Metal Release From Fly Ash Upon Leaching With Sulfuric Acid or Acid Mine Drainage

1998 ◽  
Vol 1998 (1) ◽  
pp. 713-721
Author(s):  
J. Skousen ◽  
D. K. Bhumbla
2021 ◽  
Vol 11 (9) ◽  
pp. 3910
Author(s):  
Saba Shirin ◽  
Aarif Jamal ◽  
Christina Emmanouil ◽  
Akhilesh Kumar Yadav

Acid mine drainage (AMD) occurs naturally in abandoned coal mines, and it contains hazardous toxic elements in varying concentrations. In the present research, AMD samples collected from an abandoned mine were treated with fly ash samples from four thermal power plants in Singrauli Coalfield in the proximate area, at optimized concentrations. The AMD samples were analyzed for physicochemical parameters and metal content before and after fly ash treatment. Morphological, geochemical and mineralogical characterization of the fly ash was performed using SEM, XRF and XRD. This laboratory-scale investigation indicated that fly ash had appreciable neutralization potential, increasing AMD pH and decreasing elemental and sulfate concentrations. Therefore, fly ash may be effectively used for AMD neutralization, and its suitability for the management of coalfield AMD pits should be assessed further.


2010 ◽  
Vol 106 (1/2) ◽  
Author(s):  
Wicleffe Musingarimi ◽  
Marla Tuffin ◽  
Donald Cowan

An arsenic resistant Bacillus sp. UWC was isolated from fly ash acid mine drainage (FA-AMD) neutralised solids. A genomic library was prepared and screened in an arsenic sensitive mutant Escherichia coli strain for the presence of arsenic resistance (ars) genes. Sequence analysis of a clone conferring resistance to both sodium arsenite and sodium arsenate revealed homologues to the arsR (regulatory repressor), arsB (membrane located arsenite pump), arsC (arsenate reductase), arsD (second regulatory repressor and a metallochaperone) and arsA (ATPase) genes from known arsenic resistance operons. The Bacillus sp. UWC arsRBCDA genes were shown to be arranged in an unusual manner with the arsDA genes immediately downstream of arsC.


2020 ◽  
Vol 989 ◽  
pp. 559-563
Author(s):  
Ashimkhan T. Kanayev ◽  
Khussain Valiyev ◽  
Aleksandr Bulaev

The goal of the present work was to perform bioleaching of uranium from low grade ore from Vostok deposit (Republic of Kazakhstan), which was previously subjected to long-term acid leaching. The ore initially contained from 0.15 to 0.20% of uranium in the form of uraninite, but ore samples used in the study contained about 0.05% of uranium, as it was exhausted during acid leaching, and uranium was partially leached. Representative samples of ore were processed in 1 m columns, leach solutions containing 5, 10, 20 g/L of sulfuric acid and bacterial cells (about 104) were percolated through the ore. Leaching was performed at ambient temperature for 70 days. In one of the percolators, the leaching was performed with leaching solution containing 10 g/L of H2SO4, cells of A. ferrooxidans, and 0.5 g/L of formaldehyde. Leaching with the solution containing 5, 10, and 20 g/L of sulfuric acid made it possible to extract 50, 53, and 58% of uranium. Addition of formaldehyde in leach solution led to the decrease in uranium extraction extent down to 37%. Thus, the results of the present work demonstrated that uranium ore exhausted during long-term acid leaching may be successfully subjected to bioleaching, that allows extracting residual quantities of uranium. Leaching rate of uranium from exhausted ore depended on both sulfuric acid concentration and microbial activity of bacteria isolated from acid mine drainage, formed on uranium deposit. In the same time, acid mine drainage may be used as a source of inoculate, to start bioleaching process.


2020 ◽  
Vol 159 ◽  
pp. 106611 ◽  
Author(s):  
Rosicky Methode Kalombe ◽  
Tunde Victor Ojumu ◽  
Vinny Ndjate Katambwe ◽  
Michael Nzadi ◽  
Denzil Bent ◽  
...  

Fuel ◽  
2008 ◽  
Vol 87 (8-9) ◽  
pp. 1637-1650 ◽  
Author(s):  
W.M. Gitari ◽  
L.F. Petrik ◽  
O. Etchebers ◽  
D.L. Key ◽  
E. Iwuoha ◽  
...  

2012 ◽  
Vol 161 ◽  
pp. 200-204 ◽  
Author(s):  
Shuai Wang ◽  
Gang Zhao ◽  
Zhong Nan Wang ◽  
Qian Zhang ◽  
Hong Zhong

Acid solution and copper-containing acid mine drainage (AMD) was treated by neutralization-adsorption process. The results showed that pH can be adjusted to 4.0 by adding 10g·L-1calcite in acid solution with pH=1.0. Adsorption and desorption performance of poly(hydroxamic acid) (PHA) resin for Cu2+and Fe3+ions were investigated by column tests. The results showed that adsorption capacities of PHA for Cu2+and Fe3+ions were satisfying, and the metals adsorbed on PHA can be eluted by sulfuric acid solution effectively. AMD of Dexing copper mine of Jiangxi was treated as a sample. The results showed that 1.5g·L-1calcite can remove almost all of the Fe3+ion, and Cu2+ion can be removed by PHA and then be eluted by sulfuric acid solution with adsorption ratio of 98.95% and elution ratio of 98.50%, separately.


2006 ◽  
Vol 41 (8) ◽  
pp. 1729-1747 ◽  
Author(s):  
M. W. Gitari ◽  
L. F. Petrik ◽  
O. Etchebers ◽  
D. L. Key ◽  
E. Iwuoha ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document