scholarly journals Brief communication: Nowcasting of precipitation for leading-edge-erosion-safe mode

2020 ◽  
Vol 5 (3) ◽  
pp. 977-981 ◽  
Author(s):  
Anna-Maria Tilg ◽  
Charlotte Bay Hasager ◽  
Hans-Jürgen Kirtzel ◽  
Poul Hummelshøj
Keyword(s):  
Liquid Phase ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades ◽  
Spatio Temporal ◽  
The Impact ◽  
Theoretical Considerations ◽  
Mode A ◽  
Precipitation Events

Abstract. Leading-edge erosion (LEE) of wind turbine blades is caused by the impact of hydrometeors, which appear in a solid or liquid phase. A reduction in the wind turbine blades' tip speed during defined precipitation events can mitigate LEE. To apply such an erosion-safe mode, a precipitation nowcast is required. Theoretical considerations indicate that the time a raindrop needs to fall to the ground is sufficient to reduce the tip speed. Furthermore, it is described that a compact, vertically pointing radar that measures rain at different heights with a sufficiently high spatio-temporal resolution can nowcast rain for an erosion-safe mode.

scholarly journals Brief communication: Nowcasting of precipitation for leading edge erosion-safe mode

2020 ◽  
Author(s):  
Anna-Maria Tilg ◽  
Charlotte Bay Hasager ◽  
Hans-Jürgen Kirtzel ◽  
Poul Hummelshøj
Keyword(s):  
Liquid Phase ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades ◽  
Spatio Temporal ◽  
The Impact ◽  
Theoretical Considerations ◽  
Mode A ◽  
Precipitation Events

Abstract. Leading edge erosion (LEE) of wind turbine blades is caused by the impact of hydrometeors, which appear in solid or liquid phase. A reduction of the wind turbine blades’ tip speed during severe precipitation events can mitigate LEE. To apply such an erosion-safe mode, a precipitation nowcast is required. Theoretical considerations indicate that the time a raindrop needs to fall to the ground is sufficient to reduce the tip speed. Furthermore, it is described that a compact vertical pointing radar that measures rain in different heights with a sufficient high spatio-temporal resolution can nowcast rain for an erosion-safe mode.

scholarly journals Modelling Rain Drop Impact of Offshore Wind Turbine Blades

2012 ◽  
Author(s):  
M. H. Keegan ◽  
D. H. Nash ◽  
M. M. Stack
Keyword(s):  
Wind Turbine ◽  
Impact Damage ◽  
Turbine Blades ◽  
Leading Edge ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wind Turbine Blades ◽  
Erosion Testing ◽  
Software Modelling ◽  
The Impact

The effects of rain and hail erosion and impact damage on the leading edge of offshore wind turbine blades have been investigated. A literature review was conducted to establish the effects of exposure to these conditions and also to investigate the liquid impact phenomena and their implications for leading edge materials. The role of Explicit Dynamics software modelling in simulating impact events was then also established. Initial rain impact modelling is then discussed with the results showing good agreement with theoretical predictions both numerically and with respect to the temporal and spatial development of the impact event. Future development of the rain model and a proposed hail model are then detailed. Planned rain impact and erosion testing work is addressed which will be used to validate, inform and compliment the ongoing modelling efforts.

Effects of Leading-Edge Protection Tape on Wind Turbine Blade Performance

2012 ◽  
Vol 36 (5) ◽  
pp. 525-534 ◽  
Author(s):  
Agrim Sareen ◽  
Chinmay A. Sapre ◽  
Michael S. Selig
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Lower Surface ◽  
Wind Turbine Blades ◽  
Potential Benefits ◽  
Wind Turbine Airfoil ◽  
Turbine Airfoils ◽  
The Impact

This paper presents results of a study to investigate the impact of using wind protection tape (WPT) to protect the leading edge of wind turbine airfoils from erosion. The tests were conducted on the DU 96-W-180 wind turbine airfoil at three Reynolds numbers between 1 and 1.85 million and angles of attack spanning the low drag range of the airfoil. Tests were run by varying the chordwise extent of the wind protection tape on the upper and lower surface in order to determine the relative impact of each configuration on the aerodynamics of the airfoil. The objective was to assess the performance losses due to the wind protection tape and compare them with losses due to leading-edge erosion in order to determine the potential benefits of using such tape to protect wind turbine blades. Results showed that the application of wind protection tape caused a drag increase of 5–15% for the various configurations tested and was significantly less detrimental to airfoil performance than leading edge erosion that could otherwise occur.

Aerodynamics of leading-edge protection tapes for wind turbine blades

2020 ◽  
pp. 0309524X2097544
Author(s):  
Desirae Major ◽  
Jose Palacios ◽  
Mark Maughmer ◽  
Sven Schmitz
Keyword(s):  
Boundary Layer ◽  
Wind Turbine ◽  
Numerical Models ◽  
Turbine Blades ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Wind Turbine Blades ◽  
Layer Transition ◽  
Tape Edge ◽  
The Impact

This paper presents results of a comparative study on the effect of standard and tapered leading-edge protection (LEP) tapes on the annual energy production (AEP) of a utility-scale 1.5 MW wind turbine. Numerical models are developed in STAR-CCM+ to estimate the impact of LEP tapes on lift and drag coefficients of an NACA 64-618 airfoil operating at Re = 3 × 106. Experimental drag coefficient data are collected for LEP tapes applied to the tip-section of a de-commissioned wind turbine blade for numerical validation. The objective is to determine the physical mechanisms responsible for the aerodynamic degradation observed with standard LEP tapes, and to design a tapered LEP tape that reduces the associated adverse impact on AEP. An in-house wind turbine design and analysis code, XTurb-PSU, is used to estimate AEP using airfoil data obtained by STAR-CCM+. For standard LEP tapes, laminar-to-turbulent boundary-layer transition occurs at the LEP tape edge, resulting in AEP losses of 2%–3%. Comparable tapered LEP tapes can be designed to suppress boundary-layer transition for backward-facing step heights below a critical value such that associated impact on AEP is negligible.

Leading edge erosion of wind turbine blades: Understanding, prevention and protection

2021 ◽  
Vol 169 ◽  
pp. 953-969
Author(s):  
Leon Mishnaevsky ◽  
Charlotte Bay Hasager ◽  
Christian Bak ◽  
Anna-Maria Tilg ◽  
Jakob I. Bech ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades

Experimental investigations of flow over NACA airfoils 0021 and 4412 of wind turbine blades with and without Tubercles

2021 ◽  
pp. 0309524X2110071
Author(s):  
Usman Butt ◽  
Shafqat Hussain ◽  
Stephan Schacht ◽  
Uwe Ritschel
Keyword(s):  
Wind Tunnel ◽  
Drag Coefficient ◽  
Wind Turbine ◽  
Critical Region ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Experimental Investigations ◽  
Wind Turbine Blades

Experimental investigations of wind turbine blades having NACA airfoils 0021 and 4412 with and without tubercles on the leading edge have been performed in a wind tunnel. It was found that the lift coefficient of the airfoil 0021 with tubercles was higher at Re = 1.2×105 and 1.69×105 in post critical region (at higher angle of attach) than airfoils without tubercles but this difference relatively diminished at higher Reynolds numbers and beyond indicating that there is no effect on the lift coefficients of airfoils with tubercles at higher Reynolds numbers whereas drag coefficient remains unchanged. It is noted that at Re = 1.69×105, the lift coefficient of airfoil without tubercles drops from 0.96 to 0.42 as the angle of attack increases from 15° to 20° which is about 56% and the corresponding values of lift coefficient for airfoil with tubercles are 0.86 and 0.7 at respective angles with18% drop.

scholarly journals Review of Icing Effects on Wind Turbine in Cold Regions

2018 ◽  
Vol 72 ◽  
pp. 01007 ◽  
Author(s):  
Faizan Afzal ◽  
Muhammad S. Virk
Keyword(s):  
Wind Turbine ◽  
Structural Integrity ◽  
Turbine Blades ◽  
Leading Edge ◽  
Added Mass ◽  
Cold Climate ◽  
Ice Accretion ◽  
Wind Turbine Blades ◽  
Turbine Performance ◽  
Ice Shedding

This paper describes a brief overview of main issues related to atmospheric ice accretion on wind turbines installed in cold climate region. Icing has significant effects on wind turbine performance particularly from aerodynamic and structural integrity perspective, as ice accumulates mainly on the leading edge of the blades that change its aerodynamic profile shape and effects its structural dynamics due to added mass effects of ice. This research aims to provide an overview and develop further understanding of the effects of atmospheric ice accretion on wind turbine blades. One of the operational challenges of the wind turbine blade operation in icing condition is also to overcome the process of ice shedding, which may happen due to vibrations or bending of the blades. Ice shedding is dangerous phenomenon, hazardous for equipment and personnel in the immediate area.

scholarly journals CFD simulation on wind turbine blades with leading edge erosion

2021 ◽  
pp. 579-593
Author(s):  
Yan Wang ◽  
Liang Wang ◽  
Chenglin Duan ◽  
Jian Zheng ◽  
Zhe Liu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades
Sign in / Sign up

Export Citation Format

Share Document