scholarly journals A prospective and randomized clinical trial evaluating the effectiveness of ART restorations with high-viscosity glass-ionomer cement versus conventional restorations with resin composite in Class II cavities of permanent teeth: two-year follow-up

2021 ◽  
Vol 29 ◽  
Author(s):  
Rafael MENEZES-SILVA ◽  
Sofia R Maito VELASCO ◽  
Eduardo BRESCIANi ◽  
Roosevelt da Silva BASTOS ◽  
Maria Fidela de Lima NAVARRO
Keyword(s):  
Clinical Trial ◽  
Randomized Clinical Trial ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Class Ii ◽  
High Viscosity ◽  
Permanent Teeth ◽  
Glass Ionomer ◽  
Ionomer Cement

Effect of Glass-ionomer Cement Lining on Postoperative Sensitivity in Occlusal Cavities Restored with Resin Composite—A Randomized Clinical Trial

2009 ◽  
Vol 34 (6) ◽  
pp. 648-655 ◽  
Author(s):  
M. F. Burrow ◽  
D. Banomyong ◽  
C. Harnirattisai ◽  
H. H. Messer
Keyword(s):  
Clinical Trial ◽  
Randomized Clinical Trial ◽  
Clinical Relevance ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Use Of Self ◽  
Total Etching ◽  
Postoperative Sensitivity ◽  
Ionomer Cement

Clinical Relevance Glass-ionomer lining showed no benefit in reducing postoperative sensitivity associated with occlusal resin composite restorations. The use of self-etching adhesive demonstrated postoperative sensitivity similar to that of total-etching adhesive.

scholarly journals Apexogenesis of traumatized maxillary right central incisor: Case report with 4years follow up

2019 ◽  
Vol 7 (1) ◽  
pp. 8
Author(s):  
Mohammad Hammo DDS ◽  
Mazen Doumani DDS. MSc. ◽  
Adnan Habib DDS. MSc. PhD
Keyword(s):  
Composite Resin ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Permanent Teeth ◽  
Glass Ionomer ◽  
Central Incisor ◽  
Vital Pulp Therapy ◽  
Open Apices ◽  
Ionomer Cement

The main goal of vital pulp therapy is to preserve and maintain pulpal health in teeth that have been exposed to caries, trauma, and restorative procedures. This type of endodontic treatment is very important in young permanent teeth that have not reached their complete length and exhibit thin-walled roots and wide open apices. The developments in knowledge of pulpal physiology and immunology, beside to newly introduced dental materials, have changed the treatment approaches for teeth with involved pulps. This report describes a case of a young patient in whom maxillary right central incisor suffered crown fractures because of a traumatic accident. Pulpotomy with MTA were performed in order to achieve apexogenesis and the tooth was restored with a glass ionomer cement and composite resin. The patient was reviewed over 4years. 

Clinical Performance of Heat-Cured High-Viscosity Glass Ionomer Class II Restorations in Primary Molars: A Preliminary Study

2017 ◽  
Vol 41 (4) ◽  
pp. 264-270 ◽  
Author(s):  
Eliyahu Tal ◽  
Ari Kupietzky ◽  
Anna B Fuks ◽  
Nili Tickotsky ◽  
Moti Moskovitz
Keyword(s):  
Clinical Performance ◽  
Glass Ionomer Cement ◽  
Class Ii ◽  
High Viscosity ◽  
Primary Molars ◽  
Restorative Material ◽  
Glass Ionomer ◽  
Recall Time ◽  
Preliminary Study ◽  
Ionomer Cement

Objectives: The present preliminary study evaluated the clinical and radiographic performances of heat-cured high viscosity glass ionomer (HCHVGI) in class II restorations of primary molars. Study design: A retrospective study on a cohort of patients who had dental caries restored at a private practice was conducted. Restorations were evaluated radiographically and photographically by two separate examiners. Results: Ninety-three Class II restorations in 44 patients (average age: 108 months ± 25.3, 24 males, 20 females) were examined. Average recall time was 22.2 months ± 4.2. All but three restorations (96.8%) were present and intact, with no incidents of secondary caries. Three additional restorations had occlusal defects that required retreatment, resulting in an overall success rate of 93.5%. Ninety-seven percent of the restorations were rated optimal for marginal integrity with no staining of the restoration surfaces. No patients complained of post-operative sensitivity. The most common flaw found was a concavity on the proximal wall of the cavity box (27%, mean age 16 months ± 3.9). Conclusion: The findings in this preliminary study suggest that heat cured high viscosity glass ionomer cement may be an effective restorative material for Class II restorations in primary molars that are a year or two from shedding.

Impact of the Porosity from Incremental and Bulk Resin Composite Filling Techniques on the Biomechanical Performance of Root-Treated Molars

2021 ◽  
Author(s):  
RAS Pereira ◽  
PBF Soares ◽  
AA Bicalho ◽  
LM Barcelos ◽  
LRS Oliveira ◽  
...  
Keyword(s):  
Fracture Mode ◽  
Fracture Resistance ◽  
Composite Resin ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
High Viscosity ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Pulp Chamber ◽  
Ionomer Cement

SUMMARY Objectives: To analyze the effect of the porosity caused by incremental and bulk resin composite filling techniques using low- and high-viscosity composite resins on the biomechanical performance of root-treated molars. Methods: Forty intact molars received standardized mesio-occlusal-distal (MOD) cavity preparation, were root treated, and randomly divided into four groups with different filling techniques (n=10). The first involved two incremental filling techniques using VIT/Z350XT, a nanofilled composite resin (Filtek Z350XT, 3M ESPE) associated with a resinmodified glass ionomer cement, and resin-modified glass ionomer cement (RMGIC; Vitremer, 3M ESPE) for filling the pulp chamber. The second involved TPH/VIT, a microhybrid composite resin TPH3 Spectrum associated with Vitremer. The third and fourth involved two bulk-fill composite resins: SDR/TPH, a low-viscosity resin composite (Surefill SDR flow, Dentsply) associated with TPH3 Spectrum, and POST, a high-viscosity bulkfill resin composite (Filtek Bulk Fill Posterior, 3M ESPE). The volume of the porosity inside the restoration was calculated by micro-CT. The cusp deformation caused by polymerization shrinkage was calculated using the strain-gauge and micro-CT methods. The cusp deformation was also calculated during 100 N occlusal loading and loading to fracture. The fracture resistance and fracture mode were recorded. Data were analyzed by one-way analysis of variance and Tukey test. The fracture mode was analyzed by the χ2 test. The volume of the porosity was correlated with the cusp deformation, fracture resistance, and fracture mode (α=0.05). Results: Incremental filling techniques associated with RMGIC resulted in a significantly higher porosity than that of both bulk-fill techniques. However, no significant difference was found among the groups for the fracture resistance, fracture mode, and cusp deformation, regardless of the measurement time and method used. No correlation was observed between the volume of the porosity and all tested parameters. Conclusions: The porosity of the restorations had no influence on the cuspal deformation, fracture resistance, or fracture mode. The use of the RMGIC for filling the pulp chamber associated with incremental composite resins resulted in similar biomechanical performance to that of the flowable or regular paste bulk-fill composite resin restorations of root-treated molars.

A One-Year Clinical Evaluation of a High-Viscosity Glass Ionomer Cement in Primary Molars

2006 ◽  
Vol 7 (1) ◽  
pp. 71-78 ◽  
Author(s):  
Yucel Yilmaz ◽  
Özge Eyuboglu ◽  
Mutlu Elcin Kocogullari ◽  
Nihal Belduz
Keyword(s):  
Clinical Evaluation ◽  
Glass Ionomer Cement ◽  
Class Ii ◽  
High Viscosity ◽  
Class I ◽  
Primary Molars ◽  
Glass Ionomer ◽  
Significant Difference ◽  
One Year ◽  
Ionomer Cement

Abstract In this study one-year clinical results of high-viscosity glass ionomer cement (GIC) (Fuji IX, A3, GC, Japan) were determined in class I and class II restorations in 68 primary molars with occlusal or approximal caries. Following caries removal and cavity preparation, the teeth were restored with Fuji IX. The restorations were evaluated according to the U.S. Public Health Service's (USPHS) criteria at the end of one year. Statistical analyses of the data obtained were analyzed using the X2 test. The evaluations showed no statistically significant difference between class I and class II restorations in terms of the color mismatch, anatomic form, marginal adaptation, and secondary caries (P>0.05), but they were statistically significant with regard to cavosurface marginal discoloration (P<0.05). At the end of one year, the success rate of the class I and class II restorations of the primary molars restored with Fuji IX was 94%. Citation Yilmaz Y, Eyuboglu Ö, Kocogullari ME, Belduz M. A One-Year Clinical Evaluation of a High-Viscosity Glass Ionomer Cement in Primary Molars. J Contemp Dent Pract 2006 February;(7)1:071-078.

The Effect of Resin-modified Glass-ionomer Cement Base and Bulk-fill Resin Composite on Cuspal Deformation

2016 ◽  
Vol 41 (2) ◽  
pp. 208-218 ◽  
Author(s):  
KV Nguyen ◽  
RH Wong ◽  
J Palamara ◽  
MF Burrow
Keyword(s):  
Resin Composite ◽  
Glass Ionomer Cement ◽  
High Viscosity ◽  
Glass Ionomer ◽  
Base Materials ◽  
Resin Modified Glass Ionomer ◽  
Maxillary Premolars ◽  
Materials Used ◽  
Ionomer Cement ◽  
Adhesive Materials

SUMMARY Objectives: This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. Methods: Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and restored with either a sonic-activated bulk-fill resin composite (RC) (SonicFill), or a conventional nanohybrid RC (Herculite Ultra). The base materials used were a flowable nanofilled RC (Premise Flowable) and a high-viscosity resin-modified glass-ionomer cement (RMGIC) (Riva Light-Cure HV). Cuspal deflection was measured with two direct current differential transformers, each contacting a buccal and palatal cusp. Cuspal movements were recorded during and after restoration placement. Data for the buccal and palatal cusp deflections were combined to give the net cuspal deflection. Results: Data varied widely. All teeth experienced net inward cuspal movement. No statistically significant differences in cuspal deflection were found among the four test groups. Conclusions: The use of a flowable RC or an RMGIC in closed-laminate restorations produced the same degree of cuspal movement as restorations filled with only a conventional nanohybrid or bulk-fill RC.

Sign in / Sign up

Export Citation Format

Share Document