scholarly journals CFD simulation on wind turbine blades with leading edge erosion

Author(s):  
Yan Wang ◽  
Liang Wang ◽  
Chenglin Duan ◽  
Jian Zheng ◽  
Zhe Liu ◽  
...  
2018 ◽  
Vol 12 (12) ◽  
pp. 80
Author(s):  
Sutrisno . ◽  
Setyawan Bekti Wibowo ◽  
Sigit Iswahyudi

This paper studies the CFD simulation of forward three-dimensional (3-D) horizontal axis wind turbine (HAWT) blades. Using logarithmic grid and Q-criterion to learn the vortex dynamics around the blades at low rotational speed. The computational fluid dynamics (CFD) simulation uses Q-criterion to probe vortices and logarithmic grid to emphasize the micro-gridding effect of the turbulent boundary layer. The visualization & measurement of the simulation results give the coefficient of pressure (Cp). For forward 3-D wind turbine blade, at low rotational speed, the strongly accelerated laminar region surrounds the lower blade, and the decelerated tip blade region coalesce each other give rise to a reverse limiting streamline, eroding the laminar region further until a little is left on the tip of the blade. The "reverse limiting streamline" grows inward radially, the area is narrowing closing to the leading edge of the blade tip. The second side of the rolled-up vortex appears the velocity ratio (Uc/Ulocal) of the second vortices are higher than the main vortex cores. For radius R=1.547 m, U=12 m/s, at 210 RPM, CL and CD values reach a maximum with fully laminar tip conditions. While at 120 RPM, the CL and CD values reach a minimum in the absence of laminar tips. The results show the detailed vortex dynamic pattern surround the blades, give more understanding to design laminar 3-D blade toward a noiseless wind turbine system.


2021 ◽  
Vol 169 ◽  
pp. 953-969
Author(s):  
Leon Mishnaevsky ◽  
Charlotte Bay Hasager ◽  
Christian Bak ◽  
Anna-Maria Tilg ◽  
Jakob I. Bech ◽  
...  

2021 ◽  
pp. 0309524X2110071
Author(s):  
Usman Butt ◽  
Shafqat Hussain ◽  
Stephan Schacht ◽  
Uwe Ritschel

Experimental investigations of wind turbine blades having NACA airfoils 0021 and 4412 with and without tubercles on the leading edge have been performed in a wind tunnel. It was found that the lift coefficient of the airfoil 0021 with tubercles was higher at Re = 1.2×105 and 1.69×105 in post critical region (at higher angle of attach) than airfoils without tubercles but this difference relatively diminished at higher Reynolds numbers and beyond indicating that there is no effect on the lift coefficients of airfoils with tubercles at higher Reynolds numbers whereas drag coefficient remains unchanged. It is noted that at Re = 1.69×105, the lift coefficient of airfoil without tubercles drops from 0.96 to 0.42 as the angle of attack increases from 15° to 20° which is about 56% and the corresponding values of lift coefficient for airfoil with tubercles are 0.86 and 0.7 at respective angles with18% drop.


2018 ◽  
Vol 72 ◽  
pp. 01007 ◽  
Author(s):  
Faizan Afzal ◽  
Muhammad S. Virk

This paper describes a brief overview of main issues related to atmospheric ice accretion on wind turbines installed in cold climate region. Icing has significant effects on wind turbine performance particularly from aerodynamic and structural integrity perspective, as ice accumulates mainly on the leading edge of the blades that change its aerodynamic profile shape and effects its structural dynamics due to added mass effects of ice. This research aims to provide an overview and develop further understanding of the effects of atmospheric ice accretion on wind turbine blades. One of the operational challenges of the wind turbine blade operation in icing condition is also to overcome the process of ice shedding, which may happen due to vibrations or bending of the blades. Ice shedding is dangerous phenomenon, hazardous for equipment and personnel in the immediate area.


2020 ◽  
Vol 5 (3) ◽  
pp. 977-981 ◽  
Author(s):  
Anna-Maria Tilg ◽  
Charlotte Bay Hasager ◽  
Hans-Jürgen Kirtzel ◽  
Poul Hummelshøj

Abstract. Leading-edge erosion (LEE) of wind turbine blades is caused by the impact of hydrometeors, which appear in a solid or liquid phase. A reduction in the wind turbine blades' tip speed during defined precipitation events can mitigate LEE. To apply such an erosion-safe mode, a precipitation nowcast is required. Theoretical considerations indicate that the time a raindrop needs to fall to the ground is sufficient to reduce the tip speed. Furthermore, it is described that a compact, vertically pointing radar that measures rain at different heights with a sufficiently high spatio-temporal resolution can nowcast rain for an erosion-safe mode.


Sign in / Sign up

Export Citation Format

Share Document