THE RELEASE AND TRANSPORT OF LOW VOLATILITY FISSION PRODUCTS UNDER SEVERE ACCIDENT CONDITIONS

1995 ◽  
Author(s):  
Richard R. Hobbins ◽  
Daniel J. Osetek
Keyword(s):  
Fission Products ◽  
Severe Accident ◽  
Accident Conditions

scholarly journals Contribution to the study of fission products release from nuclear fuels in severe accident conditions: effect of the pO2 on Cs, Mo and Ba speciation

2020 ◽  
Vol 6 ◽  
pp. 2 ◽  
Author(s):  
Claire Le Gall ◽  
Fabienne Audubert ◽  
Jacques Léchelle ◽  
Yves Pontillon ◽  
Jean-Louis Hazemann
Keyword(s):  
Oxygen Potential ◽  
Fission Products ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Mox Fuel ◽  
Chemical Behaviour ◽  
Accident Conditions ◽  
The Impact

The objective of this work is to experimentally investigate the effect of the oxygen potential on the fuel and FP chemical behaviour in conditions representative of a severe accident. More specifically, the speciation of Cs, Mo and Ba is investigated. These three highly reactive FP are among the most abundant elements produced through 235U and 239Pu thermal fission and may have a significant impact on human health and environmental contamination in case of a light water reactor severe accident. This work has set out to contribute to the following three fields: providing experimental data on Pressurized Water Reactor (PWR) MOX fuel behaviour submitted to severe accident conditions and related FP speciation; going further in the understanding of FP speciation mechanisms at different stages of a severe accident; developing a method to study volatile FP behaviour, involving the investigation of SIMFuel samples manufactured at low temperature through SPS. In this paper, a focus is made on the impact of the oxygen potential towards the interaction between irradiated MOX fuels and the cladding, the interaction between Mo and Ba under oxidizing conditions and the assessment of the oxygen potential during sintering.

scholarly journals Fission products behaviour in UO2submitted to nuclear severe accident conditions

2016 ◽  
Vol 712 ◽  
pp. 012098
Author(s):  
E Geiger ◽  
R Bès ◽  
P Martin ◽  
Y Pontillon ◽  
P L Solari ◽  
...  
Keyword(s):  
Fission Products ◽  
Severe Accident ◽  
Accident Conditions

scholarly journals Fission products and nuclear fuel behaviour under severe accident conditions part 2: Fuel behaviour in the VERDON-1 sample

2017 ◽  
Vol 495 ◽  
pp. 49-57 ◽  
Author(s):  
E. Geiger ◽  
C. Le Gall ◽  
A. Gallais-During ◽  
Y. Pontillon ◽  
J. Lamontagne ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Fission Products ◽  
Severe Accident ◽  
Accident Conditions

Best Estimate Analysis of PHEBUS FPT1 Test Using RELAP/SCDAPSIM Code

2012 ◽  
Author(s):  
Tadas Kaliatka ◽  
Eugenijus Ušpuras ◽  
Virginijus Vileiniškis
Keyword(s):  
Reactor Core ◽  
Fission Products ◽  
Severe Accident ◽  
Cooperative Research ◽  
Best Estimate ◽  
Fuel Bundle ◽  
Calculation Results ◽  
Estimate Method ◽  
Analysis Computer ◽  
Accident Conditions

The PHEBUS-FP program is an outstanding example of an international cooperative research program that is yielding valuable data for validating severe accident analysis computer codes. The main objective of the PHEBUS FPT1 experiment was to study the processes in the overheated reactor core, release of fission products and their subsequent transport and deposition under conditions representative of a severe accident of a Pressurised Water Reactor. The FPT1 test could be divided in the bundle degradation, aerosol, washing and chemistry phases. The objective of this article is the best estimate analysis of the bundle degradation phase. GRS (Germany) best estimate method with the statistic tool SUSA used for uncertainty and sensitivity analysis of calculation results and RELAP/SCDAPSIM code, designed to predict the behaviour of reactor systems during severe accident conditions, was used for the simulation of this test. The RELAP/SCDAPSIM calculation results were compared with the experimental measurements and calculations results, received by employing ICARE module of ASTEC V2 code. The performed analysis demonstrated, that the best estimate method, employing RELAP/SCDAPSIM and SUSA codes, is capable to model main severe accidents phenomena in the fuel bundle during the overheating and melting of reactor core.

IRSN R&D Actions on FP Behaviour for RCS, Containment and FCVS in Severe Accident Conditions

2016 ◽  
Author(s):  
Laurent Cantrel ◽  
Thierry Albiol ◽  
Loïc Bosland ◽  
Juliette Colombani ◽  
Frédéric Cousin ◽  
...  
Keyword(s):  
Porous Materials ◽  
Nuclear Power ◽  
Source Term ◽  
Cooling System ◽  
Fission Products ◽  
Simulation Software ◽  
Severe Accident ◽  
Status Report ◽  
Diagnosis And Prognosis ◽  
Accident Conditions

This paper deals with near past, ongoing and planned R&D works on fission products (FPs) behaviour in Reactor Cooling System (RCS), containment building and in Filtered Containment Venting Systems (FCVS) for severe accident (SA) conditions. For the last topic, in link with the Fukushima post-accident management and possible improvement of mitigation actions for such SA, the FCVS topic is again on the agenda (see Status Report on Filtered Containment Venting, OECD/NEA/CSNI, Report NEA/CSNI/R(2014)7, 2014.) with a large interest at the international scale. All the researches are collaborative works; the overall objective is to develop confident models to be implemented in ASTEC SA simulation software. After being initiated in the International Source Term Program (ISTP), researches devoted to the understanding of iodine transport through the RCS are still ongoing in the frame of a bilateral agreement between IRSN and EDF with promising results. In 2017, a synthesis report of the last 10 years of researches, which have combined experimental and fundamental works based on the use of theoretical chemistry tools, will be issued. For containment, the last advances are linked to the Source Term Evaluation and Mitigation (STEM) OECD/NEA project operated by IRSN. The objective of the STEM project was to improve the evaluation of Source Term (ST) for a SA on a nuclear power plant and to reduce uncertainties on specific phenomena dealing with the chemistry of two major fission products: iodine and ruthenium. More precisely, the STEM project provided additional knowledge and improvements for calculation tools in order to allow a more robust diagnosis and prognosis of radioactive releases in a SA. STEM data will be completed by a follow-up, called STEM2, to further the knowledge concerning some remaining issues and be closer to reactor conditions. Two additional programmes deal with FCVS issues: the MItigation of outside Releases in the Environment (MIRE) (2013–2019) French National Research Agency (NRA) programme and the Passive and Active Systems on Severe Accident source term Mitigation (PASSAM) (2013–2016) European project. For FCVS works, the efficiencies for trapping iodine with various FCVS, covering scrubbers and dry filters, are examined to get a clear view of their abilities in SA conditions. Another part, performed in collaboration with French universities (Lorraine and Lille 1), is focused on the enhancement of the performance of these filters with specific porous materials able to trap volatile iodine. For that, influence of zeolites materials parameters (nature of the counter-ions, structure, Si/Al ratio …) will be tested. New kind of porous materials constituted by Metal organic Frameworks (MOF) will also be looked at because they can constitute a promising way of trapping.

scholarly journals Fission products and nuclear fuel behaviour under severe accident conditions part 1: Main lessons learnt from the first VERDON test

2017 ◽  
Vol 495 ◽  
pp. 363-384 ◽  
Author(s):  
Y. Pontillon ◽  
E. Geiger ◽  
C. Le Gall ◽  
S. Bernard ◽  
A. Gallais-During ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Fission Products ◽  
Severe Accident ◽  
Lessons Learnt ◽  
Accident Conditions

Research Works on Iodine and Ruthenium Behavior in Severe Accident Conditions

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Laurent Cantrel ◽  
Thierry Albiol ◽  
Loïc Bosland ◽  
Juliette Colombani ◽  
Frédéric Cousin ◽  
...  
Keyword(s):  
Porous Materials ◽  
Nuclear Power ◽  
Cooling System ◽  
Fission Products ◽  
Simulation Software ◽  
Severe Accident ◽  
Counter Ions ◽  
Metal Organic ◽  
Nature Gas ◽  
Accident Conditions

This paper deals with near past, ongoing, and planned R&D works on fission products (FPs) behavior in reactor cooling system (RCS), containment building and in filtered containment venting systems (FCVS) for severe accident (SA) conditions. All the researches are collaborative works; the overall objective is to develop confident models to be implemented in simulation software. After being initiated in 2004, researches on iodine transport through the RCS are still ongoing and for containment, the last advances are linked to the source term (ST) evaluation and mitigation (STEM) OECD/NEA project. The objective is to improve the evaluation of ST for a SA on a nuclear power plant and to reduce uncertainties on specific phenomena dealing with the chemistry of two major FPs: iodine and ruthenium. For ruthenium attention has been paid to study the amount and nature (gas/aerosol partition) of ruthenium species along the RCS. A follow-up, called STEM2, has started to reduce some remaining issues and be closer to reactor conditions. For FCVS works, the efficiencies for trapping iodine covering scrubbers and dry filters are examined to get a clear view of their abilities in SA conditions. Another part is focused on specific porous materials able to trap volatile iodine. Influence of zeolite materials parameters (nature of the counter-ions, structure, Si/Al ratio…) are tested as well as new kind of porous materials constituted by Metal organic Frameworks will also be looked at.

Release Kinetics of Volatile Fission Products Under Severe Accident Conditions

1992 ◽  
Vol 99 (3) ◽  
pp. 330-342 ◽  
Author(s):  
Brent J. Lewis ◽  
Fernando C. Iglesias ◽  
C. E. Laurence Hunt ◽  
David S. Cox
Keyword(s):  
Release Kinetics ◽  
Fission Products ◽  
Severe Accident ◽  
Accident Conditions ◽  
Kinetics Of

scholarly journals Insights on fission products behaviour in nuclear severe accident conditions by X-ray absorption spectroscopy

2016 ◽  
Vol 471 ◽  
pp. 25-33 ◽  
Author(s):  
E. Geiger ◽  
R. Bès ◽  
Ph Martin ◽  
Y. Pontillon ◽  
G. Ducros ◽  
...  
Keyword(s):  
Absorption Spectroscopy ◽  
Fission Products ◽  
Severe Accident ◽  
X Ray ◽  
Accident Conditions ◽  
X Ray Absorption

scholarly journals Fission products and nuclear fuel behaviour under severe accident conditions part 3: Speciation of fission products in the VERDON-1 sample

2017 ◽  
Vol 495 ◽  
pp. 291-298 ◽  
Author(s):  
C. Le Gall ◽  
E. Geiger ◽  
A. Gallais-During ◽  
Y. Pontillon ◽  
J. Lamontagne ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Fission Products ◽  
Severe Accident ◽  
Accident Conditions
Sign in / Sign up

Export Citation Format

Share Document