Efficient blue-green molecular organic light emitting diodes based on novel silole derivatives

2002 ◽  
Vol 725 ◽  
Author(s):  
Leonidas C. Palilis ◽  
Hideyuki Murata ◽  
Antti J. Mäkinen ◽  
Manabu Uchida ◽  
Zakya H. Kafafia

AbstractWe report on highly efficient molecular organic light-emitting diodes (MOLEDs) using two novel silole derivatives as emissive and electron transport materials. A silole derivative, namely 2,5-di-(3-biphenyl)-1,1-dimethyl-3,4-diphenylsilacyclopentadiene (PPSPP), which shows blue fluorescence with a high photoluminescence quantum yield of 85% in the solid state, was used as the emissive material. Another silole derivative, namely 2,5-bis-(2‘2“-bipyridin-6-yl)-1,1- dimethyl-3,4-diphenylsilacyclopentadiene (PyPySPyPy), that exhibits a non-dispersive high electron mobility of 2x10-4 cm2/Vsec was used as the electron transport material. MOLEDs using these two siloles and a common hole transport material show blue-green emission centered at 495 nm. This red-shifted electroluminescence (EL) band relative to the blue fluorescence of PPSPP is assigned to a PPSPP:NPB exciplex. A low operating voltage of 4.5 V was measured at a luminance of 100 cd/m2 and an EL quantum efficiency of 3.4% was achieved at 100 A/m2. To our knowledge, this is the highest EL quantum efficiency ever reported based on exciplex emission.

2014 ◽  
Vol 105 (11) ◽  
pp. 113303 ◽  
Author(s):  
Caroline Murawski ◽  
Cornelius Fuchs ◽  
Simone Hofmann ◽  
Karl Leo ◽  
Malte C. Gather

2020 ◽  
Vol 8 (5) ◽  
pp. 1697-1703 ◽  
Author(s):  
Chang Yoon Yang ◽  
Sunwoo Kang ◽  
Hyein Jeong ◽  
Ho Jin Jang ◽  
Yoonkyoo Lee ◽  
...  

Key parameters of the host for long lifetimes in phosphorescent organic light-emitting diodes were investigated by synthesizing three isomeric hosts with a carbazolylcarbazole hole transport moiety and a benzonitrile electron transport moiety.


2018 ◽  
Vol 6 (38) ◽  
pp. 10308-10314 ◽  
Author(s):  
Su Kyeong Shin ◽  
Si Hyun Han ◽  
Jun Yeob Lee

High triplet energy exciplexes which can improve the lifetime of blue phosphorescent organic light-emitting diodes were developed by mixing a carbazole based hole transport type host with a CN modified carbazole based electron transport type host.


Micromachines ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 344 ◽  
Author(s):  
Neng Liu ◽  
Sijiong Mei ◽  
Dongwei Sun ◽  
Wuxing Shi ◽  
Jiahuan Feng ◽  
...  

High efficiency blue fluorescent organic light-emitting diodes (OLEDs), based on 1,3-bis(carbazol-9-yl)benzene (mCP) doped with 4,4’-bis(9-ethyl-3-carbazovinylene)-1,1’-biphenyl (BCzVBi), were fabricated using four different hole transport layers (HTLs) and two different electron transport layers (ETLs). Fixing the electron transport material TPBi, four hole transport materials, including 1,1-Bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC), N,N’-Di(1-naphthyl)-N,N’-diphenyl-(1,1’-biphenyl)-4’-diamine(NPB), 4,4’-Bis(N-carbazolyl)-1,1,-biphenyl (CBP) and molybdenum trioxide (MoO3), were selected to be HTLs, and the blue OLED with TAPC HTL exhibited a maximum luminance of 2955 cd/m2 and current efficiency (CE) of 5.75 cd/A at 50 mA/cm2, which are 68% and 62% higher, respectively, than those of the minimum values found in the device with MoO3 HTL. Fixing the hole transport material TAPC, the replacement of TPBi ETL with Bphen ETL can further improve the performance of the device, in which the maximum luminance can reach 3640 cd/m2 at 50 mA/cm2, which is 23% higher than that of the TPBi device. Furthermore, the lifetime of the device is also optimized by the change of ETL. These results indicate that the carrier mobility of transport materials and energy level alignment of different functional layers play important roles in the performance of the blue OLEDs. The findings suggest that selecting well-matched electron and hole transport materials is essential and beneficial for the device engineering of high-efficiency blue OLEDs.


2011 ◽  
Vol 287-290 ◽  
pp. 3051-3055
Author(s):  
Yu Sheng Tsai ◽  
Lin Ann Hong ◽  
Fuh Shyang Juang ◽  
Kuang Chih Lai ◽  
Chang Jun Lai ◽  
...  

White phosphorescent organic light-emitting diodes (WPHOLED) with high efficiency and low driving voltage were achieved by incorporating an electron transport material (3TPYMB) into a hole transport-type host (TCTA) as a mixed-host structure. For electrons, the emitting layer is nearly barrier-free until they reach the region of exciton formation, which keeps the driving voltage low. Therefore, improved the charge carrier balance within the emitting layer and enhanced the power efficiency of device. White PHOLED at a luminance of 1000 cd/m2 shown a driving voltage of 4.38 V, luminance efficiency of 36.1 cd/A, and power efficiency of 26.4 lm/W was observed. Furthermore, the power efficiency can be improved to 34.27 lm/W, and luminance efficiency to 46.7 cd/A by attaching a brightness enhancement film (BEF).


Sign in / Sign up

Export Citation Format

Share Document