revision of Perdew-Burke-Ernzerhof (GGA-PBE) functional. It was found that the results are consistent with previous works of theoretical study with small percentage difference. LDA exchange-correlation functional method is more accurate and have a better agreement than GGA-PBE to describe the structural properties of Bi2Se3 which consist of lattice parameters. LDA functional also shown more accurate electronic structure of Bi2Se3 that consist of band structure and density of states (DOS) which consistent with most previous theoretical works with small percentage difference. This study proves the reliability of CASTEP computer code and show LDA exchange-correlation functional is more accurate in describing the nature of Bi2Se3 compared to the other functionals.

Electronic, Optical and Vibrational Properties of B3N3H6 from First-Principles Calculations

2021 ◽  
Author(s):  
Yun-Dan Gan ◽  
Han Qin ◽  
Fu-Sheng Liu ◽  
Zheng-Tang Liu ◽  
Cheng lu Jiang ◽  
...  
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Vibrational Properties ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Conductivity Loss ◽  
Good Agreement

Abstract The electronic, optical and vibrational properties of B3N3H6 have been calculated by means of first-principles density functional theory (DFT) calculations within the generalized gradient approximation (GGA) and the local density approximation (LDA). The calculated structural parameters of B3N3H6 are in good agreement with experimental work. With the band structure and density of states (DOS), we have analyzed the optical properties including the complex dielectric function, refractive index, absorption, conductivity, loss function and reflectivity. By the contrast, it is found that on the (001) component and (100) component have obvious optical anisotropy. Moreover, the vibrational properties have been obtained and analyzed.

Electronic structure of cubic BaTbO3 from first-principles pseudopotential calculations

2006 ◽  
Vol 84 (2) ◽  
pp. 115-120 ◽  
Author(s):  
G Y Gao ◽  
K L Yao ◽  
Z L Liu
Keyword(s):  
Electronic Structure ◽  
First Principles ◽  
Density Functional ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Exchange Correlation ◽  
Pseudopotential Calculations ◽  
Correlation Potential ◽  
Density Contour

First-principles calculations of the electronic structure are performed for cubic BaTbO3 using the plane-wave pseudopotential method within the framework of density functional theory and using the generalized gradient approximation for the exchange-correlation potential. Our calculations show that cubic BaTbO3 is metallic, and that this metallic character is mainly governed by the Tb 4f electrons and the hybridization between the Tb 5d and O 2p states. From the analysis of the density of states, band structure, and charge density contour, we find that the chemical bonding between Tb and O is covalent while that between Ba and TbO3 is ionic. PACS Nos.: 71.15.Mb, 71.20.-b

First-Principles Investigation on Elastic Constants of TiN under High Pressure

2013 ◽  
Vol 802 ◽  
pp. 109-113
Author(s):  
Kittiya Prasert ◽  
Pitiporn Thanomngam ◽  
Kanoknan Sarasamak
Keyword(s):  
Elastic Constants ◽  
First Principles ◽  
Local Density ◽  
Ambient Pressure ◽  
Lattice Parameter ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Generalized Gradient Approximation ◽  
Shear Distortion ◽  
Calculated Lattice Parameter

Elastic constants of NaCl-type TiN under pressure were investigated by first-principles calculations within both local density approximation (LDA) and Perdew-Burke-Ernzerhof generalized-gradient approximation (PBE-GGA). At ambient pressure, the calculated lattice parameter, bulk modulus, and elastic constants of NaCl-type TiN are in well agreement with other available values. Under pressure, all elastic constants,C11,C12, andC44, are found to increase with pressure.C11, which is related to the longitudinal distortion, increases rapidly with pressure whileC12andC44which are related to the transverse and shear distortion, respectively, are much less sensitive to pressure.

First Principles Calculations for Metal/Ceramic Interfaces

1994 ◽  
Vol 357 ◽  
Author(s):  
M. W. Finnis ◽  
C. Kruse ◽  
U. SchÖnberger
Keyword(s):  
Electronic Structure ◽  
High Resolution ◽  
Ab Initio ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Work Of Adhesion ◽  
First Principles Calculations ◽  
Resolution Electron ◽  
Metal Ceramic

AbstractWe discuss the recent first principles calculations of the properties of interfaces between metals and oxides. This type of calculation is parameter-free, and exploits the density functional theory in the local density approximation to obtain the electronic structure of the system. At the same time the equilibrium atomic structure is sought, which minimises the excess energy of the interface. Up to now calculations of this type have been made for a few model interfaces which are atomically coherent, that is with commensurate lattices. Examples are Ag/MgO and Nb/Al2O3. In these cases it has been possible to predict the structures observed by high resolution electron microscopy. The calculations are actually made in a supercell geometry, in which there are alternating nanolayers of metal and ceramic. Because of the effectiveness of metallic screening in particular, the interfaces between the nanolayers do not interfere much with each other.Besides the electronic structure of the interface, such calculations have provided values of the ideal work of adhesion. Electrostatic image forces in conjunction with the elementary ionic model provide a simple framework for understanding the results.An important role of such calculations is to develop intuition about the nature of the bonding, including the effects of charge transfer, which has formerly only been described in an empirical way. It may then be possible to build atomistic models of the metal/ceramic interaction which have a sound physical basis and can be calibrated against ab initio results. Simpler models are necessary if larger systems, including misfit dislocations and other defects, are to be simulated, with a view to understanding the atomic processes of growth and failure. Another area in which ab initio calculations can be expected to contribute is in the chemistry of impurity segregation and its effect at interfaces. Such theoretical tools are a natural partner to the experimental technique of high resolution electron energy loss spectroscopy for studying the local chemical environment at an interface.

THEORETICAL INVESTIGATION OF THE ELASTIC PROPERTIES AND LATTICE DYNAMICS OF THE MgSxSe1-x ALLOY

2007 ◽  
Vol 21 (05) ◽  
pp. 249-259 ◽  
Author(s):  
K. BOUAMAMA ◽  
P. DJEMIA
Keyword(s):  
Elastic Properties ◽  
First Principles ◽  
Lattice Dynamics ◽  
Density Functional ◽  
Local Density ◽  
Lattice Parameter ◽  
First Principles Calculations ◽  
Virtual Crystal Approximation ◽  
Functional Theory ◽  
Density Functional Perturbation Theory

Structural and elastic properties as well as lattice dynamics of ternary MgS x Se 1-x alloy have been studied using first-principles calculations. These are done using density functional theory (DFT) and density functional perturbation theory (DFPT) within the local density approximation (LDA) and employing the virtual-crystal approximation (VCA). We found that the lattice parameter, the elastic constants and the phonon frequencies follow a quadratic law in x.

First-principles Calculations of Energetic Properties of Vacancies, Mn-atomic Defects in CdTe

2006 ◽  
Vol 959 ◽  
Author(s):  
Ghouti Merad ◽  
Benali Rerbal ◽  
Hafid Aourag ◽  
Joël Cibert
Keyword(s):  
Density Functional Theory ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Density Approximation ◽  
First Principles Calculations ◽  
Functional Theory ◽  
Energetic Properties ◽  
Atomistic Modelling ◽  
Atomic Type

ABSTRACTAn atomistic modelling based on density functional theory within the framework of the local density approximation is used to show the trends in the energetic properties of single and double defects in CdTe semiconductor, without phase transformation. A systematic study of vacancies, Mn substituting Cd atoms in a supercell structure consisting of 16-atoms is presented. The changes of structural properties and lattice parameters due to the addition of Mn-atomic type defects in CdTe matrix are compared, and the number of vacancies is also determined from the total energy calculations.

Theoretical Study of Atoms Filled in Carbon Nanotubes

2016 ◽  
Vol 13 (10) ◽  
pp. 6974-6977
Author(s):  
Shuwen Cui ◽  
Weiwei Liu ◽  
Xiaosong Wang
Keyword(s):  
Carbon Nanotubes ◽  
First Principles ◽  
Density Functional ◽  
Theoretical Study ◽  
Local Density ◽  
First Principles Calculations ◽  
Functional Theory ◽  
One Dimensional ◽  
Local Density Functional Theory ◽  
Foreign Materials

The nano-sized quasi-one dimensional hollow cores of carbon nanotubes make it possible for them to be filled with and wetted by foreign materials. With C, S and Se atoms as example, we have studied the filling and wetting of these atoms into carbon nanotubes from local density functional theory in first principles calculations. The results suggest that the effect of nanotube length is negligible when it exceeds 3.6 Å, there is a relation between nanotube diameter and filling and wetting. Our studies would be important implications for the further use of carbon nanotubes.

scholarly journals Introduction to first-principles electronic structure methods: Application to actinide materials

2006 ◽  
Vol 21 (12) ◽  
pp. 2979-2985 ◽  
Author(s):  
John E. Klepeis
Keyword(s):  
Electronic Structure ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Background Information ◽  
Quantum Molecular Dynamics ◽  
Generalized Gradient ◽  
Sufficient Detail ◽  
Current Controversy ◽  
Electronic Structure Methods

This paper provides an introduction for non-experts to first-principles electronic structure methods that are widely used in condensed-matter physics. Particular emphasis is placed on giving the appropriate background information needed to better appreciate the use of these methods to study actinide and other materials. Specifically, the underlying theory is described in sufficient detail to enable an understanding of the relative strengths and weaknesses of the methods. In addition, the meaning of commonly used terminology is explained, including density functional theory (DFT), local density approximation (LDA), and generalized gradient approximation (GGA), as well as linear muffin-tin orbital (LMTO), linear augmented plane wave (LAPW), and pseudopotential methods. Methodologies that extend the basic theory to address specific limitations are also briefly discussed. Finally, a few illustrative applications are presented, including quantum molecular dynamics (QMD) simulations and studies of surfaces, impurities, and defects. The paper concludes by addressing the current controversy regarding magnetic calculations for actinide materials.

Sign in / Sign up

Export Citation Format

Share Document