Multistage Evolution of Proterozoic Crust of East Antarctica by the Example of the Filla Terrane (Rauer Islands): New Geological and Isotope Data

2021 ◽  
Vol 62 (5) ◽  
pp. 557-575
Author(s):  
N.L. Alekseev ◽  
I.A. Kamenev ◽  
E.V. Mikhalskyd ◽  
A.N. Larionov ◽  
I.N. Kapitonov ◽  
...  

Abstract —The paper presents new data on the Rauer Islands, one of the unique objects of the East Antarctic Shield. The interest in this area is triggered by its complex geologic structure, including both Archean and Proterozoic fragments of the Earth’s crust, and by its multiphase formation. A detailed scheme of the geologic structure of the area is proposed, new petrologic complexes are revealed, and the stages of tectonomagmatic activity at ~1400–1320 Ma and 1150 Ma are reliably dated. This serves as a factual basis for comparison the study area with other regions of East Antarctica. Based on the geological and isotope data obtained, the Meso–Neoproterozoic Filla Terrane in the area of the Rauer Islands is recognized. It is composed of metamorphic and primarily intrusive rocks, whose protoliths formed in the time interval 1400–950 Ma. Three periods of tectonothermal activity have been established in the Filla Terrane: Mid-Mesoproterozoic (1400–1320 Ma), Meso–Neoproterozoic (1150–886 Ma), and early Cambrian (536–504 Ma). The first period is the formation time of Mesoproterozoic crust, and it is time-correlated with the tectonogenesis phase in the adjacent Rayner province. The second period corresponds to the later phase of tectonothermal activity in the Rayner province. In the Filla Terrane, this period can be divided into two intervals, 1150–1100 Ma and 1010–886 Ma. The former interval is treated as intense crustal growth in the course of granitoid and mantle magmatism. The latter interval is a period of tectonothermal processes accompanied by intense deformations, high-temperature metamorphism, and intrusion of porphyritic granitoids. Apparently, the gap between the first and the second intervals is the time of deposition of the sedimentary protolith of paragneisses, which, together with the surrounding rocks, underwent high-temperature metamorphism and deformations at 950–914 Ma. The synchronous evolution of the Archean block and the Filla Terrane began at least within 1100–1000 Ma. The youngest, early Cambrian period of tectonic activity coincides with the development of local low-temperature mylonite zones and the intrusion of synkinematic pegmatite veins. Thus, the tectonothermal evolution of the Filla Terrane includes almost the same main phases of crustal growth and transformation as the Rayner province. This indicates that the Filla Terrane is a fragment of the Rayner province, which accreted to the Archean terrane at least in the late Mesoproterozoic.

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 943
Author(s):  
Mami Takehara ◽  
Kenji Horie ◽  
Tomokazu Hokada

Ultra-high temperature (UHT) metamorphism plays an essential role in the development and stabilization of continents through accretionary and collisional orogenesis. The Napier Complex, East Antarctica, preserves UHT metamorphism, and the timing is still debated. U–Pb zircon geochronology integrated with rare earth element (REE) and oxygen isotope was applied to a garnet-bearing quartzo-feldspathic gneiss to confirm the timing of UHT metamorphism in Fyfe Hills in the western part of the Napier Complex. The zircons are analyzed using a sensitive high-resolution ion microprobe (SHRIMP). The cathodoluminescence observation and U–Pb ages allowed us to classify the analytical domains into three types: inherited domains (Group I), metamorphic domains (Group II), and U–Pb system disturbed domains (Group III). The REE patterns of Group II are characterized by a weak fractionation between the middle REE and heavy REE, which reinforces the above classification. The 207Pb*/206Pb* ages of Group II have an age peak at 2501 Ma, therefore, the gneiss experienced high temperature metamorphism at 2501 Ma. δ18O of zircons are homogeneous among the three groups (5.53 ± 0.11‰, 5.51 ± 0.14‰, and 5.53 ± 0.23‰), which suggests re-equilibration of oxygen isotopes after metamorphism at ca. 2501Ma under dry UHT conditions.


Geosciences ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 394
Author(s):  
Manuel Martín-Martín ◽  
Francesco Guerrera ◽  
Mario Tramontana

Four main unconformities (1–4) were recognized in the sedimentary record of the Cenozoic basins of the eastern External Betic Zone (SE, Spain). They are located at different stratigraphic levels, as follows: (1) Cretaceous-Paleogene boundary, even if this unconformity was also recorded at the early Paleocene (Murcia sector) and early Eocene (Alicante sector), (2) Eocene-Oligocene boundary, quite synchronous, in the whole considered area, (3) early Burdigalian, quite synchronous (recognized in the Murcia sector) and (4) Middle Tortonian (recognized in Murcia and Alicante sectors). These unconformities correspond to stratigraphic gaps of different temporal extensions and with different controls (tectonic or eustatic), which allowed recognizing minor sedimentary cycles in the Paleocene–Miocene time span. The Cenozoic marine sedimentation started over the oldest unconformity (i.e., the principal one), above the Mesozoic marine deposits. Paleocene-Eocene sedimentation shows numerous tectofacies (such as: turbidites, slumps, olistostromes, mega-olistostromes and pillow-beds) interpreted as related to an early, blind and deep-seated tectonic activity, acting in the more internal subdomains of the External Betic Zone as a result of the geodynamic processes related to the evolution of the westernmost branch of the Tethys. The second unconformity resulted from an Oligocene to Aquitanian sedimentary evolution in the Murcia Sector from marine realms to continental environments. This last time interval is characterized as the previous one by a gentle tectonic activity. On the other hand, the Miocene sedimentation was totally controlled by the development of superficial thrusts and/or strike-slip faults zones, both related to the regional geodynamic evolutionary framework linked to the Mediterranean opening. These strike-slip faults zones created subsidence areas (pull-apart basin-type) and affected the sedimentation lying above the third unconformity. By contrast, the subsidence areas were bounded by structural highs affected by thrusts and folds. After the third unconformity, the Burdigalian-Serravallian sedimentation occurred mainly in shallow- to deep-water marine environments (Tap Fm). During the Late Miocene, after the fourth unconformity, the activation of the strike-slip faults zones caused a shallow marine environment sedimentation in the Murcia sector and a continental (lacustrine and fluvial) deposition in the Alicante sector represented the latter, resulting in alluvial fan deposits. Furthermore, the location of these fans changed over time according to the activation of faults responsible for the tectonic rising of Triassic salt deposits, which fed the fan themselves.


PalZ ◽  
2021 ◽  
Author(s):  
Xingliang Zhang ◽  
Degan Shu

AbstractThe Cambrian Explosion by nature is a three-phased explosion of animal body plans alongside episodic biomineralization, pulsed change of generic diversity, body size variation, and progressive increase of ecosystem complexity. The Cambrian was a time of crown groups nested by numbers of stem groups with a high-rank taxonomy of Linnaean system (classes and above). Some stem groups temporarily succeeded while others were ephemeral and underrepresented by few taxa. The high number of stem groups in the early history of animals is a major reason for morphological gaps across phyla that we see today. Most phylum-level clades achieved their maximal disparity (or morphological breadth) during the time interval close to their first appearance in the fossil record during the early Cambrian, whereas others, principally arthropods and chordates, exhibit a progressive exploration of morphospace in subsequent Phanerozoic. The overall envelope of metazoan morphospace occupation was already broad in the early Cambrian though it did not reach maximal disparity nor has diminished significantly as a consequence of extinction since the Cambrian. Intrinsic and extrinsic causes were extensively discussed but they are merely prerequisites for the Cambrian Explosion. Without the molecular evolution, there could be no Cambrian Explosion. However, the developmental system is alone insufficient to explain Cambrian Explosion. Time-equivalent environmental changes were often considered as extrinsic causes, but the time coincidence is also insufficient to establish causality. Like any other evolutionary event, it is the ecology that make the Cambrian Explosion possible though ecological processes failed to cause a burst of new body plans in the subsequent evolutionary radiations. The Cambrian Explosion is a polythetic event in natural history and manifested in many aspects. No simple, single cause can explain the entire phenomenon.


2000 ◽  
Vol 179 (1) ◽  
pp. 387-399 ◽  
Author(s):  
A. Henk ◽  
F. von Blanckenburg ◽  
F. Finger ◽  
U. Schaltegger ◽  
G. Zulauf

Sign in / Sign up

Export Citation Format

Share Document