scholarly journals Influence of a thick nitride layer on transmission loss in GaN-on-3C-SiC/low resistivity Si

Author(s):  
Arijit Bose ◽  
Debaleen Biswas ◽  
Shigeomi Hishiki ◽  
Sumito Ouchi ◽  
Koichi Kitahara ◽  
...  
2020 ◽  
Vol 41 (10) ◽  
pp. 1480-1483
Author(s):  
Arijit Bose ◽  
Debaleen Biswas ◽  
Shigeomi Hishiki ◽  
Sumito Ouchi ◽  
Koichi Kitahara ◽  
...  

1988 ◽  
Vol 49 (C4) ◽  
pp. C4-453-C4-456 ◽  
Author(s):  
P. E. HALLALI ◽  
P. BLANCONNIER ◽  
L. BRICARD ◽  
J-C. RENAUD

2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.


Author(s):  
Michael DiBattista ◽  
Kimball Skinner ◽  
Rick Kneedler ◽  
Leonid Vasilvey ◽  
Lukas Drybcak ◽  
...  

Abstract Circuit edit and failure analysis require tungsten deposition parameters to accomplish different goals. Circuit edit applications desire low resistivity values for rewiring, while failure analysis requires high deposition rates for capping layers. Tungsten deposition can be a well controlled process for a variety of beam parameters. For circuit edit, tungsten resistivity approaching below 150 µohm-cm and 50 μm3/nC is predicted. Material deposition rates of 80 μm3/nC can be achieved with reasonable pattern accuracy using defocus as a parameter.


Sign in / Sign up

Export Citation Format

Share Document