scholarly journals Experimental Study of Absorbent Hygiene Product devolatilization in a bubbling fluidized bed

Author(s):  
Barbara Malsegna ◽  
Andrea Di Giuliano ◽  
Katia Gallucci

This paper aims to investigate the usage of waste from Absorbent Hygienic Products (AHP) as a fuel for gasification or pyrolysis, two attractive routes to obtain valuable products and dispose of this kind of waste. The study experimentally investigated the devolatilization of coarsely shred-ded materials from diapers, in a laboratory-scale bubbling fluidized bed made of sand, as a rep-resentative preparatory step of above-mentioned thermochemical conversions. Two versions of shredded materials were considered: as-manufactured diapers (AHPam, as a reference), and the cellulosic fraction of sterilized used diapers (AHPus). Results were presented, obtained from physic-chemical characterization of AHPam and AHPus (TGA, CHNS/O, proximate and ultimate analysis, XRF, ICP-AES, SEM-EDS) and their devolatilizations at 500-600-700-800°C, under two different atmospheres (air plus nitrogen, or pure nitrogen as a reference). Generally, temperature had most influenced syngas composition, with better performances under pure nitrogen. At 700-800 °C under pure nitrogen, the highest syngas quality and yield were obtained. For AHPam and AHPus, respectively: (i) H2 richness equaled 29.5 vol% and 23.7 vol%, while hydrocarbons poorness equaled 14.8 vol% and 7.4 vol% on dry, dilution-free basis; (ii) 53.7 Nl 100 gfuel-1 and 46.0 Nl 100 gfuel-1 were produced. Overall, AHP emerged as an interesting fuel for thermochemical conversions.

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2399
Author(s):  
Barbara Malsegna ◽  
Andrea Di Giuliano ◽  
Katia Gallucci

This paper aims to investigate the usage of waste from Absorbent Hygienic Products (AHP) as a fuel for gasification or pyrolysis, two attractive routes to obtain valuable products and dispose of this kind of waste. The study experimentally investigated the devolatilization of coarsely shredded materials from diapers, in a laboratory-scale bubbling fluidized bed made of sand, as a representative preparatory step of the above-mentioned thermochemical conversions. Two versions of shredded materials were considered: as-manufactured diapers (AHPam, as a reference), and the cellulosic fraction of sterilized used diapers (AHPus). Results were presented, obtained from physical-chemical characterization of AHPam and AHPus (TGA, CHNS/O, proximate and ultimate analyses, XRF, ICP-AES, SEM-EDS), as well as from their devolatilizations at 500–600–700–800 °C under two different atmospheres (air plus nitrogen, or pure nitrogen as a reference). Generally, temperature influenced syngas composition the most, with better performances under pure nitrogen. At 700–800 °C under pure nitrogen, the highest syngas quality and yield were obtained. For AHPam and AHPus, respectively: (i) H2 equaled 29.5 vol% and 23.7 vol%, while hydrocarbons equaled 14.8 vol% and 7.4 vol% on dry, dilution-free basis; (ii) 53.7 Nl and 46.0 Nl of syngas were produced, per 100 g of fuel. Overall, AHP emerged as an interesting fuel for thermochemical conversions.


Fuel ◽  
2019 ◽  
Vol 253 ◽  
pp. 1414-1423 ◽  
Author(s):  
Cornelius E. Agu ◽  
Christoph Pfeifer ◽  
Marianne Eikeland ◽  
Lars-Andre Tokheim ◽  
Britt M.E. Moldestad

2014 ◽  
Vol 61 ◽  
pp. 643-647 ◽  
Author(s):  
Jan Skvaril ◽  
Anders Avelin ◽  
Jan Sandberg ◽  
Erik Dahlquist

2018 ◽  
Vol 46 (5) ◽  
pp. 556-573
Author(s):  
Hamdy M. Shafey ◽  
Walid J. Al-Nahari ◽  
Emad H. El-Zohri ◽  
Aliaa O. Abbas

Author(s):  
Gretta Larisa Aurora Arce Ferrufino ◽  
Ivonete Ávila ◽  
Carlos Manuel Romero Luna ◽  
Fernando Manente Perrella Balestieri

Sign in / Sign up

Export Citation Format

Share Document