3.2 Flexural behaviour of steel beams reinforced with carbon fibre reinforced polymer composite

Author(s):  
S S J Moy ◽  
F Nikoukar
2019 ◽  
Author(s):  
Kristian Gjerrestad Andersen ◽  
Gbanaibolou Jombo ◽  
Sikiru Oluwarotimi Ismail ◽  
Segun Adeyemi ◽  
Rajini N ◽  
...  

2004 ◽  
Vol 31 (2) ◽  
pp. 239-252 ◽  
Author(s):  
Raafat El-Hacha ◽  
Mark F Green ◽  
R Gordon Wight

This paper presents results of an experimental investigation that examined concrete beams post-tensioned with bonded carbon fibre reinforced polymer (CFRP) sheets and then exposed to either room (+22 °C) or low (-28 °C) temperatures. The primary objective of this investigation was to assess the flexural behaviour of the strengthened beams after sustained loadings at both room and low temperatures. The strengthened beams showed significant increases in flexural stiffness and ultimate capacity as compared with the control-unstrengthened beams. Failure of the strengthened beams was by tensile rupture of the prestressed CFRP sheets. Test results showed that the long-term and low temperature effects did not adversely affect the strength of the beams. Long-term loading and low temperature exposure caused prestress losses in the CFRP sheets. The load–deflection behaviour of the long-term beams was predicted accurately by an analytical model. These results suggest that bonded prestressed CFRP sheets could be used to increase the strength of damaged prestressed concrete girders under extreme environmental conditions.Key words: strengthening, anchorage, low temperature, long-term, prestress losses, sustained load, carbon fibre reinforced polymer sheet.


2017 ◽  
Vol 21 (8) ◽  
pp. 1148-1161 ◽  
Author(s):  
Qian-Qian Yu ◽  
Yu-Fei Wu

In recent years, externally bonded carbon fibre–reinforced polymer has been considered an innovative way to strengthen steel structures attributed to its high strength-to-weight ratio, excellent corrosion resistance and fatigue performance. This article presents an experimental and numerical study on the fatigue behaviour of defected steel beams strengthened with carbon fibre–reinforced polymer laminates, with a special focus on the effect of interfacial debonding. Analytical modelling and numerical simulation confirmed that the interfacial debonding had a pronounced effect on carbon fibre–reinforced polymer strain and stress intensity factor at the crack front. After introducing interfacial debonding from experimental findings into the numerical analysis, the fatigue life and crack propagation versus cycle numbers of the specimens compared well with the test results. Based on the current experimental program, specimens with Sikadur 30 were more prone to debonding failure; therefore, Araldite 420 is suggested for strengthening schemes.


Sign in / Sign up

Export Citation Format

Share Document