Case Report: Locking Plate for Cubitus Varus Correction in a 7-Year-Old Girl With Osteogenesis Imperfecta

Background: Cubitus varus deformity is a common complication of untreated elbow fractures in children. However, cubitus varus in osteogenesis imperfecta (OI) children is a rare but challenging situation. To the author's knowledge, this is the first study discussing the correction of cubitus varus deformity in patient with OI.Case Presentation: Here we report a case of a 7-year-old OI girl with cubitus varus deformity due to a supracondylar fracture of humerus 3 year ago. The patient's parent gave a history of supracondylar fracture of left humerus in 2015. Without medical intervention, the patient was admitted into our institution for corrective surgery with the diagnosis of osteogenesis imperfecta and cubitus varus deformity in the left arm.Result: Medications including calcium, vitamin D and bisphosphonates were administered before the corrective surgery of cubitus varus, and a single locking plate was used to fixate the osteotomy. After the surgery, the appearance and range of motion (ROM) of the left arm was almost normal. Combined with gradual rehabilitation, the ROM of the left arm was normal without pain during daily use within the 1-year follow up. The hardware was removed as the nailing of the forearm fractures was performed at the same time. In the latest follow-up in September 2021, the appearance and ROM of the left arm was normal.Conclusion: Cubitus varus is a common deformity in children with elbow injuries, but it presents a challenging situation in compound fractures in OI patients. Locking plate combined with meticulous pharmacological intervention provides a good option for corrective surgery of cubitus varus in patients with OI.

Closed reduction and percutaneous pinning vs open reduction and internal fixation in pediatric lateral condylar humerus fractures displaced by > 4 mm: an observational cross-sectional study

Background Although open reduction and internal fixation (ORIF) is recommended for lateral condylar humerus fractures (LCHFs) displaced by > 4 mm, several studies have reported the use of closed reduction and percutaneous pinning (CRPP) to treat LCHFs with significant displacement. However, little is known about the clinical differences between these two surgical techniques. This study aimed to compare the therapeutic effects of CRPP and ORIF in treating LCHFs displaced by > 4 mm. Methods We retrospectively reviewed pediatric LCHFs displaced by > 4 mm treated with either CRPP or ORIF at our center from June 2019 to October 2020. Song and Milch fracture classifications were used. Variables such as age at injury, sex, side injured, fracture displacement, fracture type, operating time, postoperative treatment, and complications were compared between the two techniques. Results One hundred twenty LCHFs met inclusion criteria. There were 36 Milch type I and 84 type II LCHFs, and 69 Song stage 4 and 51 stage 5 LCHFs. CRPP was performed in 45 cases and ORIF in 75 cases. No differences were found in age, sex, side injured, preoperative displacement, postoperative displacement, and length of immobilization between the CRPP and ORIF groups. There was a difference between operation time and pin duration. The CRPP group had shorter operation times and pin duration, and required no additional operations to remove internal pins. The average follow-up duration was 13.9 months. All patients achieved fracture union, and no complications such as infection, nonunion, delayed union, osteonecrosis, fishtail deformity, cubitus varus or valgus, or pain were recorded during follow-up. Bone spurs, lateral prominences, and decreased carrying angle were common complications in all groups. No obvious cubitus varus was observed. Unaesthetic scars were only observed in the ORIF groups. No differences in range of motion or elbow function was found among the different therapies. Conclusions Both CRPP and ORIF can achieve satisfactory clinical outcomes in treating LCHFs displaced by > 4 mm. No differences were found in complications or prognoses between the two groups. However, CRPP shows some advantages over ORIF, like less invasive surgery, no obvious scarring, and no need for secondary surgery with anesthesia for pin removal.

Tips and pitfalls of reduction and fixation in displaced supracondylar fractures in children

Supracondylar humeral fractures are the most common injury of the elbow in children. Compared to flexion type fractures, extension type fractures are more common, up to 98%. Gartland classification has been used to guide the management of this injury, which is based on the extent of the displacement. If not adequately managed, completely displaced (type III) fractures may have a higher incidence of concomitant injury or complications, including neurovascular injury, compartment syndrome, or cubitus varus. Closed reduction followed by percutaneous pinning has been suggested as the standard operative method for the displaced supracondylar humeral fractures. However, these fractures can be challenging to reduce, with the traditional technique of closed reduction. Lateral-entry pinning is known as a sufficient method of fixation for this injury. However, the lateral pin only fixation technique may also result in loss of reduction in some particular patterns of fractures, such as fractures with medial column comminution. We discuss and describe the reduction techniques of completely displaced supracondylar humeral fractures, including technical tips and pitfalls for closed reduction and open reduction. We also discuss indications of medial pinning, and its safe method, when the lateral-entry pins may not achieve adequate stability.

Corrective Osteotomy in cubitus varus deformity in children: A prospective study

Background and Aim: Cubitus varus deformity is the most common late complication aftersupracondylar fracture of the distal humerus in children, incidence varying from 4% to 58%. Thepresent study was done to evaluate the results of dome osteotomy. Material and Methods: Thisprospective study was conducted in a tertiary care hospital over 16 months. In all patients humerus-elbow wrist angle was measured on both sides and the correction needed was calculated. The lateralcondyle prominence index (LCPI) was calculated by anteroposterior view radiographs of thedeformed and the normal elbow in full extension by (AB-BC)/AC. Dome osteotomy with para tricepsapproach was used. Pre and post-operative carrying angle of elbow, range of motion and lateralprominence indices were compared. Results: The age of patients ranged from 3 to 15 years with amean age of 8.47±3.14 years. Preoperative carrying angle of normal side ranged from 80 to 140and that of effected side ranged from -23 to -13 and the difference was statistically significant(p<0.05). LCPI ranged from -8.4 to 5.9%. The majority of cases had LCPI >2.7%. As compared to,an improvement in carrying angle at defect side was observed to be 28.41±2.15 which wassignificant (p<0.05). At baseline mean LCPI was 0.39±3.87% which changed to -0.86±3.47%, themean change of this was significant (p=0.01). baseline Conclusion: Dome osteotomy is a relativelytechnically demanding technique for correction of cubitus varus deformity but with a betterfunctional outcome without being associated with lateral condyle prominence.

An Innovative and Cost-Advantage CAD Solution for Cubitus Varus Surgical Planning in Children

The study of CAD (computer aided design) modeling, design and manufacturing techniques has undergone a rapid growth over the past decades. In medicine, this development mainly concerned the dental and maxillofacial sectors. Significant progress has also been made in orthopedics with pre-operative CAD simulations, printing of bone models and production of patient-specific instruments. However, the traditional procedure that formulates the surgical plan based exclusively on two-dimensional images and interventions performed without the aid of specific instruments for the patient and is currently the most used surgical technique. The production of custom-made tools for the patient, in fact, is often expensive and its use is limited to a few hospitals. The purpose of this study is to show an innovative and cost-effective procedure aimed at prototyping a custom-made surgical guide for address the cubitus varus deformity on a pediatric patient. The cutting guides were obtained through an additive manufacturing process that starts from the 3D digital model of the patient’s bone and allows to design specific models using Creo Parametric. The result is a tool that adheres perfectly to the patient’s bone and guides the surgeon during the osteotomy procedure. The low cost of the methodology described makes it worth noticing by any health institution.

Outcome of three dimensional osteotomy for cubitus varus deformity

<p><strong>Background:</strong> Cubitus varus is the most common angular deformity resulting from supracondylar fracture of the humerus in children and adults. There are several options for correcting this deformity, but three dimensional osteotomy is now a popular method for the operative treatment of cubitus varus deformity. Objective of current study was to evaluate clinical and radiological outcome of three dimensional corrective osteotmy for cubitus varus deformity.</p><p><strong>Methods</strong>: This prospective interventional study was conducted in the department of orthopaedic surgery, BSMMU, Shahbag, Dhaka from January 2016 to September 2020. Within this period, total 40 cases of cubitus varus deformity, age ranging from 8-20 years that has the inclusion criteria was enrolled as a study sample with proper consent. All the data were analyzed statistically by using SPSS-22.</p><p><strong>Results:</strong> The results of present study showed significantly improved carrying angle, range of motion, internal rotation angle at the time of final follow-up period of six months or more. The outcome of the subjects was graded as excellent in 16 (40%), good in 18 (45%), fair in 4 (10%) and poor in 2 (5%) patients. Excellent, good and fair results were considered as satisfactory outcome and only poor result was considered as unsatisfactory outcome.</p><p><strong>Conclusions:</strong> After analyzing the results of present study it can be concluded that three dimensional osteotomy is a safe technique with satisfactory outcome in treatment of cubitus varus deformity.</p>