Response of dental pulp capped with calcium-silicate based material, calcium hydroxide and adhesive resin in rabbit teeth

Direct pulp capping induces a local inflammatory process. Several biomaterials have been used for this procedure. The aim of this study was to compare the dentinal bridge thickness using three different pulp capping biomaterials with the conventional technique (high speed diamond bur) or Er-Yag laser, 1 month after pulp effraction. Materials and Methods: Forty two Class V cavities were prepared on the buccal surface of 4 maxillary incisors and 2 mandibular incisors of New Zealand rabbits. Specimens were divided into 6 treatment groups. Teeth were treated with: In Group 1: Er-Yag laser and Biodentine® (Septodont), in Group 2: Er: Yag laser and calcium hydroxide (Dycal® Dentsply), in Group 3: Er: Yag laser and adhesive system (Prime& Bond® NT Dentsply), in Group 4: high speed diamond bur and Biodentine® (Septodont), in Group 5: high speed diamond bur and calcium hydroxide (Dycal® Dentsply), and in Group 6: high speed diamond bur and adhesive system (Prime& Bond® NT Dentsply). The preparation was done with copious irrigation. The animals were sacrificed at 30 days and the teeth were extracted and prepared for histological analysis. Results: In the group of « laser Er-Yag », iatrogenic pulpal wounds treated with Biodentine® were covered with a thick hard tissue barrier after 1 month. The difference was not significant with the groups of Dycal® used with Er: Yag laser and high speed diamond bur. Prime& Bond® NT Dentsply specimens showed a thin dentinal bridge layer. Conclusion: At 1 month, Er-Yag laser proved to be useful with Biodentine® for direct pulp capping procedures.

In Vitro and In Vivo Efficacy of New Composite for Direct Pulp Capping

Objectives. To investigate physicochemical properties, dentin bonding, cytotoxicity, and in vivo pulp response of experimental self-adhesive composites tailored to direct pulp capping. Materials and Methods. Experimental composites were prepared with beta-tricalcium phosphate and hydroxyapatite nanoparticles adsorbed with simvastatin and glutathione added at 0% (control resin), 1 wt% (Res 1%), and 10 wt% (Res 10%). A commercial light-curable calcium hydroxide (Ca(OH)2) (Ultra-Blend Plus) was used as control material. The physicochemical properties investigated were flexural strength and modulus, calcium release, and degree of conversion. Dentin bonding was assessed by the push-out test. Proliferation and cell counting assays were performed to evaluate in vitro cytotoxicity using fluorescence microscopy. In vivo pulp capping was performed on molars of Wistar rats, which were euthanized after 14 days and evaluated by histological analysis. Results. No statistical difference was observed in flexural strength and cell viability ( p > 0.05 ). Res 10% presented higher modulus than control resin and Ca(OH)2. Also, Res 10% attained statistically higher degree of conversion when compared to other experimental composites. Ca(OH)2 showed higher calcium release after 28 and 45 days of storage, with no statistical difference at 45 days to Res 10%. All experimental composites achieved significantly higher bond strength when compared to Ca(OH)2. While no significant difference was observed in the cell proliferation rates, resins at lower concentrations showed higher cell viability. In vivo evaluation of pulp response demonstrated no pulp damage with experimental composites. Conclusions. The experimental composite investigated in this study achieved adequate physicochemical properties with minor in vivo pulpal inflammation and proved to be a valuable alternative for direct pulp capping.

Effectiveness of Direct Pulp Capping Bioactive Materials in Dentin Regeneration: A Review

Background: Regenerative endodontics aims to restore normal pulp function in necrotic and infected teeth, restoring protective functions, such as innate pulp immunity, pulp repair through mineralization, and pulp sensibility. The aim of this systematic review was to assess the dentin regeneration efficacy of direct pulp capping (DPC) biomaterials. Methods: The literature published between 2005 and 2021 was searched by using PubMed, Web of Science, Science Direct, Google Scholar, and Scopus databases. Clinical controlled trials, randomized controlled trials, and animal studies investigating DPC outcomes or comparing different capping materials after pulp exposure were included in this systematic review. Three independent authors performed the searches, and information was extracted by using a structured data format. Results: A total of forty studies (21 from humans and 19 from animals) were included in this systemic review. Histological examinations showed complete/partial/incomplete dentin bridge/reparative dentin formation during the pulp healing process at different follow-up periods, using different capping materials. Conclusions: Mineral trioxide aggregate (MTA) and Biodentine can induce dentin regeneration when applied over exposed pulp. This systematic review can conclude that MTA and its variants have better efficacy in the DPC procedure for dentin regeneration.

Comparison of Clinical Success between Three Different Materials- Direct Pulp Capping of Carious Molars- An In-vivo Study

Aim: To evaluate the clinical success of Calcium Hydroxide (CH), Mineral trioxide aggregate (MTA) and Biodentine as pulp capping materials for Direct pulp capping in carious molars. Materials and Methods: Thirty-six molars of thirty-six patients with deep caries lesions, diagnosed with reversible pulpitis were subjected to direct pulp capping treatment. They were randomly divided into three groups, Biodentine (12 teeth) or MTA group (12 teeth) or CH group (12teeth). Simple randomization of three was employed to allocate the treatment materials. Patients were recalled at one, three and six months to evaluate the clinical success of the treatment outcome. Results: In clinical trial/study, the pulp capping materials gave different success rate, 91.67% success in the Biodentine group, 75% success in the MTA group and 41.67% success in Calcium Hydroxide group. Conclusion: In our study the materials tested at 1 month, 3 month and 6-month follow-up, Calcium Silicate materials are better than calcium hydroxide and comparably Biodentine is better than MTA for Direct pulp capping. Clinical Significance: The findings of this clinical trial could promote the reliability of pulp capping materials for treatment of deep carious lesions by conservative approach rather than opting endodontic management.

Effectiveness of Calcium Hydroxide (CaOH) as agent for Direct Pulp Capping in the Mandibular Molars

Background: Direct Pulp Capping technique has been in use as a treatment therapy to sustain a vital pulp. The substitute procedure to the endodontic therapy or extraction is precise & successful pulp capping. Calcium hydroxide (CaOH) is considered as gold standard agent for pulp capping because of antibacterial characteristics & ability to form dentinal bridge. Calcium hydroxide has also shown great results on peri-apical healing process. Aim: To evaluate success rate of direct pulp capping when CaOH is used as a direct pulp capping agent Setting: Multan Dental College Multan Methodology: Sample size 60 cases. Patients of 15-40 years age group were selected with the exposure of the vital pulp by caries or Trauma in permanent lower molars clinically. Those cases with pinpoint (precise) exposure of pulp were selected. Flow of blood from site of exposure should be ceased inside two to three minutes after the applying the soaking cotton pallet with the saline. Results: 25 were woman (41.67%) and 35 were men (58.33%). Overall percentage of success is 80% which means that 48 patients had showed effectiveness, while twelve patients had shown failure of pulp capping Conclusion: We conclude that Calcium hydroxide is a choice for the direct pulpal capping. When a site of exposure is sealed/ wrapped by means of calcium hydroxide, the odds of the failure may decrease, and prognosis might be good. Keywords: Calcium hydroxide, Direct Pulp Capping, Postoperative X-ray, follow-up

MMP-9 Levels and NaOCl Lavage in Randomized Trial on Direct Pulp Capping

Outcome expectations of direct pulp capping in carious teeth are obscured by a clinically unknown infiltration and breakdown of the dental pulp tissue. Histologic studies showed that this soft tissue breakdown is related to the innate immune system. We hypothesized 1) that a neutrophil biomarker could predict the outcome of direct pulp capping and 2) that using sodium hypochlorite (NaOCl) as a lavage solution to remove necrotized infected pulp tissue could improve it. In this randomized trial in mature posterior teeth causing no or mild discomfort with carious pulpal exposures, pulpal fluid was collected to assess neutrophil gelatinase (matrix metalloproteinase 9 [MMP-9]) per total protein (TP) levels as a predictive local biomarker. Subsequently, the dentin-pulp wound was randomly washed with a 2.5% NaOCl or a physiologic saline solution (1:1 allocation), capped with mineral trioxide aggregate, and the tooth was immediately restored with a resin-based composite restoration. Ninety-six patients were included, and 84 individuals could be followed up to treatment failure or clinically confirmed pulp survival after a minimum of 1 y. The entire data were fitted to a Cox proportional hazards model to assess the influence of the observational variables MMP-9/TP and discomfort with the randomized lavage treatment on pulp survival. The Kaplan-Meier pulp survival rates after 1 y were 55% for saline and 89% for NaOCl lavage. The inflammatory state of the pulp tissue as reflected by MMP-9/TP levels and NaOCl lavage had a highly significant ( P < 0.001 and P = 0.004, respectively) impact on pulp survival, while mild preoperative discomfort did not. In conclusion, MMP-9/TP showed great promise as a predictive local biomarker, and NaOCl lavage considerably improved the survival time of cariously exposed and directly capped pulps.