Further Investigation and Application of the Principle of Correspondence Between Elastic and Piezoelectric Problems

2002 ◽  
Vol 731 ◽  
Author(s):  
Edgar Karapetian ◽  
Larissa Gorbatikh

AbstractIn the present work, the recently established principle of correspondence between the elastic and the piezoelectric problems for the transversely isotropic materials has been applied to obtain the solution of the problem of interaction of two tangential forces and a penny-shaped crack. The problem under consideration is described as follows: a penny-shaped crack in the unbounded piezoelectric medium is interacting with two tangential forces of the same magnitude acting in the same direction and applied arbitrarily but symmetrically with respect to the crack plane, which is a plane of isotropy. Some further investigation of the principle of correspondence is made and the important limiting conditions are stated.

2006 ◽  
Vol 312 ◽  
pp. 41-46 ◽  
Author(s):  
Bao Lin Wang ◽  
Yiu Wing Mai

This paper solves the penny-shaped crack configuration in transversely isotropic solids with coupled magneto-electro-elastic properties. The crack plane is coincident with the plane of symmetry such that the resulting elastic, electric and magnetic fields are axially symmetric. The mechanical, electrical and magnetical loads are considered separately. Closed-form expressions for the stresses, electric displacements, and magnetic inductions near the crack frontier are given.


1983 ◽  
Vol 50 (1) ◽  
pp. 24-28 ◽  
Author(s):  
Y. M. Tsai

The thermal stress problem for a penny-shaped crack contained in a transversely isotropic medium is investigated using the techniques of Hankel transforms and double integrations. Symmetrical thermal loadings are applied over the crack surfaces. For constant temperature and heat flux over the crack surfaces, expressions for the crack shapes and the thermal stresses in the crack plane are obtained in closed forms. The stress intensity factors are also obtained and shown to be dependent on the material properties.


2021 ◽  
Vol 153 ◽  
pp. 103665
Author(s):  
K. Du ◽  
L. Cheng ◽  
J.F. Barthélémy ◽  
I. Sevostianov ◽  
A. Giraud ◽  
...  

2001 ◽  
Vol 20 (6) ◽  
pp. 997-1005 ◽  
Author(s):  
Bao-Lin Wang ◽  
Naotake Noda ◽  
Jie-Cai Han ◽  
Shan-Yi Du

1984 ◽  
Vol 51 (4) ◽  
pp. 811-815 ◽  
Author(s):  
Y. M. Tsai

The stress distribution produced by the identation of a penny-shaped crack by an oblate smooth spheroidal rigid inclusion in a transversely isotropic medium is investigated using the method of Hankel transforms. This three-part mixed boundary value problem is solved using the techniques of triple integral equations. The normal contact stress between the crack surface and the indenter is written as the product of the associated half-space contact stress and a nondimensional crack-effect correction function. An exact expression for the stress-intensity is obtained as the product of a dimensional quantity and a nondimensional function. The curves for these nondimensional functions are presented and used to determine the values of the normalized stress-intensity factor and the normalized maximum contact stress. The stress-intensity factor is shown to be dependent on the material constants and increasing with increasing indentation. The stress-intensity factor also increases if the radius of curvature of the indenter surface increases.


Sign in / Sign up

Export Citation Format

Share Document