3D-Printed Screw-Rod Auxiliary System for Unstable Atlas Fractures: A Retrospective Analysis

2020 ◽  
Author(s):  
Chao Wu ◽  
Jiayan Deng ◽  
Tao Li ◽  
Jian Pan ◽  
Haigang Hu ◽  
...  
Keyword(s):  
Blood Loss ◽  
Operation Time ◽  
Auxiliary System ◽  
Occipitocervical Fusion ◽  
Fracture Displacement ◽  
Significant Difference ◽  
Post Operation ◽  
3D Printed ◽  
Atlas Fractures

Abstract Objective To develop and validate a 3D-printed screw-rod auxiliary system for unstable atlas fractures.Methods Fourteen patients who underwent occipitocervical fusion with the 3D-printed screw-rod auxiliary system enrolled in our hospital from 2017 to 2019 were reviewed. The operation time, blood loss and radiation times during the operation were recorded. The maximum fracture displacement values pre- and post-operation were measured based on CT imaging. All screw grades were evaluated after surgery. The O-C2 angle and OCI angle pre-operation, post-operation and at the last follow-up were measured. The dysphagia scale 3 and 12 months after surgery and the NDI 3 and 12 months after surgery were assessed.Results The average surgery time, average blood loss and average radiation times for the 14 patients were 112.14 minutes, 171.43 ml and 5.07 times, respectively. There was a significant difference in maximum fracture displacement between pre- and post-operation values (P<0.05). A total of 56 screws were inserted; 3 screws were classified as grade 1, and the others were classified as grade 0. There was a significant difference in the O-C2 and OCI angles from pre-operation values to values 3 days after the operation (P=0.002, P<0.05); there was no significant difference in the O-C2 or OCI angle from 3 days after the operation to the last follow-up (P=0.079; P=0.201). The dysphagia scales of two patients were assessed as mild 3 months after surgery, and the others were assessed as normal. All patients’ dysphagia scores returned to normal 12 months after surgery. The average NDI and average neck VAS scores 12 months after surgery were 2.53 and 8.41, respectively.Conclusion It is clinically feasible with the assistance of a screw-rod auxiliary system to perform occipitocervical fusion for unstable atlas fractures. This novel technique can objectively restore the occipitocervical angle of patients, and there are few postoperative complications.

scholarly journals Is It Necessary to Reduce Thoracolumbar Compression Fractures  with Intermediate Screws in the Fractured Vertebra?

2021 ◽  
Author(s):  
ZeJun Xing ◽  
Shuai Hao ◽  
XiaoFei Wu
Keyword(s):  
Blood Loss ◽  
Body Height ◽  
Pedicle Screws ◽  
Operation Time ◽  
Short Segment ◽  
Compression Fractures ◽  
Significant Difference ◽  
Before And After ◽  
Screw Group

Abstract PurposeTo compare the efficacy and safety of percutaneous short-segment pedicle screws fixation (PPSF) with or without intermediate screws (IS) for the treatment of thoracolumbar compression fractures.MethodsFrom January 2016 to March 2019, a retrospective study of 38 patients with thoracolumbar compression fractures conducted. The patients were divided into a 4-screw group (without IS) and a 6-screw group (with IS) according to whether pedicle screws were placed in the fractured vertebrae. Combined positional reduction effects with the technique of pre-contoured lordotic rods were used to reduce the fracture by lengthening the anterior column of the fractured vertebrae. The posterior structure of the fractured vertebrae was undertaken as the fulcrum point for both groups. The operation time, intra-operative blood loss, visual analogue scale (VAS), anterior vertebral body height (AVBH), segment kyphosis（SK）before and after operation and complications were recorded.ResultsAlthough the operation time and blood loss in the 6-screw group were higher than in the 4-screw group, difference was not significant (P＞0.05). There was no significant difference in VAS, AVBH and SK between the two groups (P＞0.05). Nevertheless, these results were significant differences between the preoperative and the immediate postoperative, between preoperative and follow-up groups (P < 0.001). No neurologic injury was observed in either groups. ConclusionsIn the treatment of thoracolumbar compression fractures, percutaneous short-segment pedicle screws fixation without intermediate screws in the 4-screw construct may obtain the same clinical effect as that in the 6-screw construct.

scholarly journals Suprapatellar versus infrapatellar approaches in the treatment of tibia intramedullary nailing ： A retrospective cohort study

2019 ◽  
Author(s):  
Yiliang Cui ◽  
Xingyi Hua ◽  
Florian Schmidutz ◽  
Jian Zhou ◽  
Zongsheng Yin ◽  
...  
Keyword(s):  
Blood Loss ◽  
Intramedullary Nailing ◽  
Functional Outcomes ◽  
Operation Time ◽  
Tibial Shaft ◽  
Shaft Fractures ◽  
Significant Difference ◽  
Special Surgery ◽  
Tibial Shaft Fractures

Abstract Background: Tibial shaft fractures are routinely managed with intramedullary nailing (IMN). An increasingly accepted technique is the suprapatellar (SP) approach. The purpose of this study was to compare the clinical and functional outcomes of knee joint after tibia IMN through an suprapatellar (SP) or traditional infrapatellar (IP) approach. Methods: Retrospective analysis was performed in patients with tibial shaft fractures that were treated with IMN through a SP or IP approach between 01/01/2014 and 31/12/2016. The clinical and functional outcomes of the knee were assessed with the Hospital for Special Surgery (HSS) Knee Score. Secondary outcomes included the operation time and intraoperative blood loss. Results: A total of 50 patients/fractures (26 IP and 24 SP) with a minimum follow-up of 15 months were evaluated. All fractures were OTA 42. No significant differences were found between the two groups in age, gender, side of fractures, operation time, intra-operative blood loss, and follow-up time. No significant difference was seen in HSS score ( P = 0.62) between them. Sub analysis of all the HSS components scores revealed no significant differences between pain ( P = 0.57), the stand and walk ( P = 0.54), the need for walking stick ( P = 0.60) and extension lag ( P = 0.60). The other HSS components showed full scores (IP 10 vs. SP 10) in both approaches, including muscle force, flexion deformity and stability components. The range of motion (ROM) component score was superior in the IP group ( P = 0.04) suggesting a higher ROM. Conclusions: Both SP and IP approach results in equivalent overall HSS knee scores. However, for the HSS component, the IP approach was superior to SP approach regarding the ROM.

scholarly journals Suprapatellar versus infrapatellar approaches in the treatment of tibia intramedullary nailing: a retrospective cohort study

2019 ◽  
Vol 20 (1) ◽  
Author(s):  
Yiliang Cui ◽  
Xingyi Hua ◽  
Florian Schmidutz ◽  
Jian Zhou ◽  
Zongsheng Yin ◽  
...  
Keyword(s):  
Blood Loss ◽  
Intramedullary Nailing ◽  
Functional Outcomes ◽  
Operation Time ◽  
Tibial Shaft ◽  
Shaft Fractures ◽  
Significant Difference ◽  
Special Surgery ◽  
Tibial Shaft Fractures

Abstract Background Tibial shaft fractures are routinely managed with intramedullary nailing (IMN). An increasingly accepted technique is the suprapatellar (SP) approach. The purpose of this study was to compare the clinical and functional outcomes of knee joint after tibia IMN through an suprapatellar (SP) or traditional infrapatellar (IP) approach. Methods Retrospective analysis was performed in patients with tibial shaft fractures that were treated with IMN through a SP or IP approach between 01/01/2014 and 31/12/2016. The clinical and functional outcomes of the knee were assessed with the Hospital for Special Surgery (HSS) Knee Score. Secondary outcomes included the operation time and intraoperative blood loss. Results A total of 50 patients/fractures (26 IP and 24 SP) with a minimum follow-up of 15 months were evaluated. All fractures were OTA 42. No significant differences were found between the two groups in age, gender, side of fractures, operation time, intra-operative blood loss, and follow-up time. No significant difference was seen in HSS score (P = 0.62) between them. Sub analysis of all the HSS components scores revealed no significant differences between pain (P = 0.57), the stand and walk (P = 0.54), the need for walking stick (P = 0.60) and extension lag (P = 0.60). The other HSS components showed full scores (IP 10 vs. SP 10) in both approaches, including muscle force, flexion deformity and stability components. The range of motion (ROM) component score was superior in the IP group (P = 0.04) suggesting a higher ROM. Conclusions Both SP and IP approach results in equivalent overall HSS knee scores. However, for the HSS component, the IP approach was superior to SP approach regarding the ROM.

Sequential correction using satellite rod for severe thoracic idiopathic scoliosis: an effective method to optimize deformity correction

2021 ◽  
pp. 1-7
Author(s):  
Yang Li ◽  
Benlong Shi ◽  
Dun Liu ◽  
Zhen Liu ◽  
Xu Sun ◽  
...  
Keyword(s):  
Blood Loss ◽  
Idiopathic Scoliosis ◽  
Deformity Correction ◽  
Operation Time ◽  
Consecutive Series ◽  
Radiographic Parameters ◽  
Significant Difference ◽  
Correction Surgery ◽  
Thoracic Idiopathic Scoliosis

OBJECTIVE The aim of this paper was to compare the radiographic and clinical outcomes between the sequential correction (SC) technique and the traditional 2-rod correction (TC) technique in patients with severe thoracic idiopathic scoliosis (STIS) undergoing posterior-only correction surgery. METHODS Records of a consecutive series of STIS patients undergoing posterior-only correction surgery between October 2013 and October 2017 with more than 2 years of follow-up were reviewed. The radiographic parameters were assessed preoperatively, postoperatively, and at the last follow-up. Radiographic parameters, operative time, blood loss, and complications were compared between the two groups. RESULTS A total of 33 patients were included in the SC group, and 21 patients were included in the TC group. There was no significant difference in age, sex, or deformity magnitude (93.6° ± 7.8° vs 89.8° ± 6.6°, p = 0.070) preoperatively between groups. The operation time was shorter in the SC group than in the TC group (251.5 ± 42.8 minutes vs 275.4 ± 39.8 minutes, p = 0.020), while both blood loss (1284.6 ± 483.3 vs 1398.0 ± 558.4 ml, p = 0.432) and number of fused levels (13.1 ± 2.8 vs 13.6 ± 2.4, p = 0.503) were similar between the groups. Compared with the TC group, patients in the SC group had a higher correction rate (55.8% ± 9.2% vs 45.7% ± 8.8%, p < 0.001), less coronal (1.1° ± 0.81° vs 2.9° ± 0.93°, p < 0.001) and sagittal (1.5° ± 0.96° vs 2.1° ± 0.64°, p = 0.015) correction loss at the 2-year follow-up, and a lower incidence of intraoperative pedicle screw pullout (14.3% vs 23.8%, p = 0.026). CONCLUSIONS The SC technique could significantly and practically reduce the difficulty of rod installation with better deformity correction outcomes than the traditional TC technique. The SC technique was an effective alternative for patients with STIS.

scholarly journals Three‐dimensional‐printed customized prosthesis for pubic defect: clinical outcomes in 5 cases at a mean follow‐up of 24 months

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Yuqi Zhang ◽  
Li Min ◽  
Minxun Lu ◽  
Jie Wang ◽  
Yitian Wang ◽  
...  
Keyword(s):  
Blood Loss ◽  
Clinical Outcomes ◽  
Weight Bearing ◽  
Three Dimensional ◽  
Operation Time ◽  
Pubic Bone ◽  
Type Iii ◽  
3D Printed ◽  
The Mean

Abstract Background Pubic defects resulting from type III hemipelvectomy are commonly not reconstructed due to the need to preserve the weight-bearing axis. However, the opening of the anterior pelvic ring will inevitably lead to increased pelvic instability. To improve long-term pelvic stability, three-dimensional (3D)-printed customized prostheses were designed to reconstruct pubic defects. This study presents and evaluates the short-term clinical outcomes and complications from the use of this construct. Methods Five patients who underwent type III hemipelvectomy and 3D-printed customized prosthesis reconstruction at our institution between 2017 and 2019 were retrospectively analysed. Operation time and blood loss during the operation were recorded. Local and functional recovery was assessed. Prosthetic position and osseointegration were evaluated. Oncology results and complications were recorded. Results The prostheses consisted of three with stems and two without. The mean follow-up time was 23.6 months. At the last follow-up, all five patients were alive with no evidence of disease. No deep infections or local recurrence had occurred. The mean blood loss and mean intraoperative time were 1680 ml and 294 min, respectively. The mean functional MSTS score at the final follow-up was 29.8. Fretting wear around the prosthetic stem was found in 3 patients, while bone wear on the normal-side pubis was found in 2 patients. Osseointegration was observed in all patients. Conclusions 3D-printed customized prostheses for reconstructing pubic bone defects after type III hemipelvectomy showed acceptable early outcomes. The good outcomes were inseparable from the precision prosthesis design, strict surgical procedures, and sensible postoperative management.

scholarly journals Application of open-door laminoplasty with ARCH plate fixation in cervical intraspinal tumors

BMC Surgery ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Zhi-Chao Wang ◽  
Shu-Zhong Li ◽  
Xin-Fei Qu ◽  
Chu-Qiang Yin ◽  
Yuan-Liang Sun ◽  
...  
Keyword(s):  
Blood Loss ◽  
Cobb Angle ◽  
Plate Fixation ◽  
Operation Time ◽  
Open Door ◽  
Successful Operation ◽  
X Ray ◽  
Significant Difference ◽  
Before And After

Abstract Background The open-door laminoplasty is an effective procedure for the treatment of cervical spondylotic myelopathy. However, little information is available about the surgical results of open-door laminoplasty in the treatment of intraspinal tumors. In the present study, we aimed to investigate the clinical effect of open-door laminoplasty with ARCH plate fixation in the treatment of cervical intraspinal tumors. Methods This was a retrospective study. From January 2013 to May 2018, 38 patients (13 males and 25 females, the average age of 44 ± 17 years) with cervical intraspinal tumors underwent open-door laminoplasty with ARCH plate fixation in our hospital. The operation time, blood loss, pre- and postoperative visual analog scale (VAS), and Japanese Orthopedic Association (JOA) scores were determined. To determine the radiographic outcomes, cervical X-ray film and magnetic resonance imaging (MRI) were performed before and after the operation, and cervical X-ray sagittal film was used to measure Cobb angle. The clinical data before and after the operation were compared by t-test. Results A total of 38 patients underwent a successful operation and demonstrated primary healing. The average operation time was 113 ± 12 min. The average blood loss was 120 ± 19 mL. All patients were followed up for 26.1 ± 2.8 months, and the final follow-up time was more than 24 months. VAS scores were much better at 24 months after operation compared with those before the operation, which were decreased from 6.1 ± 1.1 to 1.4 ± 0.7 (t = 32.63, P < 0.01). The JOA score was improved from 9.9 ± 1.5 to 15.5 ± 0.6 (t = − 18.36, P < 0.01), and the mean JOA recovery rate was 79% ± 11% at 24 months after the operation. There was no significant difference in Cobb angle between pre-operation and 24 months after the operation, which was 9.8 ± 2.6 and 10.3 ± 3.1 respectively (t = − 0.61, P > 0.05). Neither spinal malalignment on the coronal plane nor displacement of the laminoplasty flap was observed on postoperative cervical X-ray and MRI examinations at the final follow-up. Conclusions Open-door laminoplasty with ARCH plate fixation was a safe and effective surgical approach for the treatment of cervical intraspinal tumors.

scholarly journals A Minimally Invasive Technique Using Cortical Bone Trajectory Screws Assisted by 3D-Printed Navigation Templates in Lumbar Adjacent Segment Degeneration

2021 ◽  
Author(s):  
Kun He ◽  
Chunke Dong ◽  
Hongyu Wei ◽  
Feng Yang ◽  
Haoning Ma ◽  
...  
Keyword(s):  
Blood Loss ◽  
Minimally Invasive ◽  
Cortical Bone ◽  
Clinical Efficacy ◽  
Revision Surgery ◽  
Operation Time ◽  
Adjacent Segment Degeneration ◽  
Adjacent Segment ◽  
3D Printed

Abstract Background: Revision surgery of adjacent segment degeneration (ASD) commonly need to expose and remove the original fixation. In order to minimize the trauma, reduce the operation time and blood loss, we introduce a minimally invasive lumbar revision technique using cortical bone trajectory (CBT) screws assisted by three-dimensional(3D) printed navigation templates.Methods: From April 2017 to October 2019, 18 patients with ASD underwent revision surgery with CBT screws assisted by 3D-printed templates in our hospital. All the operation data, including operation time, blood loss, incision length were recorded. We evaluated the clinical efficacy using the visual analogue scale (VAS), the Oswestry Disability Index (ODI), and the Japanese Orthopedic Association (JOA) score. X-ray and Computed Tomography (CT) scans were used to evaluate the stability of CBT screws fixation, the accuracy of screws, and the fusion rate.Results: The mean follow-up was 22.4±4.7 months (12-31m), the VAS, ODI, and JOA score were analyzed by SPSS 21.0 and showed significant improvement at 2-weeks and the last follow-up compared with preoperative data(P<0.05). 76 CBT screws were inserted with navigation templates, 2 screws were Grade B, other screws were all Grade 0 or A. Changes of intervertebral height showed good stability of CBT screws fixation(P>0.05). All the patients had satisfactory fusion results.Conclusion: Revision surgery of ASD with CBT screws assisted by 3D-printed navigation templates has satisfactory clinical efficacy with advantages of the short operation time, small incision, and less blood loss.

scholarly journals Three-dimensional-printed customized prosthesis for pubic defect: Clinical outcomes in 5 cases at a mean follow-up of 17 months

2020 ◽  
Author(s):  
YQ Zhang ◽  
Li Min ◽  
Minxun Lu ◽  
J Wang ◽  
Yitian Wang ◽  
...  
Keyword(s):  
Blood Loss ◽  
Clinical Outcomes ◽  
Three Dimensional ◽  
Operation Time ◽  
Musculoskeletal Tumor Society ◽  
Type Iii ◽  
Msts Score ◽  
3D Printed ◽  
The Mean

Abstract Background This study is to present and evaluate the short-term clinical outcomes and associated complications of 3D-printed customized prostheses for pubic defect reconstruction. Methods 5 patients receiving type III hemipelvectomy and three-dimensional-printed customized prosthesis reconstruction at our institution between 2017 and 2019 were retrospectively analyzed in this study. The operation time and blood loss during operation were recorded. The local and functional recovery was assessed by the physical examination and Musculoskeletal Tumor Society (MSTS) score. The prosthetic position and Osseointegration were evaluated by imaging examination. Oncology result and complications were recorded. Functional comparisons with MSTS score of patients grouped by resection extent were done. Results Of 5 cases, the prosthese consist of the type with stem (3, 60%) and the type without stem (2, 40%). Mean follow-up period was 17.6 months (range, 10–26 months). All 5 patients were alive with no evidence of disease. No deep infection and local recurrence occurred. The mean blood loss and mean intraoperative time was 1680 ml (range, 300 to 3700 ml) and 294 min (range, 180 to 430 min). The mean functional MSTS score at the final follow-up was 29.8 (range, 29–31). 1 male patient complained erectile dysfunction. Fretting wear around prosthetic stem was found in 3 patients while bone wear on the normal side pubis was found in 2 patients. Osseointegration was observed in all patients. Conclusion 3D-printed customized prostheses could be a feasible option to reconstruct the pubic bone defects after type III hemipelvectomy. The good outcomes are inseparable from precision prostheses design and strict surgical procedures.

scholarly journals Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yuan-Wei Zhang ◽  
Xin Xiao ◽  
Wen-Cheng Gao ◽  
Yan Xiao ◽  
Su-Li Zhang ◽  
...  
Keyword(s):  
3D Printing ◽  
Blood Loss ◽  
Three Dimensional ◽  
Operation Time ◽  
Varus Deformity ◽  
Conventional Group ◽  
Intraoperative Blood Loss ◽  
Cubitus Varus ◽  
Guide Plate ◽  
Significant Difference

Abstract Background This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. Material and methods Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. Results Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents’ excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). Conclusions The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

scholarly journals Microscopic extra-laminar sequestrectomy (MELS) for the treatment of hidden zone lumbar disc herniation: report of the surgical technique, patient selection, and clinical outcomes

BMC Surgery ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Chunxiao Wang ◽  
Yao Zhang ◽  
Xiaojie Tang ◽  
Haifei Cao ◽  
Qinyong Song ◽  
...  
Keyword(s):  
Blood Loss ◽  
Learning Curve ◽  
Clinical Outcomes ◽  
Lumbar Disc Herniation ◽  
Disc Herniation ◽  
Lumbar Disc ◽  
Operation Time ◽  
Operation Duration ◽  
The Mean

Abstract Background The area which located at the medial pedicle, posterior vertebral body and ventral hemilamina is defined as the hidden zone. Surgical management of hidden zone lumbar disc herniation (HZLDH) is technically challenging due to its difficult surgical exposure. The conventional interlaminar approach harbors the potential risk of post-surgical instability, while other approaches consist of complicated procedures with a steep learning curve and prolonged operation time. Objective To introduce microscopic extra-laminar sequestrectomy (MELS) technique for treatment of hidden zone lumbar disc herniation and present clinical outcomes. Methods Between Jan 2016 to Jan 2018, twenty one patients (13 males) with HZLDH were enrolled in this study. All patients underwent MELS (19 patients underwent sequestrectomy only, 2 patients underwent an additional inferior discectomy). The nerve root and fragment were visually exposed using MELS. The operation duration, blood loss, intra- and postoperative complications, and recurrences were recorded. The Visual Analog Scale (VAS), Oswestry Disability Index (ODI), and the modified MacNab criteria were used to evaluate clinical outcomes. Postoperative stability was evaluated both radiologically and clinically. Results The mean follow-up period was 20.95 ± 2.09 (18–24) months. The mean operation time was 32.43 ± 7.19 min and the mean blood loss was 25.52 ± 5.37 ml. All patients showed complete neurological symptom relief after surgery. The VAS and ODI score were significantly improved at the final follow-up compared to those before operation (7.88 ± 0.70 vs 0.10 ± 0.30, 59.24 ± 10.83 vs 11.29 ± 3.59, respectively, p < 0.05). Seventeen patients (81%) obtained an “excellent” outcome and the remaining four (19%) patients obtained a “good” outcome based the MacNab criteria. One patient suffered reherniation at the same level one year after the initial surgery and underwent a transforaminal endoscopic discectomy. No major complications and postoperative instability were observed. Conclusions Our observation suggest that MELS is safe and effective in the management of HZLDH. Due to its relative simplicity, it comprises a flat surgical learning curve and shorter operation duration, and overall results in reduced disturbance to lumbar stability.

Sign in / Sign up

Export Citation Format

Share Document