scholarly journals Kinetic Study on Degradation of Micro-organics by Different UV-based advanced oxidation processes in EfOM Matrix

Author(s):  
Donghai Yuan ◽  
Guangyu Liu ◽  
Fei Qi ◽  
Jinggang Wang ◽  
Yingying Kou ◽  
...  

Abstract Effluent Organic Matter (EfOM) contains a large number of substances that are harmful to both the environment and human health. To avoid the negative effects of organic matter in EfOM, advanced treatment of organic matter is an urgent task. Four typical oxidants (H2O2, PS, PMS, NaClO) and UV-combined treatments were used to treat micro-contaminants in the presence or absence of effluent organic matter (EfOM), because the active radical species produced in these UV-AOPs are highly reactive with organic contaminants. However, the removal efficiency of trace contaminants was greatly affected by the presence of EfOM. The degradation kinetics of two representative micro-contaminants (benzoic acid (BA) and para-chlorobenzoic acid(p-CBA)) was significantly reduced in the presence of EfOM, compared to the degradation kinetics in its absence. Using the method of competitive kinetics, with BA, p-CBA and 1,4-dimethoxybenzene (DMOB) as probes, the radicals (HO·, SO4-·, ClO·) proved to be the key to reaction species in advanced oxidation processes. UV irradiation on EfOM was not primarily responsible for the degradation of micro-contaminants. The second-order rate constants of the EfOM with radicals were determined to be (5.027±0.643)×102(SO4-·), (3.192±0.153)×104 (HO·) and 1.35×106 (ClO·) (mg-C/L)-1·s-1. In addition, this study evaluated the production of three radicals based on the concept of Rct, which can better analyze its reaction mechanism.

2004 ◽  
Vol 4 (4) ◽  
pp. 113-119 ◽  
Author(s):  
C.A. Murray ◽  
S.A. Parsons

Advanced oxidation processes have been reported to have the potential to remove natural organic matter from source waters. Of these Fenton's reagent, photo-Fenton's reagent and titanium dioxide photocatalysis are the three most promising processes. Compared to conventional coagulation/flocculation processes they have higher removal efficiencies in terms of both dissolved organic carbon and UV254 absorbance. Under optimum reaction conditions all three remove over 80% dissolved organic carbon and 0% UV254 absorbance. In addition the enhanced removal of natural organic matter leads to a corresponding reduction in the formation of disinfection by-products following chlorination of the treated water. Advanced oxidation processes give enhanced removal of organic species ranging from low to high molecular weight while coagulation/flocculation is inefficient at removing low molecular weight species. One additional benefit is all three processes produce less residuals compared to conventional coagulation, which is advantageous as the disposal of such residuals normally contributes a large proportion of the costs at water treatment works.


1992 ◽  
Vol 27 (1) ◽  
pp. 69-96 ◽  
Author(s):  
William J. Cooper ◽  
Michael G. Nickelsen ◽  
David E. Meacham ◽  
Thomas D. Waite ◽  
Charles N. Kurucz

Abstract Advanced oxidation processes for the removal and destruction of hazardous organic chemicals in water and wastewater is a research area of increasing interest. Advanced oxidation processes generally consider the hydroxyl radical, OH-, the major reactive transient species. A novel process under development, utilizing high energy electrons, extends this concept to include the simultaneous formation of approximately equal concentrations of oxidizing and reducing species. Irradiation of aqueous solutions results in the formation of the aqueous electron, e−aq, hydrogen atoms, H-, and OH-. These reactive transient species initiate chemical reactions capable of destroying organic compounds in aqueous solution. This paper presents data on the removal of six common organic contaminants that have been studied at the Electron Beam Research Facility. The removal and the factors affecting removal were determined. This study focuses on halogenated ethenes, benzene and substituted benzenes. Removal is described in waters of different quality, including potable water, and raw and secondary wastewater. Removal efficiencies ranged from 85 to >99% and varied with water quality, solute concentration, dose and compound.


Author(s):  
Olivier Lesage ◽  
Laurent Falk ◽  
Michael Tatoulian ◽  
Diego Mantovani ◽  
Stéphanie Ognier

Sign in / Sign up

Export Citation Format

Share Document