Flavia de Paula Vitoretti
◽
Maria Carolina dos Santos Freitas
◽
Camila Martins Hosken
◽
Jose Adilson de Castro
◽
Fabiane Roberta Freitas da Silva
The increasing demand for new technologies in the ironmaking/steelmaking field has been motivating several studies towards pelletizing process improvement. Within this context, evaluate the reduction of iron ore pellets using the dilatometer technique constitutes a promising approach for optimizing this process. This paper aims the metallurgical characterization through the sintering of particles in iron ore pellets. With this purpose, some experimental procedures are of concern as follows. Firstly, the kinetic densification of the iron ore pellets is measured using a dilatometer, which heats the samples up at 30 K/min until high temperatures about 1473 K and an isotherm at 10 minutes have been done. Then, the sample is cooled back to room temperature and undergoes a microstructural characterization, with the aid of a scanning electron microscope. At last, the density of the pellets is evaluated, using an Arquimedes Principle and consequently the porosity of the agglomerates. The results indicate the sintering progress of the particles that comprise the pellets as well as reduction the porosity. This behavior is due to the fact that the heat arising from gas induces the partial liquid phase formation and involves the agglomerate particles aiding in the sintering process.
Evaluation of the Use of Microwave Energy on The Reduction of Iron Ore and Steelmaking Mill Scale Composite Self-Reducing Mixtures