STATIC MODULUS OF ELASTICITY OF STEEL FIBER REINFORCED CONCRETE

Author(s):  
Virendra Kumar ◽  
A K Sinha ◽  
M M Prasad
Author(s):  
A. O. Khegai ◽  
◽  
N. M. Kirilin ◽  
T. S. Khegai ◽  
O. N. Khegai ◽  
...  

The tangent modulus of elasticity and deformation modulus are the most important characteristics of steel fiber reinforced concrete. The tangent modulus of elasticity corresponds to the initial loading stage, whereas in the operation stage and the fracture stage, there is a modulus of the material deformation, which is smaller, due to the formation of cracks in the element and non-linear behavior of the material. The paper presents experimental investigations of the tangent modulus of elasticity and the deformation modulus of fiber-reinforced concrete, class В60 at various percentages of fiber reinforcement. Existing approaches to determination of the tangent modulus of elasticity are considered. The results obtained are compared with those presented by other researchers. Analytical dependence is proposed for determination of deformation modulus depending on the percentage of fiber reinforcement.


2016 ◽  
Vol 845 ◽  
pp. 220-225 ◽  
Author(s):  
Yenny Nurchasanah ◽  
Mohamed Alfitouri Masoud ◽  
Mochammad Solikin

The effect of strength, weight, and fibers on properties of concrete at different temperatures is highlighted at this research to analyze the compressive strength and modulus of elasticity of steel fiber reinforced concrete (SFRC) on 1% and 1.5% of volume fractions at three temperature levels 200°C, 400°C and 600°C. This study compare the compressive strength and modulus elasticity between normal concrete and SFRC in various volume fraction of steel fiber as reinforcement on elevated temperature heating up to 600°C. Materials were tested to find out the quality of the material before making the concrete specimen. The tests were performed compressive test and modulus of elasticity. The addition of 1% and 1.5% steel fiber in concrete mix is advantageous for concrete. Overall the compressive strength of concrete was increased as the percentage of steel fiber in concrete increases. At 1.5%, steel fiber reinforced concrete showed a better overall residual strength and better crack resistance than non-fiber concrete. The carbonation process for concrete with steel fiber is a little influenced by temperature compare to concrete without steel fiber. The concrete with 1.5 % steel fiber demonstrated the highest compressive and modulus of elasticity value, 23.5 and 17172MPa at 600°C respectively. It is expected that in future concrete having steel fiber will act as a fire protective considerably.


2017 ◽  
Vol 59 (7-8) ◽  
pp. 653-660 ◽  
Author(s):  
Wang Yan ◽  
Ge Lu ◽  
Chen Shi Jie ◽  
Zhou Li ◽  
Zhang Ting Ting

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.


1984 ◽  
Vol 21 (3) ◽  
pp. 108-111
Author(s):  
V. S. Sterin ◽  
V. A. Golubenkov ◽  
G. S. Rodov ◽  
B. V. Leikin ◽  
L. G. Kurbatov

Sign in / Sign up

Export Citation Format

Share Document