scholarly journals THE USE OF AUTOMATED SYNOPTIC TYPING FOR CONDITIONAL VERIFICATION OF NUMERICAL WEATHER PREDICTION IN THE PERM REGION

2021 ◽  
pp. 68-80
Author(s):  
Sergey V. Kostarev ◽  
◽  
Igor N. Rusin ◽  
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Central Area ◽  
Principal Component ◽  
Sharp Decrease ◽  
Synoptic Type ◽  
Numerical Weather ◽  
Perm Region ◽  
Forecast Quality

The article discusses the possibility of verification of short-term 2-meter air temperature forecasts with the Global Forecast System and Global Environment Multiscale numerical weather prediction models depending on the observed synoptic type (a case study of the Perm region for the period 2018–2019). As part of the study, we have developed a system of automated determination of synoptic type based on a two-stage procedure, including decomposition of mean sea level pressure fields via principal component analysis and the subsequent clustering of decomposition coefficients using K-means. It has been established that GFS forecasts are more dependent on synoptic type in summer than in winter. The decline of forecast quality, expressed in systematic underestimation of forecast temperature by 0.6°–1.2°, is noted for synoptic types associated with warm air advection.: In contrast, GEM forecasts tend to lack accuracy in winter. A sharp decrease in forecast quality has been discovered in the central area of anticyclone at night, when the forecast accuracy drops to 44%. The obtained results could be useful in operational forecasting and model postprocessing.

scholarly journals Parametrizations of Liquid and Ice Clouds’ Optical Properties in Operational Numerical Weather Prediction Models

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 89
Author(s):  
Harel. B. Muskatel ◽  
Ulrich Blahak ◽  
Pavel Khain ◽  
Yoav Levi ◽  
Qiang Fu
Keyword(s):  
Optical Properties ◽  
Numerical Weather Prediction ◽  
Radiation Transfer ◽  
Prediction Models ◽  
Weather Prediction ◽  
Effective Size ◽  
Asymmetry Factor ◽  
Numerical Weather ◽  
Numerical Weather Prediction Models ◽  
Spectral Averaging

Parametrization of radiation transfer through clouds is an important factor in the ability of Numerical Weather Prediction models to correctly describe the weather evolution. Here we present a practical parameterization of both liquid droplets and ice optical properties in the longwave and shortwave radiation. An advanced spectral averaging method is used to calculate the extinction coefficient, single scattering albedo, forward scattered fraction and asymmetry factor (bext, v, f, g), taking into account the nonlinear effects of light attenuation in the spectral averaging. An ensemble of particle size distributions was used for the ice optical properties calculations, which enables the effective size range to be extended up to 570 μm and thus be applicable for larger hydrometeor categories such as snow, graupel, and rain. The new parameterization was applied both in the COSMO limited-area model and in ICON global model and was evaluated by using the COSMO model to simulate stratiform ice and water clouds. Numerical weather prediction models usually determine the asymmetry factor as a function of effective size. For the first time in an operational numerical weather prediction (NWP) model, the asymmetry factor is parametrized as a function of aspect ratio. The method is generalized and is available on-line to be readily applied to any optical properties dataset and spectral intervals of a wide range of radiation transfer models and applications.

Impact of Consistent Semi-Lagrangian Trajectory Calculations on Numerical Weather Prediction Performance

2017 ◽  
Vol 145 (10) ◽  
pp. 4127-4150 ◽  
Author(s):  
Syed Zahid Husain ◽  
Claude Girard
Keyword(s):  
Numerical Weather Prediction ◽  
Numerical Experiments ◽  
Prediction Models ◽  
Weather Prediction ◽  
Forecast Accuracy ◽  
Multiscale Model ◽  
Dynamical Equations ◽  
Numerical Weather ◽  
Trajectory Calculation ◽  
Trajectory Calculations

Inconsistencies may arise in numerical weather prediction models—that are based on semi-Lagrangian advection—when the governing dynamical and the kinematic trajectory equations are discretized in a dissimilar manner. This study presents consistent trajectory calculation approaches, both in the presence and absence of off-centering in the discretized dynamical equations. Both uniform and differential off-centering in the discretized dynamical equations have been considered. The proposed consistent trajectory calculations are evaluated using numerical experiments involving a nonhydrostatic two-dimensional theoretical mountain case and hydrostatic global forecasts. The experiments are carried out using the Global Environmental Multiscale model. Both the choice of the averaging method for approximating the velocity integral in the discretized trajectory equations and the interpolation scheme for calculating the departure positions are found to be important for consistent trajectory calculations. Results from the numerical experiments confirm that the proposed consistent trajectory calculation approaches not only improve numerical consistency, but also improve forecast accuracy.

scholarly journals EMPOL 1.0: a new parameterization of pollen emission in numerical weather prediction models

2013 ◽  
Vol 6 (6) ◽  
pp. 1961-1975 ◽  
Author(s):  
K. Zink ◽  
A. Pauling ◽  
M. W. Rotach ◽  
H. Vogel ◽  
P. Kaufmann ◽  
...  
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Birch Pollen ◽  
Small Scale ◽  
Pollen Emission ◽  
Numerical Weather ◽  
Pollen Concentrations ◽  
Scale Modelling ◽  
Reactive Trace Gases

Abstract. Simulating pollen concentrations with numerical weather prediction (NWP) systems requires a parameterization for pollen emission. We have developed a parameterization that is adaptable for different plant species. Both biological and physical processes of pollen emission are taken into account by parameterizing emission as a two-step process: (1) the release of the pollen from the flowers, and (2) their entrainment into the atmosphere. Key factors influencing emission are temperature, relative humidity, the turbulent kinetic energy and precipitation. We have simulated the birch pollen season of 2012 using the NWP system COSMO-ART (Consortium for Small-scale Modelling – Aerosols and Reactive Trace Gases), both with a parameterization already present in the model and with our new parameterization EMPOL. The statistical results show that the performance of the model can be enhanced by using EMPOL.

Forecasting wave height probabilities with numerical weather prediction models

2005 ◽  
Vol 32 (14-15) ◽  
pp. 1841-1863 ◽  
Author(s):  
Mark S. Roulston ◽  
Jerome Ellepola ◽  
Jost von Hardenberg ◽  
Leonard A. Smith
Keyword(s):  
Wave Height ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Numerical Weather ◽  
Numerical Weather Prediction Models

scholarly journals Spin-up time from switching the microphysics scheme in the assimilation cycle and impacts on the precipitation forecast quality

2021 ◽  
Author(s):  
Sven Ulbrich ◽  
Christian Welzbacher ◽  
Kobra Khosravianghadikolaei ◽  
Michael Hoff ◽  
Alberto de Lozar ◽  
...  
Keyword(s):  
Numerical Weather Prediction ◽  
Lead Time ◽  
Weather Prediction ◽  
Radar Data ◽  
Precipitation Forecast ◽  
Additional Measure ◽  
Microphysics Scheme ◽  
Numerical Weather ◽  
Complementary Approach ◽  
Forecast Quality

<p>The SINFONY project at Deutscher Wetterdienst (DWD) aims to produce seamless precipitation forecast products from minutes up to 12 hours, with particular focus on convective events. While the near future predictions are typically from nowcasting procedures using radar data, the numerical weather prediction (NWP) aims at longer time scales. The lead-time in the latest available forecast is usually too long for merging both the nowcasting and NWP output to produce reliable seamless predictions.</p><p>At DWD, the current forecasts are produced by the short range numerical weather prediction (SRNWP) <span>making use of a</span> continuous assimilation cycle with relatively long cutoff times and using 1-moment microphysics. In order to reduce the differences in the precipitation to the <span>nowcasting </span>on the NWP side, we use two different approaches. First, we reduce the lead-time from the model start by running 1-hourly forecasts based on an assimilation cycle with shorter data cutoff. Secondly, we use new observational systems in the assimilation cycle, such as radar or satellite data to capture and represent strong convective activity. This procedure is called Rapid Update Cycle (RUC). As an additional measure, we introduce a 2-Moment microphysics scheme into the numerical model, resulting in a better representation of the radar reflectivities. In order to keep the model state similar to that of the SRNWP, the RUC is a time limited assimilation cycle starting from forecasts of the SRNWP at pre-defined times.</p><p>The introduction of the 2-Moment scheme leads to a spin-up affecting both the assimilation cycle and the short forecasts. The resulting effects are analysed by comparison with the corresponding assimilation cycle using the 1-Moment scheme. As a complementary approach for the analysis, the routine cycle is run with the 2-Moment scheme. The forecast quality is used as a measure to compare the results with respect to precipitation and additional observed parameters. It is shown in how far the resulting improvements are related to the assimilation and momentum scheme, or to the higher frequency of forecasts.</p>

Sign in / Sign up

Export Citation Format

Share Document