scholarly journals CRITICALITY SAFETY ANALYSIS OF THE DRY CASK DESIGN WITH AIR GAPS FOR RDNK SPENT PEBBLE FUELS STORAGECriticality Safety Analysis of the Dry Cask Design with Air Gaps for RDNK Spent Pebble Fuels Storage

2021 ◽  
Vol 23 (3) ◽  
pp. 123
Author(s):  
Pungky Ayu Artiani ◽  
Yuli Purwanto ◽  
Aisyah Aisyah ◽  
Ratiko Ratiko ◽  
Jaka Rachmadetin ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Thermal Power ◽  
Heat Removal ◽  
Threshold Value ◽  
Safety Analysis ◽  
Spent Fuel ◽  
Air Gaps ◽  
Fuel Elements ◽  
Submerged Conditions ◽  
Criticality Safety

Reaktor Daya Non-Komersial (RDNK) with a 10 MW thermal power has been proposed as one of the technology options for the first nuclear power plant program in Indonesia. The reactor is a High Temperature Gas-Cooled Reactor-type with spherical fuel elements called pebbles. To support this program, it is necessary to prepare dry cask to safely store the spent pebble fuels that will be generated by the RDNK. The dry cask design has been proposed based on the Castor THTR/AVR but modified with air gaps to facilitate decay heat removal. The objective of this study is to evaluate criticality safety through keff  value of the proposed dry cask design for the RDNK spent fuel. The keff  values were calculated using MCNP5 program for the dry cask with 25, 50, 75, and 100% of canister capacity. The values were calculated for dry casks with and without air gaps in normal, submerged, tumbled, and both tumbled and submerged conditions. The results of calculated keff  values for the dry cask with air gaps at 100% of canister capacity from the former to the latter conditions were 0.127, 0.539, 0.123, and 0.539, respectively. These keff values were smaller than the criticality threshold value of 0.95. Therefore, it can be concluded that the dry cask with air gaps design comply the criticality safety criteria in the aforementioned conditions.

Application of TRACE and FRAPTRAN in the Spent Fuel Pool of Chinshan Nuclear Power Plant

2013 ◽  
Vol 479-480 ◽  
pp. 543-547
Author(s):  
Jong Rong Wang ◽  
Hao Tzu Lin ◽  
Wan Yun Li ◽  
Shao Wen Chen ◽  
Chun Kuan Shih
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Cooling System ◽  
Safety Issue ◽  
Water Injection ◽  
Safety Analysis ◽  
Spent Fuel ◽  
Spent Fuel Pool ◽  
Study Case

In the nuclear power plant (NPP) safety, the safety analysis of the NPP is very important work. In Fukushima NPP event, due to the earthquake and tsunami, the cooling system of the spent fuel pool failed and the safety issue of the spent fuel pool generated. In this study, the safety analysis of the Chinshan NPP spent fuel pool was performed by using TRACE and FRAPTRAN, which also assumed the cooling system of the spent fuel pool failed. There are two cases considered in this study. Case 1 is the no fire water injection in the spent fuel pool. Case 2 is the fire water injection while the water level of the spent fuel pool uncover the length of fuel rods over 1/3 full length. The analysis results of the case 1 show that the failure of cladding occurs in about 3.6 day. However, the results of case 2 indicate that the integrity of cladding is kept after the fire water injection.

A study of burnup credit in criticality safety analysis for PBR spent fuel pebbles

2019 ◽  
Vol 132 ◽  
pp. 347-356 ◽  
Author(s):  
Shang-Chien Wu ◽  
Der-Sheng Chao ◽  
Jenq-Horng Liang
Keyword(s):  
Safety Analysis ◽  
Spent Fuel ◽  
Criticality Safety

Application of TRACE and CFD in the Spent Fuel Pool of Chinshan Nuclear Power Plant

2011 ◽  
Vol 145 ◽  
pp. 78-82 ◽  
Author(s):  
Jong Rong Wang ◽  
Hao Tzu Lin ◽  
Yung Shin Tseng ◽  
Chun Kuan Shih
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Cooling System ◽  
Safety Issue ◽  
Safety Analysis ◽  
Spent Fuel ◽  
Energy Research ◽  
Important Work ◽  
Spent Fuel Pool

In the nuclear power plant (NPP) safety, the safety analysis of the NPP is very important work. In Fukushima NPP event, due to the earthquake, the cooling system of the spent fuel pool failed and the safety issue of the spent fuel pool generated. After Fukushima NPP event, INER (Institute of Nuclear Energy Research, Atomic Energy Council, R.O.C.) performed the safety analysis of the spent fuel pool for Chinshan NPP which also assumed the cooling system of the spent fuel pool failed. The geometry of the Chinshan NPP spent fuel pool is 12.17 m × 7.87 m × 11.61 m and the initial condition is 60 ¢J / 1.013 × 105 Pa. In general, the NPP safety analysis is performed by the thermal hydraulic codes. The advanced thermal hydraulic code named TRACE for the NPP safety analysis is developing by U.S. NRC. Therefore, the safety analysis of the spent fuel pool for Chinshan NPP is performed by TRACE. Besides, this safety analysis is also performed by CFD. The analysis result of TRACE and CFD are similar. The results show that the uncovered of the fuels occur in 2.7 days and the metal-water reaction of the fuels occur in 3.5 days after the cooling system failed.

VALIDATION OF A MONTE CARLO MODEL OF THE FORK DETECTOR WITH A CALIBRATED NEUTRON SOURCE

2014 ◽  
Vol 27 ◽  
pp. 1460151
Author(s):  
ALESSANDRO BORELLA ◽  
LIVIU-CRISTIAN MIHAILESCU
Keyword(s):  
Nuclear Power ◽  
Monte Carlo Model ◽  
Measurement Data ◽  
Nuclear Research ◽  
Research Centre ◽  
Spent Fuel ◽  
The Past ◽  
Research Areas ◽  
Fuel Elements ◽  
Comparison Exercise

The investigation of experimental methods for safeguarding spent fuel elements is one of the research areas at the Belgian Nuclear Research Centre SCK•CEN. A version of the so-called Fork Detector has been designed at SCK•CEN and is in use at the Belgian Nuclear Power Plant of Doel for burnup determination purposes. The Fork Detector relies on passive neutron and gamma measurements for the assessment of the burnup and safeguards verification activities. In order to better evaluate and understand the method and in view to extend its capabilities, an effort to model the Fork detector was made with the code MCNPX. A validation of the model was done in the past using spent fuel measurement data. This paper reports about the measurements carried out at the Laboratory for Nuclear Calibrations (LNK) of SCK•CEN with a 252Cf source calibrated according to ISO 8529 standards. The experimental data are presented and compared with simulations. In the simulations, not only was the detector modeled but also the measurement room was taken into account based on the available design information. The results of this comparison exercise are also presented in this paper.

Quantity and Management of Spent Fuel From Prototype and Research Reactors in Germany

2013 ◽  
Author(s):  
Sabine Dörr ◽  
Wilhelm Bollingerfehr ◽  
Wolfgang Filbert ◽  
Marion Tholen
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Storage Management ◽  
Ministry Of Education ◽  
Spent Fuel ◽  
Research Reactors ◽  
Identification Number ◽  
Current State ◽  
Fuel Elements

Within the scope of an R&D project (project identification number FKZ 02 S 8679) sponsored by BMBF (Federal Ministry of Education and Research), the current state of storage and management of fuel elements from prototype and research reactors was established, and an approach for their future storage/management was developed. The spent fuels from prototype and research reactors in Germany that require disposal were specified and were described in regard to their repository-relevant characteristics. As there are currently no casks licensed for disposal in Germany, descriptions of casks that were considered to be suitable were provided. Based on the information provided on the spent fuel from prototype and research reactors and the potential casks, a technical disposal concept was developed. In this context, concepts to integrate the spent fuel from prototype and research reactors into existing disposal concepts for spent fuel from German nuclear power plants and for waste from reprocessing were developed for salt and clay formations.

Sign in / Sign up

Export Citation Format

Share Document