Comparative analysis of shape variation in the cone scales of Larix dahurica and L. cajanderi (Pinaceae)

Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.

Author(s):  
Eva I. Riedlecker ◽  
Gail V. Ashton ◽  
Gregory M. Ruiz

Characteristics of the second gnathopod are traditionally used to distinguish between species of caprellid amphipods. However, these distinctions are often subjective and can be variable within a species. Geometric morphometrics were used to quantitatively assess shape variation of the second gnathopod propodus of three species of caprellids in North America, including the non-native Caprella mutica. Gnathopod shapes of C. mutica specimens from different latitudes revealed distinct morphologies; the factors responsible for the shape variations are unknown. Allometric change of propodus shape was observed in C. mutica. Larger individuals showed a wide array of possible propodus morphologies. Despite this variability, there were clear differences between large specimens of C. mutica and two species native to North America: C. alaskana and C. kennerlyi. The use of geometric morphometrics and the thin-plate spline method can serve to both complement descriptions using traditional keys and aid in identification of non-native species in novel geographical regions.


2013 ◽  
Author(s):  
Jonathan P. Tennant ◽  
Norman MacLeod

Snout shape is a prominent aspect of herbivore feeding ecology, controlling both forage selectivity and intake rate. Many previous investigations have suggested that ruminant feeding classes can be discriminated via snout shape, with grazing and browsing species attributed ‘blunt’ and ‘pointed’ snouts respectively, with an intermediate sub-grouping. This aspect of functional ecology is analysed for the first time using a statistically rigorous geometry-based framework to compare the two-dimensional profiles of the premaxilla in ventral aspect for a large sample of ruminant species. Our results suggest that, when a sample of browsing and grazing ruminants are classified ecologically based on a range of independent indicators of their feeding strategy, they cannot be fully discriminated on the basis of their premaxilla profile shape. Instead, our sample forms a shape variation continuum with overlap between groupings, but with a 78 percent chance of successful categorisation. Moreover, previously used terminology such as ‘pointed’ and ‘blunt’ are largely inadequate for delimiting snout shape varieties, insofar as these terms lack the descriptive power to define the morphological disparity demonstrated. These results suggest that previous attempts to use snout shape as a proxy for feeding style in ruminants may have been biased due to under-sampling of this highly diverse group and to lack of geometric rigour in the assessment of shape data. Alternatively, conflicting or inadequate evidence in defining ‘browsers’ and ‘grazers’ could have caused incorrect assignment to ecological groups, distorting our analyses. The relation between snout shape and body mass are also documented.


2013 ◽  
Vol 16 (2) ◽  
pp. 590-600 ◽  
Author(s):  
Paul G. Sanfilippo ◽  
Alex W. Hewitt ◽  
Jenny A. Mountain ◽  
David A. Mackey

Twin studies are extremely useful for investigating hypotheses of genetic influence on a range of behavioral and physical traits in humans. Studies of physical traits, however, are usually limited to size-related biological characteristics because it is inherently difficult to quantify the morphological counterpart – shape. In recent years, the development of geometry-preserving analytical techniques built upon multivariate statistical methodologies has produced a new discipline in biological shape analysis known as geometric morphometrics. In this study of hand shape analysis, we introduce the reader already familiar with the field of twin research to the potential utility of geometric morphometrics and demonstrate the cross-discipline applicability of methods. We also investigate and compare the efficacy of the 2D:4D ratio, a commonly used marker of sexual dimorphism, to the fully multivariate approach of shape analysis in discriminating between male and female sex. Studies of biological shape variation utilizing geometric morphometric techniques may be completed with software freely available on the Internet and time invested to master the small learning curve in concepts and theory.


2011 ◽  
Vol 61 (6) ◽  
pp. 688-702 ◽  
Author(s):  
Aida Gómez-Robles ◽  
María Martinón-Torres ◽  
José María Bermúdez de Castro ◽  
Leyre Prado-Simón ◽  
Juan Luis Arsuaga

2016 ◽  
Author(s):  
Mónica Nova Delgado ◽  
Jordi Galbany ◽  
Alejandro Pérez-Pérez

The phylogenetic position of many fossil platyrrhines with respect to extant ones is not yet clear. Two main hypotheses have been proposed: the layered or successive radiations hypothesis suggests that Patagonian fossils are Middle Miocene stem platyrrhines lacking modern descendants, whereas the long lineage hypothesis argues for an evolutionary continuity of all fossil platyrrhines with the extant ones. Our geometric morphometric analysis of a 15 landmark-based configuration of platyrrhines' first and second lower molars suggest that morphological stasis, may explain the reduced molar shape variation observed. Platyrrhine lower molar shape might be a primitive retention of the ancestral state affected by strong ecological constraints thoughout the radiation the main platyrrhine families. The Patagonian fossil specimens showed two distinct morphological patterns of lower molars, Callicebus -like and Saguinus -like, which might be the precursors of the extant forms, whereas the Middle Miocene specimens, though showing morphological resemblances with the Patagonian fossils, also displayed new, derived molar patternss, Alouatta- like and Pitheciinae -like, thereby suggesting that despite the overall morphological stasis of molars, phenotypic diversification of molar shape was already settled during the Middle Miocene.


2016 ◽  
Author(s):  
Mónica Nova Delgado ◽  
Jordi Galbany ◽  
Alejandro Pérez-Pérez

The phylogenetic position of many fossil platyrrhines with respect to extant ones is not yet clear. Two main hypotheses have been proposed: the layered or successive radiations hypothesis suggests that Patagonian fossils are Middle Miocene stem platyrrhines lacking modern descendants, whereas the long lineage hypothesis argues for an evolutionary continuity of all fossil platyrrhines with the extant ones. Our geometric morphometric analysis of a 15 landmark-based configuration of platyrrhines' first and second lower molars suggest that morphological stasis, may explain the reduced molar shape variation observed. Platyrrhine lower molar shape might be a primitive retention of the ancestral state affected by strong ecological constraints thoughout the radiation the main platyrrhine families. The Patagonian fossil specimens showed two distinct morphological patterns of lower molars, Callicebus -like and Saguinus -like, which might be the precursors of the extant forms, whereas the Middle Miocene specimens, though showing morphological resemblances with the Patagonian fossils, also displayed new, derived molar patternss, Alouatta- like and Pitheciinae -like, thereby suggesting that despite the overall morphological stasis of molars, phenotypic diversification of molar shape was already settled during the Middle Miocene.


PLoS ONE ◽  
2021 ◽  
Vol 16 (6) ◽  
pp. e0253564
Author(s):  
Leonor Costa Mendes ◽  
Julien Delrieu ◽  
Claudia Gillet ◽  
Norbert Telmon ◽  
Delphine Maret ◽  
...  

The aging process has an impact on mandibular bone morphology and can therefore affect shape sexual dimorphism. Understanding the effect of senescence on mandibular shape changes is particularly important to correctly estimate the sex of an individual and predict age-related conformational modifications. The purpose of this study was to assess age-related changes in mandibular shape and sexual dimorphism. The study sample comprised 160 Multi Slice Computed Tomography examinations of individuals aged 40 to 79 years. Geometric morphometric analysis of fourteen osteometric landmarks was used to examine sexual dimorphism and patterns of mandibular shape variation with age. Results showed that mandibular sexual dimorphism of shape remained significant with aging. Conformational changes occurred between 50 and 70 years and were different for male and female individuals. Females presented earlier and more marked age-related shape changes than males. These observations suggest that mandibular senescence is a sexually dimorphic process since its onset, rate, and the areas subjected to conformational changes differ from male to female individuals. Senescence-related changes present substantial variability, and further investigation is required to determine precisely the age that marks their onset.


Sign in / Sign up

Export Citation Format

Share Document